Providing and fixing of Open Gym and Swings in park behind Veterinary Hospital Ward No. 27, MC Jind. (Only for L/C societies)

Providing and fixing with all nessery items including prepration of foundation two seated Chair swing. Age Group- 6 to 12 Years. Safety Play Area - 10*8 ft, Chain= GI Rubber Coat Chain Belt, Padestal Bearing, Pipe = 60 mm, 14 Guage Apolo CR Pipe ISI Mark. Paint= To Coat Colour Aspa Paint. All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment, etc.

Supply and fixing of Straight Slide should be made of HDPE (Pipe) of ID 40 and OD 50 with nylon bush (mat finish) of demanded colour. With structural parts GI pipes and MS steel (including cutting, fitting, welding, bolting, and smooth grinding, etc. complete. All the structural parts shall be polyester powder coated, having min. thickness of 50 micron. High quality fastened complete with supply/fixing and installation to ground, including civil work for making base and pedestals. All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment, etc.

Providing and fixing of air swing emphasizes on the front and back upper leg muscles exercise. Size1400× 915× 1360mm: main post made of 4-inch pipe and other main pipes 1-1½ inch pipes. 3mm thickness pipes, double-coated PU painting, heavy-duty sealed ball bearing, for long-lasting life. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts, and when concrete is set, fixing the equipment onto it and cover nuts and bolts with base plate cover (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment, etc

Sky Machine-The main frame of sky machine is to be made in two parts: one from 80NB and 40NB galvanized pipe and vertical pipe with 80NB pipe structure. The handle pipe is to be of 25NB GI pipes with PVC/rubber grip on top end. This handle pipe is to be hinged over 80NB main frame with the help of suitably designed heavy-duty bearing assembly. Bearings used are to be oil-sealed and self-lubricating. Make of bearing shall be as per approved make list. The handle pipe is to be further extended to the rectangular tube of 50 x 50 mm on both sides with 40NB galvanized pipe links. Paired rectangular tubes with four foot rests has to be linked to main frame. Foot rest is to be made with the help of high-quality aluminium casting material. The total structure is to be supported on foundation stand which shall be of 80NB pipe. All pipes are to be uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe are to be closed by GI / PVC caps for user safety against entrapment. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts, and when concrete is set, fixing the equipment onto it and cover nuts and bolts with base plate cover (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment, etc

Pull Chair-Providing, designing and fixing of pull chair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded, with joints scalloped as necessary and dressed off, removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high-quality grip rubber at top end. Padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury, and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance-free, duly oiled sealed and self-lubricated, made by reputed company to be approved by the Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of  minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment onto it and cover nuts and bolts with base plate cover (Including concrete base of size 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment, etc.

Push Up And Dip Bar-Providing, designing and fixing of exercising bar in a pair of size 1802 x 612 x 1399 mm fabricated with main post of 140 mm dia and 3.00 mm thick and rest of the pipes 2.75 mm thick yellow sleeve is dia 159mm thickness 8.00 mm, parallel bar dia 42 mm  2.75mm, rest pipe is thickness 2.75mm, having bottom plate 260 mm dia with thickness 12.00 mm with ABS cap/ cover. All pipes made up of hot-rolled tubular steel and pre galvanized, having oil degreasing treatment and sand blasting de-rusting treatment must be used before powder coating treatment with baking temperature of more than 200 degree celsius using high quality paint nippon or equivalent of 80 - 120 micron thickness. All joints of pipe should be cut by CNC laser cutting and  robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. The equipment must confirm the quality standards such as DIN 79000 and EN 16630. The equipment must have TUV certification in the manufacturing process. The equipment shall be fixed on ground with concrete of  minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment onto it and cover nuts and bolts with base plate cover (Including concrete base of size 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment, etc.

Arm Wheel-Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high-quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance-free, duly oiled sealed and self-lubricated, made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts, and when concrete is set, fixing the equipment onto it and cover nuts and bolts with base plate cover (Including concrete base of size 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment, etc.