Construction of Protection Wall and Stone Pitching Work on Baler-Karanpur-Kailadevi Road at Ch 51/900 SH-123 in PWD Division Mandrail

Earth work in excavation for foundation of structure complete with all lift, dewatering, shoring and shuttering etc. including refilling of trenches in 250 mm layers, ramming, watering and disposal of surplus earth with all lifts and lead upto 1000 meters exclusive of compensation of earth as per MoRTH specification Clause 301 to 305. In ordinary soil Depth upto 3 metre

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Clause 5.3.7.2 of IRC:89, no fragment weighing less than 25 kg laid dry complete as per drawing and MoRTH specifications Clause 2503.2

Providing and laying Cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification as per MoRTH Specification : Section 1500, 1700 & 2100 including form work at any level. For All Rajasthan except Hanumangarh. P.C.C. grade M15

Cement Concrete for plain/reinforced concrete in open foundation at any level, complete as per drawing and technical specifications as per MoRTH Specification: Section1200,1500& 1700 including formwork etc. Well curb, R.C.C. grade M30

Supplying, fitting, andplacing TMT bar reinforcement (Primary Steel) in Foundation, Substructure and super structure at any level complete as per drawing and MoRTH specifications Clauses 1009,1600 and 2302

Providing A.C pipe Weep holes 150mm dia in Masonry/Plain Concrete/.Reinforced Concrete abutment, wing wall/return wall complete as per drawing and technical specfication as per MoRTH Specification Clause 2205

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size to wards the soil and bigger size to wards the wall and providing over the entire surface behind abutment, wingwall, return wall to the full height, compacted to firm condition complete as per drawing and MoRTH specification Clause 2204.6 & 2504.2.2

Back filling behind abutment, wing wall and return wall in 150mm layers, with mechanical compaction, complete with all lead and lift as per drawing and technical specification as per MoRTH Specification : Clause : 304. Sandy material

Providing and laying pitching on slopes laid over prepared filter media as per drawing and MoRTH specifications Clause 2504.2.1, Stone/Boulder. For All Rajasthan excep tBikaner, Hanuman garh and Sri Ganganagar

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ ground level, fixed on CRC rolled channel vertical post, 150 x 75 x 5 mm spaced 2 mm centre to centre, 1.8 m high, 1.1 m below ground / road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS: 1367 and IS: 1364 , metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per MoRTH specification Clause 811.3.