SPECIAL REPAIR TO BUILDING No T-283 AND CERTAIN REVENUE WORK AT VAIRENGTE MIL STN UNDER GE SILCHAR

Amount

PART-I (B/R WORKS) Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge or any thickness in roof covering /wall cladding complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm each complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling of timber fillets rails, posts, rafters, purlins etc under 40 Sqcm in section, in any position in unframed work complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position, unframed work, etc complete all as specified and directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified & directed

Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified & directed.

Excavation over areas, n exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits manholes, pier holes and getting out in soft/loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft / loose soil , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Returning filling in incl watering, ramming in layers n.exc. 25cm thick in soil complete all as specified and directed.

Removing excavated surplus soil to a distance n.exc. 50m and depositing where directed at level n.exc. 1.50m above the starting point complete all as specified and directed.

M&L for Loose filling with aggregates of gauge 40 to 80 mm in back fill of weep holes using broken stone aggregates complete all as specified and directed.

M&L for Hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified & directed.

Material and labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete Design mix (M-25) using 20 mm graded aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete Design mix (M-25) using 20 mm graded aggregate as in columns,pillars, piers etc, complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.50 mtr span complete all as specified and directed.

M&L RCC (Nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate as in cill , band and other similar items, complete all as specified and directed.

Material and labour for Formwork to sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete complete all as specified and directed.

Material and Labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete complete all as specified and directed.

Material and Labour for Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed.

Material and labour for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but not exc. 20 cm wide for rough finished flat surface of concrete, complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secruing with clips complete all as specified and directed.

All as per Item No 29 but 6mm to 8mm dia. Complete all as specified & directed.

All as per Item No 29 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified & directed.

Material and labour brick work with sub class ‘B’ brick straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for half brick work with sub class ‘B’ brick straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for Anodised aluminium snap grid frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long as specified incl. 4 mm thick Non- asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and directed.

M & L for Mild steel sheet eaves gutters, galvanised class 3 made out of 1 mm thick sheet half round, 200mm dia, with rounded edge complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregates) as in subbase of floor complete all as specified & directed.

M & L for Providing, plain cement concrete in PCC 1:2:4 type B-1 using 12.5 mm graded stone aggregatesin as in benching / haunching to manholes rounded or chamfered complete all as specified & directed.

M & L for Providing precast plain cement concrete in PCC 1:2:4 type B-1 using 12.5 mm graded stone aggregatesin as in landings, cover slabs (for man holes etc.) set in CM 1:6 incl formwork complete all as specified & directed.

Material and labour for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone as in floor , Finishing cement concrete surface even and smooth without using cement extra cement complete all as specified and directed.

M&L for , cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

M&L rendering 15 mm thick cement rendering in two layer each of 10+5 mm thick on fair faces of brick wall or concrete surfaces in CM 1:4 & water proofing compound mixed with second layer @ 3% finished even and fair complete all as specified & directed. Note -WPC shall be measured and paid separetly.

M&L rendering 15 mm thick cement rendering on fair faces of brick wall or concrete surfaces in CM 1:6 finished even and smooth without using extra cement, complete all as specified & directed.

M&L rendering 15 mm thick cement rendering on fair faces of brick wall or concrete surfaces in CM 1:4 finished even and smooth without using extra cement, complete all as specified & directed.

Supply & fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Supply only WPC complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in panels and joints filled with bituminous mastic filling with 1 part of bitumen and 3 part of sand complete all as specified and directed.

S&F Rolled Mild Steel Fe 410 -W (Gde- E- 250) quality- A in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings also fastening and fixing complete all as specified and directed.

M & L for mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, clamps, holdfasts, wall ties, hooks for holding fans and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F Mild steel screw bolts 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm but n exc 30 cm long complete all as specified and directed.

M&L for Plates (plain or chequered) Fe 410 -W (Gde E- 250) quality A channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

Supply and fix Steel work in tubular /Square trusses including special shaped washer etc. complete using ERW or induction butt welded tubes using steelconforming to I. S.1161- 2014/ Is 4923-1997 grade St.-210 complete all as specified and directed.

S&F Non Skid ceramic tiles colour 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 including brushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

Material and labour Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm and not exceeding 0.36 sqm, in skirting / dado set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layer of cement mortar 1:6 over brushing with neat cement slurry with 3.00 Kg of cement per sqm incl roughening of surfaces complete all as specified & directed

M&L for coloured glazed ceramic tiles (300mmx200mm) 6mm to 7mm thick on vertical surface such as skirting, dados, risers etc. set and jointed in neat cement slurry and pointed in coloured cement or pigment to match colour tiles over & incl 10 mm thick screed layer in CM 1:4 complete all as specified and directed.

M & L for Concrete bed in PCC 1:3:6 type C-2 using 40 mm graded stone aggregates to 110 mm bore drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified & directed.

M&L Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in bed blocks, coping, lintels upto 1.5m clear span, cills, lin steps, kneelers, bed plates, apex stones kerbs benching , levelling course and similar work including necessary form work complete all as specified and directed.

M&L Plain cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in bed blocks, holdfast blocks, coping, lintels upto 1.5m clear span, cills, lin steps, kneelers, bed plates, apex stones kerbs benching , levelling course and similar work including necessary form work complete all as specified and directed.

Supply and fix Framed work such as grills, gratings, etc. with ends of bars or forged into spikes, framed guard bars, barred iron doors; ladders; framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe 290 Gde E-165, complete all as specified and directed.

Supply and fix PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified & directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified & directed.

Supply and fix 2 ways sliding Anodised aluminium glazed ventilator shutter with frame with the following specification (a) ventilator frame 2 track of size 60mm x 25mm x 1.5mm Thick (b) Stiles and rails of size 35mm x25mm x1.5mm (c) PVC gasket with 4mm thick tinted glass, incl aluminium handles with necessary locking arrangement for 02 Nos glazed shutter (d) 35 x35 x 1.5 mm thick T section mullion. Note :- Measurement to be taken as overall width and height of window. No shutter or frame to be measured separately. All necessary accessories including tinted glass and stainless steel wire cloth required for assembling and fixing window at proper place complete are deemed to be inclusive.

Supply and fix 3 ways sliding Anodised aluminium glazed ventilator shutter with frame with the following specification (a) ventilator frame 3 track of size 95mm x 25mm x 1.5mm Thick (b) Stiles and rails of size 35mm x25mm x1.5mm (c) PVC gasket with 4mm thick tinted glass, incl aluminium handles with necessary locking arrangement for 02 Nos glazed shutter (d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples including aluminium handles with necessary lockinng arrangement for 01 No gauzed shutter. Note :- Measurement to be taken as overall width and height of window. No shutter or frame to be measured separately. All necessary accessories including tinted glass and stainless steel wire cloth required for assembling and fixing window at proper place complete are deemed to be inclusive.

M&L for 12mm thick particle board, exterior grade. Prelaminated on both sides with decorative choice lamination, complete all as specified and directed.

S&F powder coating aluminium frame for doors, windows, ventilators with one or more rebates inlcuding joining clat for fixing etc., complete all as specified and directed.

S&F powder coating aluminium door shutters, aluminium section weighing 0.565kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , hanldes 2 Nos in each door, hinges, anodised aluminium snap beading screws etc., complete all as specified and directed.

S&F mortice lock, verticla type of size 100mm of brass, 04 Lever, complete all as specified and directed.

Supply and fix 100mm mild steel butt hinges fixed with stainless screws complete all as specified and directed.

Supply and fix 100mm stainless steel butt hinges fixed with stainless screws complete all as specified and directed.

Supply and fix 150 mm long aluminium handle cast type anodised complete all as specified & directed.

Supply and fix 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified & directed.

S&F 150 mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, with rubber bush fixed in door complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fix Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Supply and fix Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Wire netting of stainless steel wire 1.4mm dia Size of mesh in 25 mm fixed with tinned tacks of stainless steel wire staples complete all as specified and directed.

M&L for 4.8 mm thick, plain Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed in repairs, complete all as specified and directed.

Supply and fix, white vitreous china wash basin of size 550 mm x 400 mm, flat back white including brackets ,cutting for and pinning in ends of brackets complete all as specified & directed.

Supply and fix, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor complete all as specified and directed.

Taking up and down steel tubing 15mm bore and connections complete all as specified.

Taking up and down steel tubing 20mm bore and connections complete all as specified.

Supply, lay and fix 15mm bore galvanised iron water tube medium grade with all fitting and fixed to wall, ceiling or laid in floor and trench complete all as specified and directed.

Supply, lay and fix 20mm bore galvanised iron water tube medium grade with all fitting and fixed to wall, ceiling or laid in floor and trench complete all as specified and directed.

Supply and fix,15 mm bore bib tap fancy type, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule fixed in repairs complete all as specified and directed.

Supply and fix 15 mm bore pillar tap fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

Supply and fix, stop valve fancy type, cast copper alloy,chromium plated ,screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions fixed in repairs complete all as specified and directed.

Supply and fix, angle valve fancy type, cast copper alloy,chromium plated ,screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions fixed in repairs complete all as specified and directed.

S&F in repair MS Chromium plated tubular curtain rods 20mm dia with side end cap fancy type & brackets as in repairs complete all as specified and directed.

Supply and fix stainless steel grating 150 mm dia complete all as specified and directed.

Supply and fix 40 mm bore waste fitting brass CP gfor sink with long screwed shanks & fly nut flkange embedded in CM & other end fixed complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply & fix PVC waste pipe 32 mm bore for WHB complete all as specified and directed.

Supply & fix 32 mm size PVC Waste coupling of PTMT (half or full threaded) (Minimum weight 45gms ) complete all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fix Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

Supply and fix as in repairs vitreous china wash down water closet pan (pedestal pattern), white incl plastic water closet seat cover , black/ white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device ( excluding flushing cistern & flush pipe)complete all as specified and directed.

Supply and fix in repairs PVC valveless, syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting and flush pipe complete all as specified and directed.

Supply and fix, Plastic water closet seat cover , black/ white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device in repairs complete all as specified.

Demolition and breaking up AC/CI/PVC drain pipes 50to 110mm set in cement mortar complete all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,fixed to wall, complete all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,laid in trenches or floor complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed.

Material and labour PVC (SWR) floor trap, 75mm dia outlet, plain with chromium plated grating including jointing with solvent cement complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

Supply and fix 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

Supply and fix Soap dish, Chromium plated fixed with CP brass screws complete all as specified & directed.

S & F Chromium plated health faucet with 1.2 mtr long easy flex tube for fixing with 15mm pipe alongwith wall hook complete all as specified and directed.

S & F Towel Ring PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats as in repairs complete all as specified and directed.

Supply and fix Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified & directed.

Material and Labour for applying 1mm thick wall care putty on wall complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed

Material and labour for preparation of newly plastered or un plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of alkali resistant primer complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

PART-II (E/M WORKS) Taking down carefully copper/aluminum existing point wiring (light/fan/socket or power points) complete incl wooden battens/casing capping or conduit etc (without disturbing existing fittings point wiring etc) and all connected fittings such as switch, socket, ceiling rose, lamp holder, brackets ceiling fittings, bulk head fittings and fan regulator etc and making good to disturbed surfaces of wall floor etc complete all as specified and directed.

Dismantling of old unserviceable main switches DBs, MCB enclosures, electric meter, PVC rectangular blocks etc and keeping in safe custody either for reuse or for disposal Including making good to the disturbed surface of wall complete all as specified and directed.

M&L for Point wiring using FRLSH PVC insulated unsheathed multi strand 1100 volts copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one light/fan/bell point with proper colour coding complete all as specified and directed.

All as per item No.121 above but for 5 Amps socket Point (Same board), complete all as specified and directed

All as per item No. 121 above but for 5 Amps socket Point (Independent board), complete all as specified and directed

All as per item No. 121 above above but for one 15 Amps socket point control by one switch on independent board with 2.5 Sqmm size PVC insulated unsheathed multi-stranded copper conductor cable with 2.5 sqmm PVC insulated unsheathed single core copper conductor earth wire complete all as specified and directed.

Supply and fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified & directed.

S&F switch piano flush type 5 Amp one way complete all as specified and directed.

Supply and fix switch socket combination 2 in 1, 5 Amp flush type complete all as specified and directed.

Supply and fix socket outlet 3/5 pin 5 Amps flush type complete all as specified and directed.

Supply and fix socket outlet 3 pin 5 Amps and 5/6 pin 15 Amps flush type complete all as specified and directed.

Supply and fix Bell Push flush type 5 Amps complete all as specified and directed.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Supply and fix switch socket combination 2 in 1, 5/15 Amp flush type complete all as specified and directed.

S & F Angular Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings with 10 watt B22 CDL 3 star LED lamp complete all as specified and directed.

Supply and fix ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts AC supply complete all as specified and directed.

S&F LED linear light fittings 20 Watt basic all purpose surface and wall mounted and LED batten with polycarbonate housing and intrigated electronic driver and connecting with 3 core flexible copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed. Make:- Crompton Greaves Cat No. CCS-100-20-65-HL2-DP-NWH or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/ Havells

S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with LED complete all as specfied and directed. Make : Havells Cat Part No. HEXAFIT10WLED857SSYMBOPC or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton

Supply and fix street /bldg security light LED luminaire 25 watt IP 66 LED lamp, driver etc, including wall bracket 1.5 mtr long made out of 40 mm bore GI light grade pipe with suitable siz of clamps nuts bolts & all accessories & making connection with FRLS PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde complete all as specified and directed. Make: Crompton Cat No. LSTS-25-CDL/NL-M or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Havells

Supply and fix LED NEO panel light size 2 x 2 recess mounted 42 Watt environmental friendly, new generation, aestheticlayy designed, ultra modern, recess mounting luminaire with high brightness SMD LED as light source, suitbale for Armstrong, Grid ceiling, complete all as specfied and directed. Make : Havells Cat Part No. PLUTONEO2X2PLR42WLED840S or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton Greaves

Supply and fix aesthetically designed linear mirro light, provided with a high output PMMA diffuser for glare free light, complete all as specified and directed. Make: Crompton Cat part No. LCL-07-CDL or equivalent equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Havells.

Supply and fix plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make :-Crompton Cat Part No BRISK AIR NEO or equivalent in Havells / Bajaj / Orient

M&L for fan hook fabricated with MS flat 25x6mm 300 mm long 02 nos bend to shape drilled with holes and MS nuts ,bolts and washers of required side with one coat of primer and two coats of synthetic enamel paints complete all as specified and directed

Supply and fix BLDC 5 star rating ceiling fan, AC single phase, 240 V of size 1200 mm sweep including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make :-Crompton Cat Part No ENERGION Charge or equivalent in Havells / Bajaj / Orient

Supply and fix Air ventilating fan having PVC body of size 250mm sweep complete with louvers shutters and rating 230 Volts, Single phase, 50 Hz, incl 1.0sqmm flexible copper cable PVC insulated sheathed not more than 0.30m in length, complete all as specified and as directed. Make :-Crompton Cat Part No BRIKS AIR NEO or equivalent in Havells / Bajaj / Orient

Taking down carefully sub main wiring including all accessories without disturbing existing wiring fittings fixtures etc and amking good to the disturbed surfaces , complete all as specified and directed.

M & L for circuit /submain wiring along with earth wire 2 x 6 Sqmm PVC FRLSH insulated unsheathed cable multi-strand copper conductor including 1 x 6 Sqmm PVC insulated unsheathed multi strand copper conductor earth wire through and including PVC casing capping of suitable size with all fitting and fixture accessories, connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing incl taking down old unserviceable submain wiring complete all as specified and directed. Note: Two run of single core cable and one run of earth wire will be mearsured as one length

Supply and fix sheet metal enclosure powder coated TPN DB for fixing of MCBs, 8 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces including taking out of existing unserviceable DB complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated SPN DB for fixing of MCBs, 8 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces including taking out of existing unserviceable DB complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated SPN DB for fixing of MCBs, 4 ways single door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces including taking out of existing unserviceable DB complete all as specified and directed.

Supply and fix MCB SP of capacity 6-32 Amps, 240v, 10KA 'C' curve, complete all as specified & directed.

Supply and fix MCB SPN of capacity 40 Amps, 240v, 10KA 'C' curve, complete all as specified & directed.

Supply and fix MCB TPN of capacity 63Amps, 240v, 10KA 'C' curve, complete all as specified & directed.

Material and labour for laying of bricks locally available sub-class 'B' brick (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the directon of cable complete all as specified and directed.

Supply and spread sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. Note : Thickness of sand cushion after punning down will be measured and paid.

Supply, fixing, commioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 25 Sqmm 3.5 core laid in trenches/fixed to wall/under road/pipe etc with and including copper cable glands & copper thimbles complete all as specified and directed.

Supply, fixing, commioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 16 Sqmm 2 core laid in trenches/fixed to wall/under road/pipe etc with and including copper cable glands & copper thimbles complete all as specified and directed.

Supply and laying 40 mm bore galvanised iron tubing, light grade with all fittings for passing of cables along pole with suitabble size of clamps , under road including cutting of road & making good with PCC 1:2:4 type B-2 as directed complete all as specified

S&F four pole change over switch with SS enclosure of 63 Amps capacity incl lugs, cable gland etc , complete all as specified and directed.

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to earth wire 4 mm dia GI wire with mild steel nuts bolts checknuts & washers and connected to equipment as directed incl funnel with Gi medium grade watering pipe 20 mm bore , wire mesh , charcoal or coke and commn salt in alternate layers of 15 cm compacted thickness all around the earth electrode with concrete pit in PCC 1:3:6 type C-1 with 50 mm thick precast RCC cover in PCC 1:2:4 type B-1 cover slab reinforced with 8 mm dia deformed bars @ 15 cm c/c with suitable handle of 10 mm dia round bar , 15 mm bore medium grade pipe for earth lead protection incl necessary excavation and earth wok in soft / loose soil and disposal of spoil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 of MES SSR Part-I complete all as specified and directed.

M/S Goutam Chakraborty

M/S SANJIB DEB

Younus Khan

M/S LUIT CONSTRUCTION

M/S M P Sharma

m/s builders and suppliers

M/S TAPAN KUMAR RAY

Bhuiya Construction

SURANA CORPORATION

P K ROY & SONS

MS AFTAB LASKAR

M/S MOLOY KUMAR DEY