ADDN/ALTN TO GROUND FLOOR SMQs AT AV CAMP (PH-I)

Amount

Dismatling floor, hearth or wall tilling including cement mortor bedding and backing removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of concrete in ground floors and pavings n exc 15cm thickness (below the ground level) cement concrete unreinforced complete all as specified and as directed.

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings dressed stone ware and precast concrete articles complete all as specified and as directed.

M & L for pre cast cement concrete block masonry with solid block exc 10 cm thick in width (with plain or interlocking joints as directed) complete, in walls and set in cement mortar 1:6 of PCC 1:3:6 (Type C-1) all as specified and as directed.

Taking down cement plaster on brick or stone walls or concrete surfaces including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

Taking up or down steel tubing and connections, 15mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm bore complete all as specified and as directed.

M & L Cutting chases, pinning in making good to facings where required in Brick walls and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm girth but not exc 20 cm girth all as specified and as directed.

S & F for 16 mm dia bore CPVC pipes SDR 11 & plain CPVC SDR11 fittings on walls and ceiling or laying in floors, with all fittings complete all as specified. Make- PRINCE/FINOLEX/BIRLA AEROCON/SUPREME

S & F for 20 mm dia bore CPVC pipes SDR 11 & plain CPVC SDR11 fittings on walls and ceiling or laying in floors, with all fittings complete all as specified and as directed. Make- PRINCE/FINOLEX/BIRLA AEROCON/ SUPREME

S&F 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball complete all as specified and directed. Make- PARYAG/ SINTEX/ PRINCE

M&L for 20 mm dia Gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick walls finished even and smooth without using extra cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed in any position on walls, under floors or in trenches etc complete. Make- PRINCE/FINOLEX/BIRLA AEROCON/ SUPREME

S&F PVC (SWR) bends 75mm bore

M & L PVC floor trap with grating including jointing with solvent cement, 75 mm dia outlet.

S&F PVC (SWR) multi floor trap with grating 75mm setting and jointing with solvent cement, fixed in repairs

S&F 110 mm grating setting and jointing with solvent cement, fixed in repairs

Taking down chowkhats or frames with shutters not exc. 1.5 sq. m Each (without taking off shutters from the frames) complete all as specified and as directed.

Supply and fixing Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube in openings all as specified. Make- RAJSHRI/BLACK COBRA/ DURAPLAST/ SINTEX

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all specified and as directed. Make- RAJSHRI/BLACK COBRA/ DURAPLAST/ SINTEX

Supply and fixing 100mm long extruded alluminium alloy handle, cast type, anodized all as specified

Supply and fixing 100 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply and fixing 125 mm long butt hinges, medium weight cold rold mild steel and fixed.

M&L for non skid coloured ceramic tiles 7mm thick of size 400mX400mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15mm thick in 1:4 complete all as specified and as directe.

M&L for glazed ceramic coloured tiles in vertical surfaces 350x250 x 7 mm / 450x350x7 mm thick , set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and above 15mm thick cement plaster in 1:3 as backing coat complete all as specified and as directed

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white, complete with trap, fixed to floor with fixing bolts and seat cover, including connection to drain (or out going pipe) and to flushing pipe, anti - syphonage pipe etc., including making good to floorcomplete, fixed in repairs all as specified and as directed.

PVC connections 450mm long between ends with 2 Nos. brass nuts and washers, 15mm size, fixed in repairs, all as specified and as directed.

Supply only PVC low level flushing cistern, 10 litres capacity, with chromium plated brass inlet and outlet connections including provision of PVC brackets, PVC flush pipe with bend 32 mm dia of suitable length and making necessary connections to water supply pipe line all as specified and as directed.(Note:Make should be same as of WC make) .

S&F in repairs chromium plated shower rose with swivel joints including fixing to GI pipe for 125mm dia

S&F in repairs, Tubular tower rail, CP Brass, 20mm dia, D Type, 60cm long between flanges, complete all as specified and directed.

S&F in repair wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed.

S&F in repairs, health faucet (ABS body) mild steel chrominium plated suitable for 15 mm dia pipe with 1.25 metere longflexible tube and ABS walll hook including making connection and fixing in position , complete all as specified.

S&F in repairs 15mm chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete.

S&F in repairs 15mm chromium plated pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot'or 'cold'with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete.

S&F in repairs, 15mm chromium plated bib taps, Cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs two in one Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge

S&F fancy type angle cock of brass chromium plated with ling shank screwed for iron pipe and fixed (15mm minimum weight 90gms) 15mm dia fixed to iron pipe in repairs

Surface excavation n.exc 30 cm deep and averaraging 15 cm deep and getting out Hard/dense soil.

Material& labour for Hardcore of guage exc 63 mm ,deposited,spread and levelled in layers n exc.15cm thick,watered and rammed to a true surface complete all as specified and directed.

Material & labour 100 mm thick for concrete 1:4:8 type D2 (using 40 mm graded stone aggregate ) in as in Sub base/Subfloors all as specified and directed.

Material and labour for Providing and laying at or near ground level factory made kerb stone of M-25 graded cement concrete in position to the required lines,level and curvature,jointed with cement mortar 1:3 (1 cement 3 coarse sand ),including making joints with or without grooves (thickness of joints except at curve shall not to more 5mm),includins making drainage opening wherever required complete. Make- BHARAT/ MEHTAB/ ULTRA/ MODERN

Material and labour Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking parver blocks(rubber moulded top) into the sand bedding layer through vibratory compaction by using plate vibratory, filling the joints with sand and cutting of parver blocks as per required size and pattern, finishing and sweeping extra sand; complet all as specified and as directed. Make- BHARAT/ MEHTAB/ ULTRA/ MODERN

Material and labour for preparation of new plastered surfaces of wall and applying two coats of synthetic enemal paint (ordinary tint) over a coat of priming of any description over 10 cm girth or width complete all as specified and as directed

Removing excavated material to a distance exc.1.5km but n.exc 5km and depositing where directed at a level above the starting point

docileworx

OM ENTERPRISES

PRAGATHI BUILDERS