J&K

Active

Works

Electrical Works

Supply, Installation, Testing and Commissioning for provision of augmentation of Power Infrastructure for providing Power Supply to newly constructed prefab structures at Civil Secretariat, Jammu under the Jurisdiction of Electric Division-I (JPDCL)

DC-PDD

ED-I, Parade Jammu | Jammu, Jammu And Kashmir

Amount: Refer DocsCloses: 12 Oct 20262d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published5 Oct 2026
Closes12 Oct 2026
Bid Opening13 Oct 2026

Tender Value

Refer Docs

EMD Value

₹1.1 L

Closing Date

12 Oct 2026, 2:00 pm2d left

Tender Inviting Organisation

Name

Xen ED-1 Parade Jammu

Address

Office of the Executive Engineer, Electric Division-I (JPDCL), Parade, Jammu

Work Description

Supply, Installation, Testing and Commissioning for provision of augmentation of Power Infrastructure for providing Power Supply to newly constructed prefab structures at Civil Secretariat, Jammu under the Jurisdiction of Electric Division-I (JPDCL).

Tender Information

Tender ID

2026_PDD_327136_1

Reference Number

ED-I/e-NIT/30 of 2026-27 dated 05.10.2026

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Turn-key

Period of Work

30 days

Location

ED-I, Parade Jammu

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical

RequiredScanned copy of EMD Bank Challan (.pdf)

RequiredScanned copy of PAN Card, GST return, GST registration, ITR (.pdf)

RequiredScanned copy of Affidavit Blacklisting (.pdf)

RequiredScanned copy of Annul Turn Over Certificate of last 3 years (.pdf)

RequiredScanned copy of Class A Certificate (.pdf)

RequiredScanned and signed copy of SBD (.pdf)

RequiredScanned copy of Relevant experience and other miss. Conditions (.pdf)

RequiredScanned copy of GTP (.pdf)

Finance

RequiredPrice Bid/BOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,000

Tender Fee Payable To

Executive Engineer, ED-1, Parade, Jammu

EMD Fee Amount

₹1.1 L

Important Dates

Last Activity

5 Oct 2026

Published

5 Oct 2026

Bid Opening

13 Oct 2026

Download Starts

6 Oct 2026

Download Ends

12 Oct 2026

Submission Starts

6 Oct 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (11 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1SITC for provision of augmentation of Power Infrastructure for providing Power Supply to newly constructed prefab structures at Civil Secretariat, Jammu
1.01	XLPE 300 mm² LT Cable 3.5 core (Incoming upto Ist & 2nd Panel) (2 Ckts 500x2= 1000 Mtr)	1,000	Mtr.	-	-
1.02	XLPE 120 mm² LT Cable 3.5 core (Upto Ist Outgoing Panel) for Lighting/Heating Ckts (2 no. Ckts 500x2=1000 Mtr)	1,000	Mtr.	-	-
1.03	XLPE 95 mm² LT Cable 3.5 core (Upto 2nd outgoing Panel) for Lighting/Heating Ckts (2no. Ckts 500x2=1000 Mtr)	1,000	Mtr.	-	-
1.04	Supply of outdoor type double front floor mounted low voltage panel IP55 Manufactured by CPRI type tested vendors having valid type test certificate, suitable for operation on 415 V 3 phase, 50 Hz supply, enclosure made of 1.6/2.00 mm thick CRCA sheet steel material. Aluminium Bus bar with following switchgears and metering. Necessary arrangement be made for termination of incoming cables and outgoing cables. Contractor to get the G.A. drawings approved before execution. Incomer:- 1 No. 400 Amps, 4 Pole MCCB 36 KA alongwith both sides spreaders, extended rotary operating mechanism, digital MFM showing VAF, Wh, VA, PF, W alongwith control MCBs. BUS BAR TPN aluminium Bus Bar (having 100% Neutral) Minimum of 500 Amp capacity (consider 1 A/mm2 with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar support of required size and their spacing etc. 1 set. Bus bar shall be high conductivity of 6101A EC Grade. Outgoings:- 4 Nos. 160 Amps 4 Pole MCCB 25 KA.	1	No.	-	-
1.05	Supply of outdoor type double front floor mounted low voltage panel IP55 Manufactured by CPRI type tested vendors having valid type test certificate, suitable for operation on 415 V 3 phase, 50 Hz supply, enclosure made of 1.6/2.00 mm thick CRCA sheet steel Material, Aluminium Bus bar with following switchgears and metering. Necessary arrangement be made for termination of incoming cables and outgoing cables. Contractor to get the G.A. drawings approved before execution. Incomer:- 1 No. 400 Amps, 4 Pole MCCB 36 KA alongwith both sides spreaders, extended rotary operating mechanism, digital MFM showing VAF, Wh, VA, PF, W alongwith control MCBs. BUS BAR TPN aluminium Bus Bar (having 100% Neutral) Minimum of 500 Amps capacity (consider 1 A/mm2 with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar support of required size and their spacing etc. 1 set. Bus bar shall be high conductivity of 6101A EC Grade. Outgoings:- 3 Nos. 250 Amps 4 Pole MCCB 25 KA.	1	No.	-	-
1.06	Supply of Indoor Wall mounted Low Voltage single front panel IP42 Manufactured by CPRI type tested vendors having valid type test certificate, for operation on 415 V 3 phase, 50 Hz supply, enclosure made of 2.00 mm thick CRCA sheet steel Material Aluminium Bus bar with following switchgears and metering. Necessary arrangement be made for termination of incoming cables and outgoing cables. Contractor to get the G.A. drawings approved before execution. Incomer:- 1 No. 250Amps, 4 Pole MCCB 36 KA digital MFM showing VAF, Wh, VA, PF, W alongwith control MCBs. BUS BAR TPN aluminium Bus Bar (having Neutral) Minimum of 500 Amp capacity (consider 1 A/ sq.mm with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar support of required size and their spacing etc.1 set. Bus bar shall be high conductivity of 6101A EC Grade. Outgoings:- 16 Nos. 40 Amps 2 Pole MCBs.	2	No.	-	-
1.07	Supply of Indoor wall mounted low voltage single front panel IP 42 Manufactured by CPRI type tested vendors having valid type test certificate, suitable for operation on 415 V 3 phase, 50 Hz supply, enclosure made of 2.00 mm thick CRCA sheet steel Material, Aluminium Bus bar with following switchgears and metering. Necessary arrangement be made for termination of incoming cables and outgoing cables. Contractor to get the G.A. drawings approved before execution. Incomer:- 01 No. 160 Amps, 4 Pole MCCB 36 KA digital MFM showing VAF, Wh, VA, PF, W alongwith control MCBs. BUS BAR TPN aluminium Bus Bar (having 100% Neutral) Minimum of 300 Amps capacity (consider 1 A/sq. mm with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar support of required size and their spacing etc. 1 set. Bus bar shall be high conductivity of 6101A EC Grade. Outgoing:- 16 Nos. 32 Amps 2 Pole MCBs.	2	No.	-	-
1.08	M.S. Angle Iron 1½" (For Brackets laying of Cable)	250	Kg	-	-
1.09	Al Busbar Strip 1" (For Clamping of Cables)	150	Kg	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.25 MB

Work Item Documents

SBD30.pdf

Tender Documents • 0.69 MB

BOQ_1106658.xls

BOQ • 0.37 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1SITC for provision of augmentation of Power Infrastructure for providing Power Supply to newly constructed prefab structures at Civil Secretariat, Jammu
1.01	XLPE 300 mm² LT Cable 3.5 core (Incoming upto Ist & 2nd Panel) (2 Ckts 500x2= 1000 Mtr)	1,000	Mtr.	-	-
1.02	XLPE 120 mm² LT Cable 3.5 core (Upto Ist Outgoing Panel) for Lighting/Heating Ckts (2 no. Ckts 500x2=1000 Mtr)	1,000	Mtr.	-	-
1.03	XLPE 95 mm² LT Cable 3.5 core (Upto 2nd outgoing Panel) for Lighting/Heating Ckts (2no. Ckts 500x2=1000 Mtr)	1,000	Mtr.	-	-
1.04	Supply of outdoor type double front floor mounted low voltage panel IP55 Manufactured by CPRI type tested vendors having valid type test certificate, suitable for operation on 415 V 3 phase, 50 Hz supply, enclosure made of 1.6/2.00 mm thick CRCA sheet steel material. Aluminium Bus bar with following switchgears and metering. Necessary arrangement be made for termination of incoming cables and outgoing cables. Contractor to get the G.A. drawings approved before execution. Incomer:- 1 No. 400 Amps, 4 Pole MCCB 36 KA alongwith both sides spreaders, extended rotary operating mechanism, digital MFM showing VAF, Wh, VA, PF, W alongwith control MCBs. BUS BAR TPN aluminium Bus Bar (having 100% Neutral) Minimum of 500 Amp capacity (consider 1 A/mm2 with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar support of required size and their spacing etc. 1 set. Bus bar shall be high conductivity of 6101A EC Grade. Outgoings:- 4 Nos. 160 Amps 4 Pole MCCB 25 KA.	1	No.	-	-
1.05	Supply of outdoor type double front floor mounted low voltage panel IP55 Manufactured by CPRI type tested vendors having valid type test certificate, suitable for operation on 415 V 3 phase, 50 Hz supply, enclosure made of 1.6/2.00 mm thick CRCA sheet steel Material, Aluminium Bus bar with following switchgears and metering. Necessary arrangement be made for termination of incoming cables and outgoing cables. Contractor to get the G.A. drawings approved before execution. Incomer:- 1 No. 400 Amps, 4 Pole MCCB 36 KA alongwith both sides spreaders, extended rotary operating mechanism, digital MFM showing VAF, Wh, VA, PF, W alongwith control MCBs. BUS BAR TPN aluminium Bus Bar (having 100% Neutral) Minimum of 500 Amps capacity (consider 1 A/mm2 with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar support of required size and their spacing etc. 1 set. Bus bar shall be high conductivity of 6101A EC Grade. Outgoings:- 3 Nos. 250 Amps 4 Pole MCCB 25 KA.	1	No.	-	-
1.06	Supply of Indoor Wall mounted Low Voltage single front panel IP42 Manufactured by CPRI type tested vendors having valid type test certificate, for operation on 415 V 3 phase, 50 Hz supply, enclosure made of 2.00 mm thick CRCA sheet steel Material Aluminium Bus bar with following switchgears and metering. Necessary arrangement be made for termination of incoming cables and outgoing cables. Contractor to get the G.A. drawings approved before execution. Incomer:- 1 No. 250Amps, 4 Pole MCCB 36 KA digital MFM showing VAF, Wh, VA, PF, W alongwith control MCBs. BUS BAR TPN aluminium Bus Bar (having Neutral) Minimum of 500 Amp capacity (consider 1 A/ sq.mm with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar support of required size and their spacing etc.1 set. Bus bar shall be high conductivity of 6101A EC Grade. Outgoings:- 16 Nos. 40 Amps 2 Pole MCBs.	2	No.	-	-
1.07	Supply of Indoor wall mounted low voltage single front panel IP 42 Manufactured by CPRI type tested vendors having valid type test certificate, suitable for operation on 415 V 3 phase, 50 Hz supply, enclosure made of 2.00 mm thick CRCA sheet steel Material, Aluminium Bus bar with following switchgears and metering. Necessary arrangement be made for termination of incoming cables and outgoing cables. Contractor to get the G.A. drawings approved before execution. Incomer:- 01 No. 160 Amps, 4 Pole MCCB 36 KA digital MFM showing VAF, Wh, VA, PF, W alongwith control MCBs. BUS BAR TPN aluminium Bus Bar (having 100% Neutral) Minimum of 300 Amps capacity (consider 1 A/sq. mm with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar support of required size and their spacing etc. 1 set. Bus bar shall be high conductivity of 6101A EC Grade. Outgoing:- 16 Nos. 32 Amps 2 Pole MCBs.	2	No.	-	-
1.08	M.S. Angle Iron 1½" (For Brackets laying of Cable)	250	Kg	-	-
1.09	Al Busbar Strip 1" (For Clamping of Cables)	150	Kg	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1SITC for provision of augmentation of Power Infrastructure for providing Power Supply to newly constructed prefab structures at Civil Secretariat, Jammu

1.01

XLPE 300 mm² LT Cable 3.5 core (Incoming upto Ist & 2nd Panel) (2 Ckts 500x2= 1000 Mtr)

1,000

Mtr.

1.02

XLPE 120 mm² LT Cable 3.5 core (Upto Ist Outgoing Panel) for Lighting/Heating Ckts (2 no. Ckts 500x2=1000 Mtr)

1,000

Mtr.

1.03

XLPE 95 mm² LT Cable 3.5 core (Upto 2nd outgoing Panel) for Lighting/Heating Ckts (2no. Ckts 500x2=1000 Mtr)

1,000

Mtr.

1.04

Supply of outdoor type double front floor mounted low voltage panel IP55 Manufactured by CPRI type tested vendors having valid type test certificate, suitable for operation on 415 V 3 phase, 50 Hz supply, enclosure made of 1.6/2.00 mm thick CRCA sheet steel material. Aluminium Bus bar with following switchgears and metering. Necessary arrangement be made for termination of incoming cables and outgoing cables. Contractor to get the G.A. drawings approved before execution. Incomer:- 1 No. 400 Amps, 4 Pole MCCB 36 KA alongwith both sides spreaders, extended rotary operating mechanism, digital MFM showing VAF, Wh, VA, PF, W alongwith control MCBs. BUS BAR TPN aluminium Bus Bar (having 100% Neutral) Minimum of 500 Amp capacity (consider 1 A/mm2 with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar support of required size and their spacing etc. 1 set. Bus bar shall be high conductivity of 6101A EC Grade. Outgoings:- 4 Nos. 160 Amps 4 Pole MCCB 25 KA.

No.

1.05

Supply of outdoor type double front floor mounted low voltage panel IP55 Manufactured by CPRI type tested vendors having valid type test certificate, suitable for operation on 415 V 3 phase, 50 Hz supply, enclosure made of 1.6/2.00 mm thick CRCA sheet steel Material, Aluminium Bus bar with following switchgears and metering. Necessary arrangement be made for termination of incoming cables and outgoing cables. Contractor to get the G.A. drawings approved before execution. Incomer:- 1 No. 400 Amps, 4 Pole MCCB 36 KA alongwith both sides spreaders, extended rotary operating mechanism, digital MFM showing VAF, Wh, VA, PF, W alongwith control MCBs. BUS BAR TPN aluminium Bus Bar (having 100% Neutral) Minimum of 500 Amps capacity (consider 1 A/mm2 with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar support of required size and their spacing etc. 1 set. Bus bar shall be high conductivity of 6101A EC Grade. Outgoings:- 3 Nos. 250 Amps 4 Pole MCCB 25 KA.

No.

1.06

Supply of Indoor Wall mounted Low Voltage single front panel IP42 Manufactured by CPRI type tested vendors having valid type test certificate, for operation on 415 V 3 phase, 50 Hz supply, enclosure made of 2.00 mm thick CRCA sheet steel Material Aluminium Bus bar with following switchgears and metering. Necessary arrangement be made for termination of incoming cables and outgoing cables. Contractor to get the G.A. drawings approved before execution. Incomer:- 1 No. 250Amps, 4 Pole MCCB 36 KA digital MFM showing VAF, Wh, VA, PF, W alongwith control MCBs. BUS BAR TPN aluminium Bus Bar (having Neutral) Minimum of 500 Amp capacity (consider 1 A/ sq.mm with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar support of required size and their spacing etc.1 set. Bus bar shall be high conductivity of 6101A EC Grade. Outgoings:- 16 Nos. 40 Amps 2 Pole MCBs.

No.

1.07

Supply of Indoor wall mounted low voltage single front panel IP 42 Manufactured by CPRI type tested vendors having valid type test certificate, suitable for operation on 415 V 3 phase, 50 Hz supply, enclosure made of 2.00 mm thick CRCA sheet steel Material, Aluminium Bus bar with following switchgears and metering. Necessary arrangement be made for termination of incoming cables and outgoing cables. Contractor to get the G.A. drawings approved before execution. Incomer:- 01 No. 160 Amps, 4 Pole MCCB 36 KA digital MFM showing VAF, Wh, VA, PF, W alongwith control MCBs. BUS BAR TPN aluminium Bus Bar (having 100% Neutral) Minimum of 300 Amps capacity (consider 1 A/sq. mm with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar support of required size and their spacing etc. 1 set. Bus bar shall be high conductivity of 6101A EC Grade. Outgoing:- 16 Nos. 32 Amps 2 Pole MCBs.

No.

1.08

M.S. Angle Iron 1½" (For Brackets laying of Cable)

250

1.09

Al Busbar Strip 1" (For Clamping of Cables)

150