GES/PKT/21/2024-25 REPAIR/ MAINT AND CLEANING OF SEWAGE LINE, MANHOLES, SEPTIC TANKS IN MD ACCN AREA AT UNCHIBASSI UNDER GE SOUTH PATHANKOT

Amount

S&F of 150 mm dia RCC NP3 pipe laid and jointed complete including providing 100 mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone agg as in bed for pipes incl packing under and huaunching against the sides of pipes after they are laid tested including taking down old damaged SGSW/UPVC/RCC pipes from existing lines including necessary excavation as per requirement of old fitted in trenches complete all as specified and directed.

S&F of 200 mm dia RCC NP3 pipe laid and jointed complete including providing 150 mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone agg as in bed for pipes incl packing under and huaunching against the sides of pipes after they are laid tested including taking down old damaged SGSW/UPVC/RCC pipes from existing lines including necessary excavation as per requirement of old fitted in trenches complete all as specified and directed .

S&F of UPVC underground drawings pipe (UDS) type 'B' 200mm dia with wall thickness 4mm (min) and pressured 4 KN /Mtr Sq jointed in cement solvent complete including providing 150 mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone agg as in bed for 200mm bore pipes incl packing under and huaunching against the sides of pipes after they are laid tested including taking down old damaged SGSW pipes from existing lines including necessary excavation of old fitted in trenches complete all as specified and directed .

All as per serial item No. 03 here-in-before but 160 mm dia complete all as specified and directed .

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and making good of broken manhole.

Cleaning and de-silting of manholes depth not exceeding 1.50 meter by pumping out/removing liquid waste/ sewage/ sludge and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge, solids, semi solids etc, sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt, sludge &other waste material) in leak proof trucks covered with tarpaulin to outside of MOD land all as per existing rules and regulations of civil authorities and flushing sewage line & manholes with adequate water as to make sewage line fully functional including reinstating the manhole cover to its original position complete all as specified and directed.

All as per Item No. 6 here-in-above but depth exc 1.5 mtr complete all as specified and directed.

Cleaning and de-silting of sewage lines of any dia bore at any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge either manually or mechanical means using truck mounted hydraulic jet pressure or as required on ground, including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt, sludge &other waste material) in leak proof trucks covered with tarpaulin to outside of MD land all as per existing rules and regulations of civil authorities and flushing sewage line & manholes with adequate water as to make sewage line fully functional including reinstating the manhole cover to its original position complete all as specified and directed by Engr-in-Charge. (Note: Length of sewage lines including chambers, traps etc will be measured for payment. However cleaning of manholes shall be measured separately under appropriate item.)

M&L to attend and rectify sewage complaint on daily routine basis as per complaint lodged by user at complaint cell of AGE B/R Sub division by deploying manpower by Cleaning/clearing blockage of bathroom/kitchen/WC Indian/WC European by cleaning the Nahani trap/gully trap/floor trap/Intercepting trap/P or S trap/multi floor trap etc of any description and in any position below or above ground level at different locations ,flushing down with adequate water, removing & taking out of all materials such as sludge/ soil waste/polythene /mud/silt/liquid/semi liquid /semi solid/solid or any others items etc to make the entire system functional complete all as specified and directed. Note:- (i) The quoted rates shall be included for opening of access & closing properly. (ii) Contractor/supervisor take complaint from JE concerned all day and ensure to resolve all complaint within same day. In case of non attending complaints in same day, recovery @250 per complaint will be recovered from the contractor.

Cleaning of septic tanks/soakage well of any size, capacity & depth by Mechanically using sewage tankers/ Truck mounted hydraulic jet pressure machine with flushing the sewage line with heavy duty sewage pumps sewage suction pump, by desluding, dewatering, taking out of all materials such as sludge/ soil waste/polythene /mud/silt/liquid/semi liquid /semi solid/solid or any unwanted items etc, including flushing with adequate water to make the fully functional, re-fixing opened access cover and removing all retrieved material outside the periphery of defence land. Note :- The measurement for the quantity of sludge removed will be arrived by multiplying the inner dimensions of septic tank to actual depth of sludge deposited by dipping the measuring rod. The depth shall be of that wet surface sludge on measuring rod for payment purpose. Note for serial item No. 08 & 10 : Contractor/supervisor take complaint from JE concerned all day and ensure to resolve all complaint within same day. Incase of non attending complaints sufficent time as decided by Engr-in-Charge but not more than 3 day ,recovery @ 1000 per day will be recovered from contractor.

M&L for 100mm Cast iron sanitary connection ‘P’ branch, with branch 375 to 450 mm long, complete all as specified and directed

M&L for repairs 75mm Cast iron floor trap, with SS grating including jointing to waste pipe fixed in cement type B-1 1: 2:4 and making good wall or floor tiling to match existing surface, complete all as specified and directed

M&L 75mm CI Bends (any radius), with oval access door diminishing pieces or tapers (larger bore measured), complete all as specified and directed

M&L 75mm CI Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed

M&L for 75 mm dia CI cross 'T' double junction , (double T), equal or unequal, complete all as specified and directed

S&F 100 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall, complete all as specified and directed

All as per serial item No. 16 here-in-above but 75mm, complete all as specified and directed.

M&L for 100mm CI Bends (any radius), with oval access door diminishing pieces or tapers (larger bore measured), complete all as specified and directed

S&F in repair bib taps long body fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed,

S&F in repairs 15mm bore angle valve, cast copper alloy, chromium plated screwed down fancy type high pressure screwed both ends for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair PVC cabinet mirror of size 300x450mm fixed with screw and PVC gutty on wall complete all as specified and directed

S&F in repair fancy type Pillar tap cast copper alloy chromium plated with capstan heads screwed down high pressure or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F GI tube 15mm bore medium grade galvanized ISI marked with all fittings complete on walls complete all as specified and directed including taking up or down GI pipes 15mm bore and connection including cleaning for refixing or removal un-serviceable pipe.

S&F GI tube 20mm bore medium grade galvanized with all fittings and fixed to short length complete all as specified and directed including taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceable pipe,

S&F 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with clamps complete all as specified and directed.

S&F 75mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with clamps complete all as specified and directed.

S&F for 110mm bore, PVC (SWR) bends any radius fitting to PVC (SWR) pipes as in repair complete all as specified and directed.

S&F for 110mm bore ,PVC (SWR) 'P' trap as in repair complete all as specified and directed.

S&F for 75mm bore ,PVC (SWR) 'floor' trap as in repair complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the center line over fittings and accessories)

S&F for PVC waste pipe 32mm dia, 60 cm long for WHB with cup, fixed in repairs, complete all as specified and directed

S&F grating round 100 mm size of stain less steel as in repair, complete all as specified and directed.

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6 mtr mean radius complete all as specified and directed.

All as per description of item 34 here-in-above but except bricks complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete unreinforced of any description in any position not otherwise specifically provided for complete all as specified and directed

M&L PCC 1:5:10, type E-2, (using 40mm graded crushed stone aggregate) in foundation filling/sunken floor and mass concrete, complete all as specified and directed

Taking down cement plaster on brick or concrete surface and description including raking out joints hacking for key scrubbing down with water,

M&L for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 10mm thick in cement mortar 1:6 on fair aces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying three coats of white wash, complete all as specified and directed

M&L for Preparation of new surfaces and applying two coat of cement base paint over a coat of white wash on walls, complete all as specified and directed

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed

M&L for Providing precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs and similar articles including necessary moulds/formwork set in cement mortar (1:6) complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 110mm bore PVC 'P' or 'S' trap complete incl making good to floor complete all as specifed and directed.

S&F in repair for Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat cover white colour or in matching colour with closet closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed.

S&F in repair Vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement; including waste pipe, complete all as specified and as directed.

M&L for water spreader for urinals chromium plated fixed with screws and wooden/PVC gutty complete all as specified & directed.

S&F in repair vitreous china wash hand basin white of bowl size 550x400mm including waste coupling to be fixed over mild steel bracket including complete all as specified and directed.

S&F in repair vitreous china wash hand basin white colour ,ceramic over counter ,oval shape size 45x45x20 cm complete incl coupling all as specified and directed.

S&F in repairs low level 10 liters capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve float oval handle including 32mm dia PVC flushing pipe complete all as specified and directed by Engr-in-Charge.

Dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises,

M&L for non skid ceramic joint free coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic joint free coloured tiles of size 450 x 350 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4, all as specified and directed.

M&L for Vitrified Ceramic light shade tiles 9 to10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over screed bed 15 mm thick in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L for 18- 20 mm thick Granite ( table rubbed and polished) of any type work on cooking platform and like in cement mortar(1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite.

Demolition of stone slabs, paver blocks and tiles of any description or thickness in floors/apron laid, bedded and pointed in any mortar, complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 litre incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe fly nuts incl dismantling water tanks (Capacity of tank exc 250 litre but n exc 500 litre) and removing from site, complete all as specified.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 litre incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively and fly nuts incl dismantling water tanks (Capacity of tank exc 500 litre but n exc 1000 litre) and removing from site, complete all as specified.

M&L for 20mm Gun metal globe or gate valve with iron wheel head, screwed both ends for iron and fixed in repairs, complete all as specified and directed.

Disconnecting existing tanks, exc 250 liter n exc 500 liter setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc, complete all as specified & directed

Disconnecting existing tanks, exc 500 liter n exc 1000 liter setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, all as specified & directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast, complete all as specified and directed.

Taking down shutters of any description exc 1Sqm but n exc 2Sqm each, complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS Square tube, supplying & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life.

S&F factory made solid PVC door shutter, 28 to 30mm thick (style) with 2,4 or 6 raised panel design with 2mm moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face with wood free EPS, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain framed factory made glazed and skelton shutters open rebated and prepared to receive glass/ wire gauge etc. (without sash bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a), complete all as specified and directed.

S&F 35mm thick plain framed panelled door shutters of 2nd class hard wood (Factory made) two panel with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.

S&F 300mm long Aluminium anodized sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate two on staple plate, complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces including preparation of surface and one coat of pink primer, complete all as specified and directed.

S&F butt hinges 100mm, cold rolled medium weight mild steel , complete all as specified and directed.

S&F 150mm size, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.

S&F 150mm long aluminium tower bolts (ISI Marked) extruded type, complete all as specified and directed.

S&F steel window/ventilator with tubular frame factory made double shutters of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter glazed and gauged with glazing bars 12x3mm flat iron incl projecting type hinges with steel handles and steel peg stay dovetailed or welded incl including necessary locking arrangement complete, incl two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. Note: Wire gauge, grill and glass shall be measured and paid separately.

S&F Mild steel framed work such as grills, gratings using square/round bar with ends of bars shoulders/welded drilling holes for fixing of guard bars, complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane, complete all as specified and directed.

S&F Galvanized mild steel wire cloth 0.46mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples/ wooden beading complete all as specified and directed.

M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F in repair 20mm ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair 25mm ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repairs SS Tubular towel rail of chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs, complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair brass chromium plated shower rose 75mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including all necessary from work, complete all as specified and directed.

S&F for Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repair centre hole basin mixture, fancy type, brass chromium plated mixer (central hole basin mixer w/o pop up waste system) for mixing hot & cold water screwed down for iron pipe of 15mm bore, complete all as specified and directed.

Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account. (ii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.

ADVAIT CONSTRUCTION CO (BID ID -3114025)

R K ENTERPRISES (BID ID -3101476)

M/S SHRI RAM BUILDERS (BID ID -3112611)

satpal and brothers (BID ID -3113631)

jagdambe traders (BID ID -3113576)

RAJINDER ELECTRICAL WORKS (BID ID -3112749)

S S CONSTRUCTION (BID ID -3113498)

kailu construction co (BID ID -3113534)

M/S KLM ENTERPRISES (BID ID -3113025)