CERTAIN REPAIR WORKS TO FLOORING, PLINTH PROTECTION, PLASTERING, CHAJJA, PLUMBING WORKS, ETC IN OTM AND MD ACCN IN ZONE B AREA UNDER AGE(I) NAVY CHENNAI

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided including padding concrete on roof complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete 25 mm thick type B-1, 1:2:4 using 20 mm graded stone aggregate as in sub base for flooring complete all as specified and as directed by Engineer-in-Charge.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 15mm of thick CM 1:6 for laying floor finishes complete all as specified and as directed by Engineer-in-Charge.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15mm thick screed bed with CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises including removing of all the debris to a distance n exc 2 km out side the base at the disposal of the contractor complete all as specified and as directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles 350 x 250mm x7mm/450 X 350 X 7mm thick as in dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering10mm thick plaster on fair faces of brick work/concrete in CM 1:3 to receive tiles as in dado complete all as specified and as directed by Engineer-in-Charge.

M&L for Cutting and Polishing on terrazzo/kota stone to give high gloss finish complete all as specified and as directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or any thickness in floors, skirtings, risers etc laid ,bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry in floors and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid & enosing jointed over and including 20mm cement screed in CM 1:6 complete all as specified and as directed by Engineer-in-Charge..

S&F in repairs Galvanised steel water tubing 15 mm dia Medium grade and connections, including all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Galvanised steel water tubing 20 mm dia Medium grade and connections, including all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Galvanised steel water tubing 25 mm dia Medium grade and connections, including all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Galvanised steel water tubing 40 mm dia Medium grade and connections, including all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed by Engineer-in-Charge.

Cutting chases, pinning in , for concealed water tubing on brick or stone walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Gun metal 40 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Gun metal 25 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed complete all as specified and as directed by Engineer-in-Charge.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding , low level flushing cistern and Flush pipe of 32mm dia but including seat cover) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair vitreous china squating pan "Orissa" patern size 580 x 440mm white with 'P' or 'S' trap front or back inlet with integral foot rest (excluding flushing cistern and flush pipe), squating pan including connection to trap and flushing pipe, anit syphonic pipe etc complete incl making good to floor complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC valve less flushing cistern low level 10 litres capacity with syphonic action type with inlet ball valves, float and handle and connections to pipes and fixing of chain and pull (or) lever including brackets and 32mm dia PVC flush pipe of 60cm long complete all as specified and as directed by Engineer-in-Charge.

S&F in repairsVitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair vitreous china, wash hand basin white flat back size 550 x 400 mm white complete waste, chain and pug and precelain stopper including bracket complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs plastic water closet seat cover white/closed pattern with flat bottom and cover and MS CP or aluminum hinges device complete all as specified and as directed by Engineer-in-Charge.

S&F in repair bib taps concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipes of 15mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F 15mm bore Brass 2 in 1 CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Health Faucet for 15mm dia with 1.5m long easy flex tube in Chrome finish and wall look complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Angle valves fancy type,chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs stop cock concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Brass chromium plated shower rose 125mm size, including shower arm with or without swivel joints,complete all as specified and as directed by Engineer-in-Charge.

S&Fing in repairs fancy type pillar tap 15mm dia, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut screwed for iron pipe & fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipes or connections including necessary packing union and cap complete all as specified and as directed by Engineer-in-Charge.

S&Fing in repair 32mm waste fittings brass of chromium plated for wash basin etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge.

M&L for PVC waste pipe with 32 mm dia as waste pipe to WHB/urinal/sink as in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F in repair of PVC (SWR) multiple Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and as directed by Engineer-in-Charge.

S&F in Aluminium anodised Tubular towel rail , 20mm dia, 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs grating doom 125 mm dia with waste hole of PTMT (Min weight 40 gms) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe for 20 mm bore dia & fixed.(Minimum weight 210gms) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe for 25 mm bore dia & fixed.(Minimum weight 455 gms) complete all as specified and as directed by Engineer-in-Charge.

S&F PVC water tank 500 lit capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old & taking to store complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC water tank seat cover with fittings suitable upto 1000 litres capacity complete all as specified and as directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc of tank capacity exceeding 250 litres and not exceeding 500 litres complete all as specified and as directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc of tank capacity exceeding 500 litres and not exceeding 1000 litres complete all as specified and as directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe etc of tank capacity exceeding 1000 Ltrs and not exceeding 2000 Ltrs complete all as specified and as directed by Engineer-in-Charge.

Checking and attending to water leakage from taps WCs, flushing cistern, urinals, wash basins bottle traps etc and any obstruction to water supply requiring plumber work and carry out minor repairs such like replacement of washers, check nuts, tightening of fittings, adjustment of float valves and syphon fittings of flushing cistern, cleaning of bottle traps etc including cost of petty materials like washers of all size, safeda, thread (soot), M-seal, screws, nails to make it functional and leak proof all as specified and directed by Engineer-in-Charge (Note : If spindle is to be replaced the same will be measured and paid at supply only rates) complete all as specified and as directed by Engineer-in-Charge.

Removing plants/herbs grown on walls/junctions with roots using herbicide chemicals and of existing brick and concrete in high raised building at any storeyed and making good the disturbed surfaces as per existing complete all as specified and as directed by Engineer-in-Charge.

M&L for Clearing the blockage in the water closets of any type completly preferably by manually means to enable the flush water to flow freely to the manholes,complete all as specified and as directed by Engineer-in-Charge.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-Charge.

M&L Old size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius,built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for Old size half brick thick walls with flyash bricks , straight or curved on plan to any radius in half brick built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster on brick walls or stone walls including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed by Engineer-in-Charge.

M&L Rendering 5mm thick on ceiling in CM 1:3 finished even and smooth complete all as specified and as directed by Engineer-in-Charge.

M&L Rendering for 10mm thick in cement mortar (1:6) on other than fair faces of internal bricks or concrete surfaces finished even and smooth complete all as specified and as directed by Engineer-in-Charge.

M&L Rendering for 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and as directed by Engineer-in-Charge.

M&L Preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing newly plastered surfaces and applying two coats of distemper oil emulsion over coat of primer on surfaces of walls complete all as specified and as directed by Engineer-in-Charge.

M &L applying two coat of Cement base paint over a coat of primer alkali resistance on newly plastered or unplastered wall surface including preparation of surface, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair aluminium anodised tubular curtain rail 20mm dia complete all as specified and as directed by Engineer-in-Charge.

S&F aluminium anodised, brackets for curtain rods in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Door closer hydraulically regulated of Extruded Aluminium Section, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 300mm, ordinary mild steel rat tail rod pattern springs including roller and roller platecomplete all as specified and as directed by Engineer-in-Charge.

S&F in repair aluminium hat pegs solid body 125mm to 175mm long complete all as specified and as directed by Engineer-in-Charge.

S&F in repair aluminium wardrobe hooks (single) solid body 50mm to 60mm long complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Aluminium 4- levers Mortice lock, vertical type, size 100 mm Complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge.

S&F 4mm thick sheet glass, ordinary quality, in squares n.exc 0.5 sq.m each pane complete all as specified and as directed by Engineer-in-Charge.

S&F 5.5mm thick sheet glass, ordinary quality, in squares n.exc 0.5 sq.m each pane complete all as specified and as directed by Engineer-in-Charge.

S&F 5.5mm thick sheet glass, ordinary quality, in squares exc 0.5 sq.m each pane complete all as specified and as directed by Engineer-in-Charge.

S&F 5.5mm thick frosted sheet glass, ordinary quality, in squares exc 0.5 sq.m each pane complete all as specified and as directed by Engineer-in-Charge.

S&F 4mm thick sheet glass, pinheaded type ordinary quality, in squares n.exc 0.5 sq.m each pane complete all as specified and as directed by Engineer-in-Charge.

S&F Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with beading to wooden frames complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with beading to wooden frames complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed by Engineer-in-Charge.

S&F for framed worked such as grills, grating, etc with ends of bars shoulders and/or rivited or forged into spikes, framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of new steel surfaces of any descriptions and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

M&L Preparation of old painted Steel surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying One coats of Synthetic Enamel paint. complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

kvs constructions