CERTAIN REPAIRS REPLACEMENT TO ROOF SHEETS FALSE CEILING WALL PLASTER AND MISC WORKS AT MES INSTLNS AT DALHOUSIE AND BAKLOH CANTT

Amount

Demolition of cement concrete (unreinforced) of any description not other specifically provided for etc and removal of debris to a distance not exc 50 mts and depositing where directed at a level n exc. 1.5 m above the starting point.

Demolition of wall and ceiling boards any thickness of any description including cover fillets complete all as specified and directed.

Dismantling timber scantling 40sqcm and over in section in any position in framed work all as specified.

M&L for second class hardwood in scantlings in framed work and fixed clean sawn etc all as specified.

M&L cover fillets of hard board,40mm wide and fixing with screw 6mm thick etc

M&L preparation of new wood and wood based surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of old painted wood or wooden based surfaces by rubbing with abrasive paper etc of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of primer (pink primer), complete all as specified.

4mm thick Non asbestos fibre cement building boards of any size fixed or laid/inserted to timber/GI/Aluminium framework with screws and providing two coats of white wash including preparation of surfaces complete all as specified.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

S & F in Repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., as directed.

Restraining & resecuring existing barbed wire of any type incl making good staples etc any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc (each line wire to be measured) complete all as specified.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer n.exc 25 cm, watering, and removing surplus soil to a distance n.exc 50 mtr and making good surfaces in soft/loose soil.

M & L cement concrete type C-2 1:3:6 (Using 40mm graded stone aggt) in foundation filling and mass concrete.

Mild steel work as post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc; and similar works conforming to Fe-290 Gde E-165 complete all as specified.

M&L Preparation of new/old steel surfacesurfaces of any description, otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (Ordinary tint) over a coat of pink primer.

Dismantling of fencing wire mesh any type

Supply only Chain link fencing 3.8 mm mm dia galvanized PVC coating wire (50x50) mm mesh made upto matress lapped wire and laid on position / fixed on poles complete.

Fixing only chain link fencing including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including naintal or similar pattern roof coverings.

M & L for 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L- type or J- type or cranked hook bolts and washers, in roofs, walls etc. with grade of zinc coating 275.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles.

Brick work with sub class "B" bricks straight or curved on plan exceeding 6 metre mean radius in cement mortar 1:6, all as specified .

M & L for 75 mm thick plain cement concrete 1:3:6, type C2, using 20 mm graded stone aggregate) as in plinth protection, path etc laid in alternate bays not exc 3 m in length, and finishing the surface even and fair without using extra cement all as specified and directed.

M & L for 75 mm thick PCC 1:4:8, type D2 as in subbase using 40 mm graded aggregate .

M & L for 40 mm thick plain cement concrete 1:2:4. type B-1 (20mm graded aggregate) as in floor including finishing top even & smooth without using extra cement.

Taking down cement plaster of any description on brick walls/ ceiling etc including racking out joints, hacking for key, scrubbing down with water complete.

M & L for 15 mm thick rendering in CM 1:6 on brick work or concrete/ stone surfaces including finishing plaster surface even and smooth without using extra cement all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4 on brick or concrete/ Stone surface including finishing plaster surface even and smooth without using extra cement all as specified and directed.

Preparation of newly plastered surface of walls and applying three coats of white wash complete all as directed.

Preparation of newly plastered wall surface and applying two coats of cement base paint complete all as directed.

Preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of alkali resistant & primer complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L for 40 mm thick plain cement concrete 1:2:4. type B-1 (20mm graded aggregate) as in floor including finishing top even & smooth without using extra cement.

M & L for non - skid coloured ceramic tiles 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors and including 15mm thick screed bed or bedding layer of CM (1:6) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M & L Coloured glazed ceramic tiles of size 300 x 200 x 7/450/350/7 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match,and including 15mm thick screed bed or bedding layer of CM (1:4) complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry incl 15mm scrred bed in floors etc all as specified

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade (with grey cement and pigment) complete all as specified and directed

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks, or stainless steel wire staples including etc complete all as specified and

Hacking out old broken glass (any thickness) and size from metal frame glazed with putty or fixed with wooden beads and removal of debris to a distance n.exc 100 mtr and depositing where directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as directed.

Havish Construction

malghotra construction co

M/s Joginder Paul Bhatia

M/S Ajay Kumar Mahajan

m/S Varun Gupta

M/s Shakti Electric Works

KEWAL SONS