Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.5 LAccepted-AOC SPECIAL 1 INDUSTRIAL ESTATE NEW POWER HOUSE ROAD JODHPUR 342003 | JODHPUR | RAJASTHAN | 342003 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹33.8 L+₹1.3 L (4.15%)Rejected-Finance RZ 18 260 WEST SAGARPUR NEAR MCD SCHOOL NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹37.1 L+₹4.6 L (14.3%)Rejected-Finance WZ 831 NANGAL RAYA PANKHA ROAD NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹37.2 L+₹4.7 L (14.5%)Rejected-Finance 19 62 1ST FLOOR WEST MOTI BAGH SARAI ROHILLA NEW DELHI 110035 | NEW DELHI | NEW DELHI | DELHI | 110035 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹37.8 L+₹5.3 L (16.3%)Rejected-Finance RZ A2 2 CHANAKYA PLACE PART I OPP C 1A BLOCK JANAK PURI NEW DELHI 110059 | NEW DELHI | WEST DELHI | DELHI | 110059 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹38.6 L
EMD Value
₹77,160
Closing Date
20 Apr 2024, 6:00 pmClosed
GE UTILITY PLANT AND MACHINERY DELHI CANTT-10
GE UTILITY PLANT AND MACHINERY KIRBY PLACE DELHI CANTT-10
SPECIAL REPAIR FOR REPLACEMENT OF BER SUMMER APPLIANCES CENTRALISED AC PLANT AT 1 WEC UNDER GE(U) PM DELHI CANTT10.
2024_MES_648665_1
GE(U)/PM/D-70/2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
120 days
Delhi cantt-10
MES contractor enlisted under class D cat c(i) having deposited standing security of Rs 100000 with department. Contractor not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class a
7 documents required · 7 mandatory
₹500
GE UTILITY PLANT AND MACHINERY DELHI CANTT-10
₹77,160
Yes
11 Jul 2024
30 Mar 2024
22 Apr 2024
30 Mar 2024
20 Apr 2024
13 Apr 2024
Amount
Supply, Installation, testing and commissioning of VRF type AC units, Outdoor type, capacity 12 HP, air cooled, 100% inverter compressor based VRF system using R410 refrigerant Gas, including first fill of refrigerant. The system shall be suitable for cooling and heating both purposes and shall work on 3-phase , 415V, 50Hz AC power supply. Twin scroll compressors with accumulator, air cooled condensers made with corrosion proof Hydrophilic blue fins and its fan with motors, microprocessor controls, control panel along with internal control and power wiring, internal interconnected refrigerant pipes, charging ports with precharged non CFC gas of Eco Friendly Refrigerant ( R 410A) as per OEM recommendations. The unit shall be heating-cooling both type and no duration up to 43° C and non stop cooling up to 56 °C.Quoted rates complete all as specified and directed. (Make :- Bluestar/ Daikin/ Hitachi) Note :- 1. The bidder is required to submit certificate from the OEM duly signed by GM Level Officer and stamped for back to back support (along with Technical bid, failing in submission of Certificate will led to rejection of the Bid). 2. All VRF Installation work to be execute by OEM or OEM Authorised Vendor Only. 3. PCC and block Mesonry work for grouting of outdoor unit shall be included in quoated rates complete all as specified and directed.
Supply, Installation, testing and commissioning of VRF type AC units, Outdoor type, capacity 22 HP, air cooled, 100% inverter compressor based VRF system using R410 refrigerant Gas, including first fill of refrigerant. The system shall be suitable for cooling and heating both purposes and shall work on 3-phase , 415V, 50Hz AC power supply. Twin scroll compressors with accumulator, air cooled condensers made with corrosion proof Hydrophilic blue fins and its fan with motors, microprocessor controls, control panel along with internal control and power wiring, internal interconnected refrigerant pipes, charging ports with precharged non CFC gas of Eco Friendly Refrigerant ( R 410A) as per OEM recommendations. The unit shall be heating-cooling both type and no duration up to 43° C and non stop cooling up to 56 °C.Quoted rates complete all as specified and directed. (Make :- Bluestar/ Daikin/ Hitachi) Note :- 1. The bidder is required to submit certificate from the OEM duly signed by GM Level Officer and stamped for back to back support (along with Technical bid, failing in submission of Certificate will led to rejection of the Bid). 2. All VRF Installation work to be execute by OEM or OEM Authorised Vendor Only. 3. PCC and block Mesonry work for grouting of outdoor unit shall be included in quoated rates complete all as specified and directed.
Supply, Installation, testing and commissioning of VRF type AC units, Outdoor type, capacity 28 HP, air cooled, 100% inverter compressor based VRF system using R410 refrigerant Gas, including first fill of refrigerant. The system shall be suitable for cooling and heating both purposes and shall work on 3-phase , 415V, 50Hz AC power supply. Twin scroll compressors with accumulator, air cooled condensers made with corrosion proof Hydrophilic blue fins and its fan with motors, microprocessor controls, control panel along with internal control and power wiring, internal interconnected refrigerant pipes, charging ports with precharged non CFC gas of Eco Friendly Refrigerant ( R 410A) as per OEM recommendations. The unit shall be heating-cooling both type and no duration up to 43° C and non stop cooling up to 56 °C.Quoted rates complete all as specified and directed. (Make :- Bluestar/ Daikin/ Hitachi) Note :- 1. The bidder is required to submit certificate from the OEM duly signed by GM Level Officer and stamped for back to back support (along with Technical bid, failing in submission of Certificate will led to rejection of the Bid). 2. All VRF Installation work to be execute by OEM or OEM Authorised Vendor Only. 3. PCC and block Mesonry work for grouting of outdoor unit shall be included in quoated rates complete all as specified and directed.
Supply installation,testing and commissioning of Hiwall Units with evaporator coil,fan and Fan motor , cord less remote control , and necessary accessories etc suitable for operation on 230 V + 10% 50 Hz single phase AC supply complete as required . The units shall be of following capacities :-
Capacity 2.0TR (Make :- Bluestar/ Daikin/ Hitachi)
Capacity 2.5TR (Make :- Bluestar/ Daikin/ Hitachi)
Capacity 2.8TR (Make :- Bluestar/ Daikin/ Hitachi)
Supply of Cordless Remote Control
Supply and fixing refrigerant Y-Joint for Combining Outdoor and Indoor Units required for distribution of refrigerant in copper piping as per final approved drawing which will be submitted by contractor from OEM.
Supply, installation, testing and commissioning high pressure interconnecting refrigerant pipe of following sizes including civil work like wall opening for copper and drain pipe for VRF system with (19mm/13mm thick) closed cell elastomeric nitrile rubber tubular insulation between indoor & outdoor units as per specifications. All Piping intall on cable trays with cover for outdoor locations as per OEM recommendations and PVC sleeves shall be provided wherever pipe is crossing the wall. Food grade nitrogen shall be used while making brazing joints complete all as specified and directed. Make of Copper pipe :- Diamond/ Star/ Mandev Make of insulation :- KAIFLEX/ KFLEX/ VIDOFLEX/ PARAMOUNT
9.5 mm with 13 mm thick insulation
12.7 mm with 13 mm thick insulation
15.9 mm with 13 mm thick insulation
19.1 mm with 13 mm thick insulation
22.2 mm with 19 mm thick insulation
28.6 mm with 19mm thick insulation
34.9 mm with 19 mm thick insulation
Supply and fixing Rigid PVC piping complete with fittings, supports and duly covered with 9 mm thick closed cell nitril rubber insulation complete all as specified and directed. (Make:- Prayag/ Supreme/ Prince/ Polytuff) Note :- Providing and fixing in position the following size of PVC (UPVC quality) pipes, cut in required lengths and joined with PVC cement and also providing and fixing in position the necessary "U" trap elbows, tees, and reducer and all types of fittings. Cost to include all necessary as required. Necessary Wall cutting and making the wall good and its cost should be included. The pipe to be insulated by 9mm thick nitrile rubber thermal insulation of class 0 category.
25mm dia pipe (NB)
32mm dia pipe (NB)
Supply, fixing of MS Outdoor Stand as per OEM Recommendation
Supply and fixing of 125mm deep Antivibration Flexible Joints made out of imported fire retardant fabric with extruded aluminium frame/ flange on both sides for Outdoor Units & AHU.
Supply and charging Additional refrigerant gas of R 410A complete all as specified and directed. (Make :- Mefron/ Floron/ Refron)
Supply and installation, testing, commissioning Outdoor type feeder piller Box made out of 3.15 mm thick CRCA sheet , 415 Volt, 3 phase , 50 HZ supply factory made & MS angle section 40 x40x 5mm frame with front and back openable double door with provision of locking arrangement dust & varmin proof , gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete all as specifed abd directed & Connisting of the following equipments:- (i) MCCB, 4 pole , 25 KA , 160 Amps adjustable to thermal Magnetic Release -01 No ( Incomming) (ii) MCCB , 4 pole ,16 KA, 63 Amps -03 No (Out going) (III) Indication Lamp 22.5 mm dia LED type 240Volts AC to show three phase availability- 01 set (MAKE for MCCB :- L & T/Legrand / ABB / Havells) (v) Solid aluminium bus bar 400 Amp for 3 phase , 200 Amp for neutral (vi) PCC and block Masonry work for grouting of panel complete all as specified and directed. (Make of LT Panel :- Universal Switchgear/ Dvepl/ PSC/ GM& G/ ITE Gurgaon/ Neptune/ Hensel/ Indo Asain/ Standard/ Havells/ C&S/ Electric/ Bhandari/ Shalabh/ Adhunik Switchgear/ HPL/ Seepl/ ABB/ L&T/ Siemens)
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including provision of 40 mm GI Tubing, light grade and watering pipe shall be 20 mm bore GI light grade including excavation & earth work, PCC pit with CI cover, Charcol, salt, funnel, wire mesh, GI strip Up to 7.5 mtrs length complete all as specified and directed.
Material & Labour for Earth continuity conductor fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32 x 6 mm dia galvanised iron strip
Material & Labour for control wiring with 4 core X 16sqmm , FRLS PVC round insulated and sheathed wire featuring a bright annealed bare copper conductor cable 1100 Volts grade with multi stranded, wire colour black, drawn through concealed conduit including PVC rigid conduit medium grade 50 mm dia as per IS 694 with on Cable Traycomplete complete all as specified and directed . (Make of Cable :- Finolex/ Havells/ Polycab) Make of PVC Conduit :- KALINGA/ PLAZA/ KAMPLAST (Note :- Four run of wire with PVC conduit will be considered as one Length.)
Material & Labour for control wiring with 4 core X 06 sqmm , FRLS PVC round insulated and sheathed wire featuring a bright annealed bare copper conductor cable 1100 Volts grade with multi stranded, wire colour black, drawn through concealed conduit including PVC rigid conduit medium grade 50 mm dia as per IS 694 with on Cable Traycomplete complete all as specified and directed . (Make of Cable :- Finolex/ Havells/ Polycab) Make of PVC Conduit :- KALINGA/ PLAZA/ KAMPLAST (Note :- Four run of wire with PVC conduit will be considered as one Length.)
Material & Labour for control wiring with 3 core X 1.5 sqmm , FRLS PVC round insulated and sheathed wire featuring a bright annealed bare copper conductor cable 1100 Volts grade with multi stranded, wire colour black, drawn through concealed conduit including PVC rigid conduit medium grade 32 mm dia as per IS 694 complete all as specified and directed (Make of Cable :- Finolex/ Havells/ Polycab) Make of PVC Conduit :- KALINGA/ PLAZA/ KAMPLAST (Note :- Two run of wire with PVC conduit will be considered as one Length.)
Material & Labour for control wiring with 2 core X 0.75 sqmm sqmm , Sheilded wire, twisted pair & Sheilded 2 Core Sheathed Wire, Sheilding use for Earthing Connection, drawn through concealed conduit including PVC rigid conduit medium grade 32 mm dia as per IS 694 complete all as specified and directed, (Make of Cable :- Finolex/ Havells/ Polycab) Make of PVC Conduit :- KALINGA/ PLAZA/ KAMPLAST
Supply, Laying, jointing and testing of electric cable XLPE 3.5 Core 50 sqmm insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed . (Make :- Finolex/ Havells/ Polycab)
Supply and fixing in repair MCB SP, 240 Volts, 10 Amps with MCB Metal enclose complete all as specified and directed. (Make :- L & T/ Legrand / ABB / Havells)
Supply, Fixing & fabricate of Frame work on which Hiwall unit is to be installed. Framework is of Metal Rectangular Tube (25mm x 10mm) & 2.5mm Thick duly Paint on it with first Coat of Primer complete all as specified and directed.
Supply, Installation, testing and commissioning of water cooler fully stainless steel body (Top lid ,front top/bottom, rear top/bottom, dip tray, side panel etc) and chiller tank(SS-304 food grade minimum 0.80mm thickness of stainless steel sheet) ,Chiller tank with PUF insulation( thickness not less than 0.6mm), including float ball valve of make prayag/ of suitable sizes as per manufacturer's design & specification with Non CFC Refrigerant (R-134a) ,energy efficient reciprocating compressor of make Emerson/Tecumseh , suitable for operation on single phase 230V, 50 Hz, AC supply, having storage capacity of 80 liters and nominal cooling capacity of 40 liters per hour , insulated top cover and fitted with hinges, gasket on all four sides, lock and key arrangement, full width single sheet moulded drain tray , Brass (CR plated) push type double faucet , motor and condenser standing base made by stainless steel of minimum thickness 1.0mm , minimum thickness of copper tube of condenser not less than 0.50mm, and minimum one year replacement warranty (Machine & Compressor) complete all as specified and directed. (Make :- Model No. SR 40/80 of Sidwal / Model No. SRA 4080G of USHA or equivalent model of BLUE STAR)
Supply, Installation, testing and commissioning of BEE 4 star rated frost free refrigerator double door, electric driven (single phase, 230V, 50 Hz, AC supply) of capacity not less than 308 Ltrs capacity with non CFC refrigerant inverter based compressor complete all as specified and directed (Make :- Latest Model of LG/ SAMSUNG/ Whirlpool)
Supply, installation testing and commissioning Desert Cooler powder coated body of size 25 inch x 25 inch x 36 inch (height) with side panels (03 Nos) fabricated out of 20 SWG PGI Sheet alongwith distribution switch, 5 Amp piano switch and tank of depth 11 inch, electric driven (single phase), 230V, 50 Hz, AC, fitted with submersible pump of suitable capacity, rotary switch (Step type Speed Regulator), three core flexible copper conductor wire with 5 Amp Plug Top, wood wool pad on three sides and three speed Exhaust motor of copper wounded, 450 mm sweep complete all as specified and directed . (Make of Pump & Motor :- Crompton Cat ref 500MMCKM-MARKI or equivalent of Khaitan/ Indcool.)
P S TRADERS
Tushar engineers
SNOWY ENGINEERING INC
RUCHIKA ENGG.WORKS
Flint India
Leo Network power systems
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .