OT-22

Amount

Removal of existing MS window for store room as directed by the Engineer incharge including removal of frames, hinges and fastenings and devoluting the retrieved materials to 400KV SS K.R.Thoppur stores including labour charges, lead, lift, T&P, etc., complete.

Providing and fixing of fully glazed country wood cup board of required size as directed by the Engineer in charge using factory made CW frame (75x32mm) and CW fully glazed shutters and using 12mm thick particle board laminated on both sides of ISI stamped including cost of all materials labour charges, fixing charges, required fixtures and fittings to the cupboard such as Mortice Lock - (Godrej or equivalent) with required screws with 3 Keys, butt hinges, aluminium tower bolt inner hooks etc., lead, lift and 2 coats of solignum for portions and wood work in contact with masonry lead, lift, etc., complete.

Providing RCC 1:1.5:3 mix for precast slab using 12mm to 20mm graded HBG metal as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, curing, all T&P, lead, lift etc., complete but excluding cost of steel reinforcement.

Providing steel reinforcement of High Strength deformed TMT bars having charactoreristic strength of 500 N/mm2 of 'SAIL' or 'TATA' make or equivalent for all RCC works including cutting, bending, binding, tying and placing in position as directed by the Engineer in charge including cost of steel, 18guage GI binding wire, lead, lift, T&Ps, etc., complete.

Brick work in CM 1:4 using Fly ash Bricks of size 23x11x7cm with minimum compressive strength of 75kg/cm² for cupboard work as directed by the Engineer in charge including cost of all materials, abour charges, curing, lead, lift, T&P, etc., complete.

Plastering in CM 1:5, 12mm thick for cupboard walls including cost of all materials, labour charges, curing, lead, lift, T&P etc., complete.

Supplying, fabrication and fixing of structural steel door single leaf (folding type) using MS Channels 75x40x5mm for door outer frame MS angle 25x25x5mm for shutter frame and MS sheet 18g for shutter with necessary bracings using MS flat 20x5mm, including cost of all materials, locking arrangements such as aldrops 250mm long, 12mm dia, tower bolts 250mm long 12mm dia, hinges 125mm x 30mm, Handles 200mm long, labour, welding charges as approved and as directed by Engineer at site, lead, lift, etc., complete.

Painting to the wood work with two coats of approved quality colour Satin / Matt enamel paint over one coat of approved wood primer including cost of all materials, brushes, lead, lift, etc., complete.

Colour washing with two coats of Oil Bound distemper over a coat of water based primer for interior surfaces as directed by the Engineer in charge including cost of all materials, scaffolding, labour, lead, lift, etc., complete.

Painting the structural steel framing with two coats of approved quality & colour of enamel paint over a coat of red oxide including cost of all materials, brushes, labour charges, lead, lift, etc., complete.

Supplying and fixing in position Colour Glazed Model Floor Mounted European Water Closet of size 460x380mm of best quality and approved make with 100mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flpped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complee with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by mleans of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as 15mmbras connections, 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc, complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting including cost of all materials, labour charges, lead, lift, curing etc., complete complying with standard specifications.

NVS and Co