8165/GE/SMB/T-83/2025-26 COMPREHENSIVE MAINT IN MD ACCN THROUGH IVRS BASED COMPLAINT RECTIFICATION UNDER GE SAMBA

Amount

Resecuring or easing and adjusting without taking down of shutter Area exceeding 1.00 sqm but not exceeding 2.00 sqm each of complete all as specified and directed

Taking down shutters of any description exc 1.00 Sqm and n.exc. 2.00 sqm each and removing from the site all as specified & directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 Sqm & n.exc 4 Sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site all as specified.

Supply and fixing Factory made, plain framed, panelled shutter (two Panel) 35mm thick, 2nd class Hardwood with lock rail and panel of 9 mm B.W.P commercial ply. The size of rail and stiles as per as per IS:1003 (Part-I),kiln seasoned and chemically pressure treated including two coat of synthetic enamel paint over a coat of primer complete all as specified complete all as specified and as directed

Supply and fixing 35mm thick 2nd Class hard wood glazed,gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars,stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) , including two coat of synthetic enamel paint over a coat of primer Complete all as specified

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and directed.

S&F Factory made solid PVC Moulded door shutter 28 to 30 mm thick (Stiles) with particle board core with 2, 4 ,or 6 raised panel design with 2 mm thick moulded Prelam PVC sheet on the front face & 2 mm Prelam PVC sheet on back face, to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the framme at site as per specification and drawing, complete all as specified and as directed

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F in repair 150mm ordinary rat rail, rod pattern mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick in CM 1:6 incl Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size 450 x 350 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4, incl Dismantling of wall tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, all as specified and directed.

M&L vitrified joint free tiles 8-9 mm thick ( sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6incl Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises complete all as specified and directed.

S&F in repairs 300mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F in repair butt hinges 100mm, cold rolled medium weight mild steel all as specified.

S&F in repair 125mm size, extruded aluminium alloy handles, fabricated type, anodised.

S&F in repair 150mm long aluminium tower bolts (ISI Marked) extruded type all as specified.

S&F 100mm Hasp and staple, safety type, aluminum anodised including bolt to hinge plate and fixed with screws complete

S&F Continuous (Piano) hinges, mild steel , bright finish or electrogalvanised with wide of flaps 30mm in repairs all as specified and directed.

M&L for Taking down cement plaster on brick or concrete surface and description including raking out joints hacking for key scrubbing down with water,

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement mixed with including scaffolding at any height complete all as specified and directed by Engineer-in-charge.

M&L Rendering 10mm thick in cement mortar 1:6 on fair aces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L two coats of cement base paint over a coat of primer on newly plastered surface of wall including preparation of surface and curing after applying each coat complete all as specified and directed.

M&L one coat of cement base paint on wall including preparation of old surface complete all as specified directed .

M&L Complete removal of existing treatment from internal surfaces of walls by wire brushing and washing, rubbing down and stopping of surfaces , applying 1mm wall care putty on walls and make the surface of level, clean and repair disturbed edgs of bricks/concrete walls finish to even and smooth and applying two coat of oil bound distemper over a coat of primer all as spd and directed .

S&F Rotational moulded polyethelyne water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe fly nuts incl Dismantling water tanks (Capacity of tank exc 250 Ltr but n exc 500 Ltr) and removing from site, complete all as specified.

S&F Rotational moulded polyethelyne water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively and fly nuts incl Dismantling water tanks (Capacity of tank exc 500 Ltr but n exc 1000 Ltr) and removing from site, complete all as specified.

M&L 20mm Gun metal globe or gate walve with iron wheeled head, screwed both ends for iron and fixed in repairs

Disconnecting existing tanks, exc 250 ltr n exc 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.complete all as specified & directed

Disconnecting existing tanks, exc 500 ltr n exc 1000 ltr setting aside (orlowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.complete all as specified & directed

S&F in repair vitreous china wash down water closet pan (Orissa patern) white with integral foot rest of of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' and 'S' trap complete incl making good to floor complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan and trap, (pedestal pattern) including fixing bolts and connecting to drain pipe, including white seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete all as specified and directed and including 'P' and 'S' trap complete incl making good to floor complete all as specified and directed.

S&F in reapairs Plastic water closet seat cover, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F 100mm m cast iron sanitary connection ‘S’ /'P' trap, with branch 370 to 450mm long

S&F low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washer and waste including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overallsize 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repairs S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F in repair bib taps long nose, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair fancy type Pillar tap cast copper alloy chromium plated with capstan heads screwed down high pressure or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F in repairs 15mm bore angle valve chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair centre hole basin mixture valve, cast copper alloy fancy type 15mm brass chromium plated mixer (central hole basin mixer w/o pop up waste system) for mixing hot & cold water screwed down for iron pipe , complete all as specified.

Supply and fixing in repair wall mixer non telephonic shower arrangement with connecting legs and wall flanges, chromium plated, complete all as specified.

S&F in repair Sink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified.

S&F in repair Sink Cock with swinging casted spout (Wall Mounted model) with wall flange complete all as specified.

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings)

Supply and fixing in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified fixed with stainless steel wire staples.

Supply and fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple

S&F in repair PVC cabinate mirror of size 450x600 mm fixed with screw and PVC gutty on wall complete all as specified and directed

S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane including Hacking out old brocken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, gazed with putty or fixed with beads.all as specified.

S & F 3.0 mm thick figured Sheet glass pin headed type and glazing with oil putty and pins in square n exc 0.5 sq. m in each pane including Hacking out old brocken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, gazed with putty or fixed with beads.all as specified and directed.

S&F GI tube 15mm bore medium grade galvanised ISI marked with all fittings incl taking up or down GI pipes 15mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, complete on walls complete all as specified and directed.

S&F GI tube 20mm bore medium grade galvanised with all fittings and fixed to short length incl Taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, complete all as specified and directed.

S & F Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample, The over all size (60x60x22cm) fixed with steel fastners or steel screw, complete all as specified and directed.

S & F Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (30"x36"x10") fixed with steel fastners or steel screw complete.

S & F in repairs for floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor over all length of cover plate 140mm thick complete all as specified and directed.

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6 mtr mean radius complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

S&F in repair 20mm ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified.

S&F in repairs SS Tubular towel rail of chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete.

S&F in repair Towel Ring Chromium platedfixed with brass screws and wooden/plastic cleats (Minimum weight 90gms)

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair chromium plated shower rose 125 mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."

S&Fin repairs soap dish dish type of milld steel Chromium plated and wooden/plastic cleats , complete all as specified and as directed.

S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F for Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 50cm long

S&F for Corner glass shelf assembly consisting of 5mm thick sheet glass shelf 30cm wide with chromium plated bracket guard and railing.

S&F in repairs concealed type 15mm bore angle valve chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge.

S&F for 75mm bore ,PVC (SWR) 'floor' trap as in repair complete all as specified and directed.

S&F for PVC waste pipe 32mm dia, 60 cm long for WHB with cup, fixed in repairs complete.

S&F grating round 100 mm size of stain less steel as in repair, complete all as specified and directed.

Material & labour for applying one coat of synthetic enamel paint on old wooden surface on any description not otherwise described over 10cm width or girth including preparation of old painted surfaces all as specified and directed .

All as per above here-in-before, but one coat of synthetic enamel paint on old steel surfaces all as specified and directed.

Supply and fixing in repair brass face for CP/Brass Bib tap, Angle/Stop cock, Pillar cock, wall mixer, WHB mixer, etc for 15 mm bore pipe complete all as specified and as directed.

S&F PVC long bend for flushing cistern all as specified and directed by Engineer-in-Charge.

S&F in repairs stainless steel coupling of any size for sink all as specified and directed.

Taking down of old/unserviceable kitchen cabinet/cupboard including all fixture and fitting, complete all as specified and directed. Note: For measurement superficial area in elevation shall be measured.

S&F factory made 18 mm (+0.7mm) thick HDHMR Board manufacured by an ISO 9001-2008 certified company. HDHMR Board for Shelf/Partitions/Drawer , One side lemination and other side balancing white lamination and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per manufacturer's specifications and drawing and as directed.

Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed .

Cleaning of blocked WC any type,Gully traps,nahni trap,floor trap including and up to first manhole with manual labour as well flushing with water making the WC seat operational, including depositing sludge in borrow pits including digging of pits. Covering with excavated earth at a suitable depth all as specified and directed .

S&F in repair aluminium bottom door seal with brushes, length 1.2 mtr, fix with screw, suitable for wooden door complete all as specified.

Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed

Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed.

Supply and fixing UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed .

Supply and fixing, UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed .

Supply and fixing, UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed.

M&L for point wiring in repair for light/fan controlled by one switch with 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable in existing PVC concealed conduit terminated in new anodise pressed steel sunken box having thickness not less than 2 mm with 3 mm thick ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed boxes, including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour including taking down of old existing wiring any type and all as speicified. Note: Colour coding is to be maintained (Ph-Red, N-Black, Half-Yellow, Earth-Green).

All as per items no. 89.00 here-in-before but for call Bell point complete all as specified and directed.

All as per items no. 89.00 here-in-before but for one 5 pin 5 Amps socket outlet independent board complete all as specified and directed.

All as per items no. 89.00 here-in-before but for one 3 pin 5 Amps socket outlet on same board complete all as specified and directed.

M&L for point wiring in repair for light/fan controlled by one switch with 2.5 Sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable in existing PVC concealed conduit terminated in new anodise pressed steel sunken box having thickness not less than 2 mm with 3 mm thick ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 4 Sqmm PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed boxes, including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour including taking down of old existing wiring any type and all as speicified. Note: Colour coding is to be maintained (Ph-Red, N-Black, Half-Yellow, Earth-Green).

S & F in replacement of switch piano flush type one way 5 Amps SP 240 Volts complete all as specified and directed.

S & F in replacement of switch piano flush type one way 15 Amps SP 240 Volts complete all as specified and directed.

S & F in replacement of socket outlet 2 in 1, 3 pin 5 amps flush type 240 Volts complete all as specified and directed.

S & F in replacement of socket outlet 2 in 1, 5 pin 5 and 15 amps flush type 240 Volts complete all as specified and directed.

S & F in replacement of switch bell push, flush type, 5 amp one way complete all as specified and directed.

S & F in replacement of bell electric heavy duty Ding Dong type 230 volts single pole complete and all as specified.

S & F in replacement of old u/s fan regulator with fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required or directed

S & F in replacement of existing old u/s switch socket combination with socket combination Polycarbonate body ,5 pin , 5 Amp flush type with pvc box all as specified and directed.

S & F in replacement of existing old u/s switch socket combination with socket combination Polycarbonate body ,5 pin , 15 Amp flush type with pvc box all as specified and directed.

Supply & fixing in replacement of old unserviceable capacitor 2.5 mfd ISI marked complete all as spd.

All as per Srl item No 103 above but 3.15mfd complete all as spd.

S & F in replacement of existing old u/s ceiling rose with ceiling rose Polycarbonate body surface bakelite 2 to 3 terminals, 230 volts.

S & F in replacement of existing old u/s lamp holder with lamp holder batten type polycarbonate body with back plate for batten fitting all as directed.

S & F in replacement of existing old u/s submain wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in and including concealed PVC conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed.

S & F in replacement of existing old u/s submain wiring with two single core PVC insulated flexible copper conductor cable of size 10 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 10 Sqmm as earth lead in and including concealed PVC conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed.

S & F in replacement of existing old u/s tube light fitting with batten type 18/20 watt energy efficient tube light fittings LED complete with minimum 3.5/4 feet long with all accessories prewired and making connection with copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fittings complete all as specified and as directed.

S & F in replacement of LED Bulk head light fitting 1 X 9/10 watts cool Daylight (CDL) round type premium quality diffuser for even distribution of light complete , connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required.

S & F in replacement of existing old u/s tube light fitting with batten type 10 watt energy efficient tube light fittings LED complete with minimum 2 feet long with all accessories prewired and making connection with copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fittings complete all as specified and as directed.

S & F in replacement of LED lamp 7 watt , 230 volts retrofit type complete all as spd and directed by Engr-in-chrage.

S & F in replacement of LED lamp 15 watt , 230 volts retrofit type complete all as spd and directed by Engr-in-chrage.

S & F in replacement of LED lamp 12 watt , 230 volts retrofit type complete all as spd and directed by Engr-in-chrage.

S & F in replacement of sheet metal enclosure 4 way , with SPN DB's ( grouted in walls) double door type IP-43 Protection. Isolated Neutral,Door earthing, cement spill protector, IK-08 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge

S & F in replacement of sheet metal enclosure 8 way, with SPN DB's ( grouted in walls) double door type IP-43 Protection. Isolated Neutral,Door earthing, cement spill protector, IK-08 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge

S & F in replacement of sheet metal enclosure 12 way, with SPN DB's ( grouted in walls) double door type IP-43 Protection. Isolated Neutral,Door earthing, cement spill protector, IK-08 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge

Supply and fix in replacement of existing old u/s MCB SPN with MCB SPN ,240 volts, 32 amps, with rupturing capacity 10 KA, complete all as spd and directed by Engr-in-chrage.

Supply and fix in replacement of existing old u/s MCB SPN with MCB SPN ,240 volts 40 amps, with rupturing capacity 10 KA, complete all as spd and directed by Engr-in-chrage.

Supply and fix in replacement of existing old u/s MCB SPN with MCB SPN ,240 volts any rating from 63 amps, with rupturing capacity 10 KA, complete all as spd and directed by Engr-in-chrage.

Supply and fix in replacement of existing old u/s MCB TPN with 63 amp MCB TPN ,415 volts breaking capacity 10 KA, complete all as spd and directed by Engr-in-chrage.

S & F of sheet metal enclosures distribution boards, double door ,VTPN, 415 volts 4 ways (one incoming three phase & twelve out goings single phase )for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 16 KA=01 NO (for incoming ) (b) MCB SP 63 amps = 04 Nos (for outgoings) . ( Note :- (i)The DB shall be VTPN series . (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble properly crimped.(iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost .

M&L for Replacement of unserviceable MCCB 100 Amps current carrying capacity 16 KA , AC 415 Volts three pole complete all as specified and directed. including dismentling the existing with all connections & fixing the new with all connections all as directed by Engg-in-charge.

Supply and fix in replacement MCB single pole 240 volts any rating 6 to 32 amps, with rupturing capacity 10 KA, complete all as specified and as directed.

Supply and fix in replacement MCB single pole 240 volts any rating 40 amps, with rupturing capacity 10 KA, complete all as specified and as directed.

Supply & fixing in repair of Hylum sheet 5x5 to 10 x 12 inches for fixing of switches, sockets etc including cutting for fixing on existing or new sunken box with brass screw complete all as specified and directed by Engr-in-charge

S & F High performance IP66 LED Streetlight 35 watt, housing made of die-cast aluminium, with street optic lens,with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5 sqmm from ceiling rose, and 35W LED light etc. drawn through and including 32mm bore GI light grade protecion pipe upto 1.5 m length with suitable fixing accessories on walls, complete all as specified and as directedcomplete all as specified and as directed.

S & F in replacement Gang Box for 15 Amp Switch socket combined including 15 Amp combination complete all as specified and directed.

S & F in replacement Gang Box for 5 Amp Switch socket combined including 5 Amp combination complete all as specified and directed.

S & F for providing/cutting the round/square hole of required size in wall finishing the disturbed surfaces as per existing finishes complete all as spd and supply and fixing MS ventilation fans single phase, 230 volts, 225/230 mm or 9" H.D EX Fan (900 RPM) complete and supply and grounting the ragged bolts in wall, fixing the frame on the exhaut side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 Sqmm copper cable from ceiling rose to exhaust fan motor and MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed.

Supply and fixing switch modular 6amps 230 volts one way switch.

S&F socket 6Amps AC 230 VOLTS 2/3 pin combined 2 modular type complete all as specified and as directed.

S&F socket 6A/16Amps AC 230 VOLTS 2/3 pin combined 2 modular type complete all as specified and as directed.

Supply and fixing switch modular 16amps AC 230 volts one way switch complete all as specified and as directed..

Supply and fixing modular fan regulator step type120W-2module

Supply and fixing modular Bell push 6amps 230 volts 1 module

Each visit of tradesmen for attending same complaint site again

Note: (i) Purchase of software i.e. VYNUS Solutions deemed to be included in rate quoted by the contractor. (ii) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account. (iii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum. Rate quoated above items No.01 to 137 here in before inclusive provision as under : Making arrangement for establishment of centralized complaint centre in the existing building as under :- (a) Infrastructure required in Complaint cell i.e. computer, telephone, furniture, stationary, transport and other necessary items/materials to establish a new complaint centre able to receive and manage complaints from the users by all means ie Manual complaint mechanism, Telephonic complaints mechanism, SMS complaint Mechanism and e-mail complaint mechanism through automation tools/application i.e Service Request Tracking and Response System (STARS) developed by VYNUS SOLUTIONS and to maintain a consolidated list of complaints and its redressal mode indicating all its relevant data. (b) Computer data operator shall be able to manage all the necessary activities and having qualification as Graduate in any discipline with minimum one year certificate course of computer applications (from a Govt recognized institute), (c ) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract (d) Provision of communication facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints before change of eight hour shift. (g) Provision of motorized conveyance for deployment to all tradesmen under this contract. (h) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No/ telephone

(j) On lodging the complaint, the Complaint No. will be assigned for reference . Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen. (k) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. (l) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, Reasons for not attending , probable time required for attending the pending complaints etc . (m) Timing of complaints will be 9:00 AM to 6:00 PM including sundays and holidays. (n) JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard. (o) AGE will visit the complaint cell at least thrice a week and GE at least once a weak to check the efficacy of the system and record their remarks accordingly. (p) Recovery for not attending each complaint after 48 hrs of lodging of complaint online shall be Rs. 400.00 for each 24 hrs. Note : Contractor shall be responsible for followings :- (i) Installation of landline telephone connection with internet broadband facility, obtaining SIM cards for mobile phones for supervisor and workers, deployed by the contractor. (ii) Payment of telephone bills, internet charges, mobile bills, expenses etc shall be borne by the contractor and no claim whatsoever on this account will be admissible by the department.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 1,63,265.00 and any other reduction if any from quoted amount.

M/S RAJESH SHARMA & CO. (BID ID -3504718)

M/S VIRENDERA BUILDERS (BID ID -3498219)

SIDDAHANT ENTERPRISES (BID ID -3502270)