SPECIAL REPAIRS TO BLDG NO T-9 BLOCK AND SPECIAL REPAIRS TO BLDG NO T-8 JCOS MARRIED ACCN AT SOL UNDER GE CHENNAI

Amount

BOQ UPLOADED ON 05 FEB 2022

M&L for precast RCC (1:1½:3) type A-1 using 20mm graded aggregate as in manhole covers, landings, chullah hoods, chajjas with plain faces set in cement mortar (1:4) complete all as specified and directed.

M&L for reinforced cement concrete, M-30 (Design mix), using 20mm and below graded stone aggregate as in roof slabs supported on walls, beams and columns in floors, roofs, deck slabs and the like complete all as specified and directed.

M&L for reinforced cement concrete, M-30 (Design mix), using 20mm and below graded stone aggregate as in roof beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Supply only integral water proofing compound all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan to any radius in half brick thick walls in cement mortar (1:4) complete all as specified and directed.

M&L cleaning of reinforcement bars of anY dia in any RCC member by scraping and removing the rust completely by using suitable rust removing liquid (Shali Prime RC of STP Ltd or equivalent) and applying epoxy based anti-corrosive paint (Shali Prime Zn R of STP Ltd or equivalent) as per manufacturer's instructions including 10mm thick rendering over concrete surface in cement mortar (1:3) mixed with epoxy based bonding agent (Shali Mortar M of STP Ltd or equivalent) in the proportion recommended by the manufacturer as directed. Note: (i) The work is to be executed upto a height upto 10.00m from the ground level and the quoted rate shall be deemed to include for this aspect. (ii) The quoted rate shall be deemed to include for element of special scaffolding required for executing this item.

M&L for demolition of highly deteriorated portion of RCC beams, pillars, chajjas and lintels etc. at height upto 10.00m and applying bonding agent Shali SRB latex of STP Ltd or equivalent on concrete surface as per manufacturer's recommendations, casting RCC member cement concrete (1:1½:3) using 12.5mm graded stone aggregate mixed with plasticiser admixture powder STP No. 1 of STP Ltd or equivalent @ 1 kg per 50 kg of cement or in proportion recommended by the manufacturer including necessary formwork complete all as specified and directed. Notes: Grouting of cracks, cleaning of existing reinforcement with rust remover, application of anti-corrosive paint and replacement of reinforcement wherever necessary before recasting RCC shall be measured and paid for separately. However, cost factor towards special scaffolding required for carrying out these items of work at various heights shall be deemed to be included in the quoted rates.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including cutting & polishing laid over and including 15mm thick screed in cement mortar (1:4) including moulding and grinding the edges and making hole for gas pipe and dismantling the old stone complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, including supports, overhangs, etc. also splays between floors and beams complete of flat rough finished surfaces of concrete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick of flat rough finished surfaces of concrete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide flat rough finished surfaces of concrete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area n. exc. 1.5 sqm each including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but not exc. 4sqm each including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each including all fittings complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each and resecuring in the same opening after cutting, easening etc. with new iron mongry complete all as specified and as directed.

M&L for second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube all as per relevant details given in SSR against item No. 08095 of SSR Part-II and fitted to chowkats complete all as specified and as directed.

S&F factory made solid panel moulded PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; galvalvanized of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and shown in sketch for item No. 8080 in SSR Part-II complete.

S&F for 2nd class hardwood glazed and skeleton window/ ventilator shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc., size of members as specified in SSR Pt 1 section 8 clause 8.24 (b) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.

S&F second class hard wood, plain framed, 35mm thick paneled shutters (any number of panels) with rails and panel of 12mm thick veneered particle board with commercial veneering on both faces, the size of rail and stile are as per IS 1003 (part I) Kiln seasoned and chemically pressure treated and fitted to chowkats complete all as specified and as directed.

S&F mild steel butt hinges, medium weight cold rolled 100mm size all as specified and directed.

S&F in repairs continuous piano hinge mild steel bright finish or elactro-galvanized width of flap (when open) 30mm complete all as specified and directed.

S&F extruded aluminium alloy handles cast type galvanized 150mm size all as specified and directed.

S&F aluminium galvanized barrel tower bolts of extruded section 125mm long all as specified and directed.

S&F aluminium galvanized barrel tower bolts of extruded section 200mm long all as specified and directed.

S&F aluminium alloy galvanized sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repairs mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F hasp and staple 100mm size, aluminium anodized safety type with mild steel hinge pin including bolt to hinge plate fixed with screws complete all as specified and directed.

S&F decorative type CP Harrison rails 25mm dia mild steel CP with designer brackets (one pair in each opening) stops, rollers etc. fixed in repairs complete all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wooden/ steel frames with aluminium wire staples complete all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wooden/ steel frames with aluminium wire staples fixed in repairs complete all as specified and directed.

M&L for 10mm dia and over mild steel TMT bars as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

M&L for mild steel work in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, guard bars, grills bolts etc. and similar conforming to FE-290, Gde E 165 complete all as specified and directed.

M&L for MS framed brackets of angles or tees with web and flanges cut to shape drilled and counter sunk for screw including bending and welding angles as necessary gusset plates, riveting etc. confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) frames for doors, windows and ventilator with one or more rebates including joining cleats for fixing complete all as specified and directed.

S&F aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters of frame section 75mm x 30mm of minimum thickness 2.00mm including 02 No. 75mm long SS hinges, 02 No. 125mm long aluminium tower bolts and 01 No. 100mm long aluminium handle using aluminium for frame, louvers including powder coated aluminium snap beads, screws and fixed with 4.00mm thick glass including necessary jointing cleats glazing clips, rubber packing, galvanized aluminium snap beads, screws, and one wire mesh shutter fixed on frame including stainless steel wire mesh complete all as specified and directed. Note: Glass panes and wire mesh will be measured and paid for separately.

S&F aluminium powder coated (minimum thickness of powder coating 50 micron) window security grills DG 104 with aluminium channel frame and 6mm thick wire section 75mm aperture fixed with joining cleats etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering fixed with self tapping screws as per manufacturer’s instruction complete all as specified and directed.

M&L for APP modified prefabricated polymeric membrane, 3mm thick of weight not less than 3.6Kg/Sqm reinforced with non-woven polyester matt, black finished on cold sticker and torch application of membrane with 10cm over lap after necessary preparation of roof surface over 10mm thick screed in cement mortar (1:4) when concrete is green mixed with and including WPC as per manufacturer's instructions including water proofing treatment consisting of the following all as specified:- (i) One coat of bitumen primer @ 0.40 Kg/Sqm. (ii) One coat of bonding material of blown type bitumen of grade 85/25 heated with working temperature of 180°C and applied @ 1.20 Kg per square meter of the surface area. (iii) A layer of APP modified polymeric membrane of specified thickness and weight. (iv) Top most layer of surface finished with one coat of heat resisting aluminium paint @ 0.10 kg/ Sqm. (v) Rate of WPC shall be inclusive in the quoted rate and nothing extra will be paid.

M&L for 18/ 19mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed to timber frame work with screws as in cupboard shutters, shelves etc. fixed in repairs complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.06 Sqm but n. exc. 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L Non skid white ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.11 Sqm but n. exc. 0.18 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

S&F coloured glazed ceramic tiles as in vertical surfaces of size 300mm x 450mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rendering in cement mortar (1:3) complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in flooring finished fair and even complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-1 using 20mm stone graded aggregate as in plinth protection/ path including filling of joints by bitumen and sand in ratio (1:2) complete all as specified and directed.

Roughening of old concrete surface by picking, sweeping cleaning and washing down with water to remove dust etc. all as specified and as directed.

Taking down cement plaster on brick work or stone walls etc including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with water proofing compound and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in cement mortar (1:3) on ceiling finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for applying three coats of white wash on ceilings including preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying two coats of white wash on ceilings including preparation of old treated surface complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of weather proof paint (Apex Ultima of Asian Paints or equivalent from other specified makes) over and including a coat of exterior primer complete all as specified and directed.

M&L for complete removal of existing treatment from wall surface with electric blade, washing, rubbing down and stopping and applying two coats of weather proof exterior acrylic emulsion paint (Apex Ultima of Asian or equivalent of other specified makes) over a coat of white primer complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for complete removal of existing treatment with electric operated blade, washing with water and bleaching powder solution from wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty/ wooden beads as directed in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F figured glass 4mm thick pin head type and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L preparation of new wooden or wood based surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old treated wooden or wood based surface and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron works new or old treating ends of posts, back of chowkats etc. with tar or coal tar black paint area tarred exc. 0.1 sqm but n. exc. 0.5sqm each complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron works new or old treating small articles such as hold fast etc. with tar or coal tar black paint area tarred n. exc. 0.1sqm each complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550 x 400mm including cutting for and pinning in the ends of bracket or erecting stand but excluding tap, waste chain, plug and porcelain stopper but including brackets and 32mm dia PVC waste coupling with waste pipe fixed in repairs complete all as specified and directed.

S&F vitreous china wash down water closet squatting pan Orissa pattern of size 580mm x 440mm with integral foot rest (white or light coloured) including making necessary connection to soil pipes and flushing cistern fixed in repairs complete all as specified and directed.

M&L vitreous china wash down water closet pedestal pattern white with including white coloured PVC seat cover including connections to drain (or outgoing pipe) and flush pipe etc. fixed in repairs complete all as specified and directed.

S&F PVC low level flushing cistern 10 litre with complete accessories such as PVC flush pipe, over flow pipe etc. fixed in repairs complete all as specified and directed.

S&F 15mm PVC connection 450mm long with brass nuts of superior quality all as specified and directed.

S&F 15mm dia bib taps brass chromium plated, fancy type, long body with flange with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed complete all as specified and directed.

S&F fancy type pillar tap cast copper alloy with capstan heads chromium plated screwed down, high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts screwed for 15mm bore iron pipe complete all as specified and directed.

S&F angle stop valve, cast copper alloy, chromium plated, fancy type with long shank & cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for union complete all as specified and directed.

S&F in repairs 15mm dia concealed brass chromium plated stop cock with flange as per Cat No. 7318 of Prayag or equivalent from other specified makes complete all as specified and directed.

S&F 600mm x 450mm galvanized edged looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror and fixed to wall with raw plugs and chromium plated brass screws and cup washers etc., complete all as specified and directed.

S&F in repairs corner glass shelf superior quality, chromium plated (MCH/ Colour CP) with brass bracket as per Cat No. BEA-45 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs stainless steel sink with draining board of overall size 914mm x 460mm x 203mm and bowl size 405mm x 354mm x 203mm made out of 1mm thick stainless steel sheet of grade AI SI-304 with plugs, washers, waste coupling and 40mm dia waste pipe, fixed over CI brackets and connecting union to pipe etc., compete all as specified and directed. Make: Prayag Cat No. 1239D or equivalent from other makes specified in Particular specifications.

S&F in repairs SS towel rail as per Cat No. BA-10S of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs PTMT shelf 18" long as per cat No. 191 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs ABS shower rose of size 125mm including brass shower arm 225mm long with bend of 45° with flange fixing with 15mm dia pipe complete all as specified and directed. Make: Prayag Cat No. BS-76 or equivalent from other makes specified in particular specifications.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc., including taking up or down the existing GI tubing complete all as specified and directed.

S&F galvanised steel water tubing 20mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc., including taking up or down the existing GI tubing complete all as specified and directed.

S&F galvanised steel water tubing 25mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc., including taking up or down the existing GI tubing complete all as specified and directed.

Taking up or down 15mm bore GI tubing and re-fixing the same in new/ old location after cleaning and re-threading including provision of new fittings complete all as specified and directed.

Taking up or down 20mm bore GI tubing and re-fixing the same in new/ old location after cleaning and re-threading including provision of new fittings complete all as specified and directed.

Taking up or down 25mm bore GI tubing and re-fixing the same in new/ old location after cleaning and re-threading including provision of new fittings complete all as specified and directed.

S&F 500 litre capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F ball valve PTMT with epoxy coated aluminium rod for 25mm bore pipe, weight not less than 210gms, high pressure with polyethylene high density float and complete screwed for iron pipe fixed in repairs complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down old pipes complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches including taking up existing pipe complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore all as specified and directed.

S&F PVC (SWR) bend 110mm dia any radius with access door all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single ‘Y’ equal or unequal with access door complete all as specified and directed.

M&L for PVC (SWR) floor trap 110mm dia plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above GL including removal of debris to outside MD land complete all as specified and as directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars, ashlars facings, dressed stone work and pre cast concrete articles etc., complete all as specified and as directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, stair landings, chajjas and similar suspended works including separating, scraping and cleaning reinforcement complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise provided for including separating, scraping and cleaning reinforcement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Taking down old unserviceable/ damaged point wiring carefully of any size and description on teak wood batten/ through pipe (light, fan, socket etc.) including removal of battens, pipes/ conduits, sockets, switches, shades, ceiling fittings, bulk head fittings ceiling rose etc. complete and making good disturbed portion of wall to match with the existing surface all as specified and directed.

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non-metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/roof etc. including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc. including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-

One light point controlled by one switch.

One Fan/ Exhaust fan point controlled by one switch.

One 3 pin 5 amps socket outlet on the same board with other switches controlled by one switch.

One 3 pin switch socket outlet, 5 Amps on independent board controlled by one switch.

Bell/ buzzer point controlled by one bell push.

One light point controlled by two No. 2-way switches.

M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100 V grade conforming to IS -694 drawn through and including new non-metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc. including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc. including provision of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly for one socket outlet (plug point) three pin 15 Amps controlled by one switch 15 Amps on independent board complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.

Supply and fix switch piano, flush type, single pole, two way, 5 Amps, 230 volts all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amps, 230 volts all as specified and directed.

S&F switch piano, flush type, single pole, one way, 15 Amps, 230 volts complete all as specified and directed.

S&F socket outlet 3 pin, 15 Amp, flush type, 230 volts all as specified and directed.

S&F ceiling rose PVC/ polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed.

Supply and fix call bell/ buzzer multi tune, 230 volts AC all as specified and directed.

Supply and fix bell bush, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.

Supply and fix lamp holder insulated body with back plate for batten fittings/ angle holder as required complete all as specified and directed.

S&F electronic ceiling fan regulator, flush type, 300 watts all as specified and directed.

S&F high speed BEE 5 star rated standard plain ceiling fan of 1200mm sweep (colour as approved by GE) 230V, 50HZ single phase fixed with suitable clamp and down rod (GI Pipe) including taking down existing ceiling fan and depositing the same in storeyard of AGE E/M complete all as specified and directed.

S&F turbo force 4 blade (300mm sweep) exhaust fans AC single phase 230/ 240 volts, heavy duty corrosion resistant body rigid frame with rubber mountings for minimal noise operation & maintenance free design with pressure die cast aluminium rotor mounted on two ball bearings with maximum air with minimum power consumption conforming to IS: 2312-1967 including taking down existing ceiling fan and depositing the same in storeyard of AGE E/M complete all as specified and directed.

Supply and fix 09 watts LED lamp complete all as specified and directed.

S&F basic all-purpose surface and wall mounted LED batten 20 watt light fitting with aluminium housing and integrated electronic driver including 20 watt LED tube fixed on wall or ceiling including taking down the old fitting complete all as specified and directed. Make: CG Cat Part No. LDL-20-CDL or equivalent of other makes specified in particular specifications.

S&F basic all-purpose surface and wall mounted LED batten 10 watt light fitting with aluminium housing and integrated electronic driver including 10 watt LED tube fixed on wall or ceiling including taking down the old fitting complete all as specified and directed. Make: CG Cat Part No. LDL-10-CDL or equivalent of other makes specified in particular specifications.

S&F fix environmental friendly, ultra-modern, energy saving, surface mounted 10 Watts LED decorative oval bulkhead edge-lit LED luminaire comprising of high brightness including taking down the old fitting complete all as specified and directed. Make: C&S Cat No. SIRIUS/10W or equivalent of other makes specified in particular specifications.

S&F environmental friendly, ultra modern, energy saving, surface mounted decorative oval bulkhead edge-lit LED luminaire comprising of high brightness fixed in repairs complete all as specified and directed. Make: Philips Cat No. WT202W LED6S NW PSU S2 PC or equivalent from other specified makes.

S&F 18 watts round edge pro range slim fit low profile downlight giving superior light output and uniformity including taking down the old fitting complete all as specified and as directed. Make: Philips Cat No. DN091B LED6S-6500 PSU WH or equivalent from other specified makes.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, TPN, 4 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 8 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing isolator MCB SP, 63 Amps, 415 volts including taking down the existing one complete all as specified and directed.

Supply, fix, connecting and testing isolator MCB SPN, 63 Amps, 415 volts including taking down the existing one complete all as specified and directed.

Supply, fix, connecting and testing MCB single pole (MCB SP), 6 to 32 Amps, 240 volts of rupturing capacity 10kA, C curve type including taking down the existing one complete all as specified and directed.

Supply, fix, connecting and testing MCCB four pole 125 Amps, 415 volts breaking capacity, 16kA with adjustable thermal setting conforming to IS: 13947-II fixed in repairs complete all as specified and directed.

Taking down existing energy meter for carrying out repairs to building, keeping in safe custody and refixing in the same location/ quarter after completion of repairs complete all as specified and as directed.

M&L for submain wiring complete with two runs of 4.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including rigid non metallic PVC conduit medium grade ISI marked 25mm external dia fixed on wall/ floor/ ceiling along with conduit fittings and accessories, fixed on ceiling with one run of 4.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring with conduit any type complete all as specified. Note: Two runs of 4.0sqmm multistranded cable and one run of 4.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

M&L for submain wiring complete with two runs of 6.0 Sqmm single core, multi-stranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non-metallic PVC conduit medium grade ISI marked 25mm external dia concealed in wall/ floor along with conduit fittings and accessories, fixed on ceiling with one run of 6.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified. Note: Two runs of 6.0sqmm multi-stranded cable and one run of 6.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

M&L for submain wiring complete with two runs of 10.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including rigid non metallic PVC conduit medium grade ISI marked 25mm external dia fixed on wall/ floor/ ceiling along with conduit fittings and accessories, fixed on ceiling with one run of 10.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring with conduit any type complete all as specified. Note: Two runs of 10.0sqmm multistranded cable and one run of 10.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

Earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6.0mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.5m below normal ground level, earth plate connected to galvanized iron earth strip of size 25mm x 4mm as earthing conductor by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR part I (2009) connected to earth test point/ main switch/ DB/ Panel board all as specified or indicated including testing on completion with and including 32mm bore light grade GI protection pipe for earth strip including PCC (1:3:6) type C1 pit with 40mm thick precast RCC (1:2:4) type B-1 cover reinforced with 8mm dia MS bars @ 100mm c/c both ways with lifting hooks made out of 12mm dia MS bars, wire mesh funnel with watering pipe 20mm dia light grade, common salt, charcoal filling in layers as specified, necessary excavation and earth work in any type of soil etc., testing on completion including dismantling existing earthing complete all as specified and as directed.

SHRI BALAJI CONSTRUCTIONS

M/s.Sai Agency

RMK INDUSTRIES