BATTERY CHARGER

The Bidder shall be a manufacturer and should have a minimum experience of 5years prior to this notification in designing, manufacturing, testing of equipment/materials of either similar or both similar & higher rating/capacity to the on specified and being offered

The Bidder shall also furnish performance certificate of at least 50% of Battery Chargers specified in the present enquiry OR higher voltage class issued by state owned Electricity utilities/Generating utilities only and issuing officer shall not be below the rank of Executive Engineer or equivalent Division Head. The performance certificate shall be indicating the capacity, make, name of the sub-Division where it is installed, date of commissioning etc., in order to show that tendered materials/equipments of this bid were in successful operation for at least two years as on the date of bid opening. The Bidder shall furnish Certificate not older than five years as on the date of bid opening

The bidder or manufacturer of Tendered material/equipment shall have full fledged service center in India for complete after sales service of the Tendered material/equipment. The complete after sales service of the Tendered material/ equipment shall be provided within reasonable time and the same has to be guaranteed for the entire contract period. The bidder shall furnish the details of service center in India.

In case the type test reports for the specified equipment/material in the present enquiry are older than 5 years or if one/some of the type test reports are not available for the specified equipment/material in the present enquiry, in that case the bidder shall give an undertaking agreeing to conduct all type tests on the 1st Unit or any other unit at the discretion of KPTCL in a NABL Accredited Laboratory if order is placed on the firm without affecting the Delivery Schedule and at no extra cost to KPTCL

Bidders shall have to upload the type test certificates of the material/equipment specified in the present enquiry as per the relevant IS standards

The Bidder shall furnish Type Test Certificates not older than five years as on the date of bid opening for having conducted successful type tests in a NABL accredited test house as per the relevant IS standards on the equipment/material specified in the bid

The bidder should have manufactured at least 50% of the quantity of Tendered material/equipment

The bidder shall be approved vendor of KPTCL. (optional) (Bidders have to furnish the supporting Documents)

The Bidder should furnish the self declaration stating the above & upload the same along with the other documents in the relevant field in the kppp portal, failing which the offer is liable to be rejected.

Disqualification for non-performance: The bidder should not have been disqualified for non-performance in any of the Government utilities in the past five years

In case bidder is a holding company, MAAT shall be that of holding company only (i.e. excluding its subsidiary / group companies).In case bidder is a subsidiary of a holding company, MAAT shall be that of subsidiary company only (i.e. excluding its holding company).

The bidder shall enclose audited annual turn over statement by Charted Accountant for the preceding Three years issued to the company (i.e, for FY 2019-20, 2020-21, 2021-22, 2022-23, 2023-24, 2024-25)

The Bidder must be registered under Indian Company Act/1956 Indian Factories Act/1948 any relevant Indian Laws, whichever is applicable. In support, Certificate of Incorporation, GST registration certificates with GSTIN number and ISO certificate shall be furnished