Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.6 LAccepted-AOC SAHEED UDHAM SINGH NAGAR THANDI KHUEE SUJANPUR PATHANKOT 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L1 | Accepted-AOC Lowest bid. | |
| 2 | L2₹30.7 L+₹6,985 (0.23%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bid. | |
| 3 | L3₹32.7 L+₹2.0 L (6.59%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bid. | |
| 4 | L4₹32.7 L+₹2.1 L (6.74%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bid. | |
| 5 | L5₹33.2 L+₹2.5 L (8.26%)Rejected-Finance DALHOUSIE ROAD BYE PASS CHOWK PATHANKOT 145001 PUNJAB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L5 | Rejected-Finance Other than lowest bid. |
Tender Value
₹34.9 L
EMD Value
₹69,800
Closing Date
25 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) MAMUN
GE (South) Mamun, Mil Stn Mamun, Pathankot
As specified in BOQ and Tender Documents
2024_MES_658993_2
GE(S)/M-23/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE (South) Mamun, Mil Stn Mamun
As per NIT
10 documents required · 10 mandatory
₹500
GE SOUTH MAMUN
₹69,800
Yes
20 Dec 2024
4 Sept 2024
2 Oct 2024
4 Sept 2024
25 Sept 2024
11 Sept 2024
Amount
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.
Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete/sunken floors complete all as specified and directed.
Returning filling in including spreading, leveling and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and directed.
Removing surplus excavated material to a distance not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specifiedand directed.
M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.
M&L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for use and waste of form work to sides of flat, rough finished surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical to batter complete all as specified and directed.
M&L for use and waste of form work to sides and soffits of flat, rough finished surfaces of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.
M&L for form work to flat, rough finished surfaces of concrete of chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.
M&L for use and waste of form work to sides of square, rectangular or polygonal, rough finished surfaces of concrete of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
M&L for use and waste of form work to soffits of flat, rough finished surfaces of concrete of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for use and waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10 cm but n. exc. 20 cm wide, rough finished surfaces of concrete complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs and mass concrete complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in beams, cantilevers, bressumers, lintels, shelves complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in chajjas etc. complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies and in shelves and the like complete all as specified and directed.
M&L for 15mm thick rendering on faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 10mm thick rendering plaster in cement mortar 1:6, on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick plaster in cement mortar 1:3 on concrete surfaces of ceiling / top and sides of chajjas/facia of roof projection including necessary formwork, finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
All as per description of srl item No. 24.00 here-in-before but on ceiling.
M&L for preparation of newly plastered surfaces of external wall and applying two coats of cement base paint including curing before and after painting, complete all as specified and directed.
S&F pressed steel frame of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and directed. Note:-PCC in hollow of chokhats shall bne measured and paid separately.
M&L for PCC 1:3:6, nominal mix type C-0 (using 12.5mm graded crushed stone aggregate) as in filling in hollow of pressed steel door frames/chowkats complete all as specified and directed.
S&F 1mm thick steel rolling shutters, without ball bearing as specified including top cover, anchoring rod, hasp and staple, push pull or manual type and one shop coat of primer, erected in position as indicated complete all as specified and directed.
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.
S&F factory made 35mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.
S&F GI wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/aluminium beads complete all as specified and directed.
S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
M&L for preparation of newly surfaces of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.
M&L for preparation of new surfaces of wooden & wood based articles of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150 mm long aluminium handle cast type anodised complete all as specified and directed.
M&L for 25 mm thick PCC type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in sub floors, finishing surface of concrete even and rough to receive floor topping complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6, type C-1, using 20mm graded stone aggregate as in plinth protection, finished even and smooth using extra cement, incl forming necessary joint and filling with mixture of paving bitumen & sand in 1:3 complete all as specified and directed.
M&L for machine cut Kota stone slab flooring 18-20mm thick, size of each slab not less than 55cmx55cm, with 75mm wide white marble border alround, laid over & including 15 mm thick screed bed in cement mortar 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing using grinding machine to yield mirror finish complete all as specified and directed.
M&L for Machine cut kota stone slab not less than 15 mm thick as in riser of steps, skirting, dado and pillar laid over & including 10 mm thick screed base in CM 1:4, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing using grinding machine to yield mirror finish, complete all as specified and directed.
M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjas / canopy / parapet wall, to be executed through approved applicator of the membrane manufactured with following specifications, complete all as specified and directed :- (a) Cleaning the top surface of RCC roofing properly with water. (b) Applying bitumen primer @ 0.30 Litre / Sqm, manufactured by the same agency as that of APP with a density 0.87-0.89 KG / Litre at 25 degree centigrade on prepared surface. (c) Laying of membrane not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 KG/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10cm overlap and 15cm end lap. (d) Top of membrane shall be provided with solar reflective bituminous aluminum paint @ 0.10 KG / Sqm as prescribed by manufacturer of membrane. (e) APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC 1:2:4, type B-0.
M&L for rendering plaster 15 mm thick in cement mortar 1:3, mixed with liquid water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid separately as supply only.
Supply only liquid water proofing compound complete all as specified and directed.
Removing surplus excavated material to a distance exc 250 mtrs but n exc 500 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in sub base of floors complete all as specified and directed.
M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size having high glossy finish confirming to IS 15658-2006 of 60mm thickness epoxy coated, M-35 Grade, laid dry over and including 50mm thick sand cushion using clean & washed river sand as approved complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching, floor by maintaining required gradient / undulation etc slightly rounded or chamferred angles and throating, complte all as specified and directed.
M&L for brick work with fly ash bricks, old size as in half brick thick walls built in cement 1:4, straight or curved on plan exc 6 mtr mean radius complete all as specified and directed.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litr and UV resistance as per IS 15489:2004, alkali & fungel resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicone additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.9 litre/10sqm over new surfaces complete all as specified & directed.
S&F factory made single extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 45 x 70mm comprising of vigin PVC polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm , modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- MS hold fasts/lugs or SS fasteners shall bemeasured and paid separately
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR-2020 Part-II.
S&F 3mm thick Figured glass, pinhead type in squares n exc 0.5 sq. m each pane fixed with oil putty complete all as specified and directed.
S&F 100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in sub base of floors surface finished even & rough to receive floor top finish complete all as specified and directed.
M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed .
M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed with coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.
S&F Rotational moulded polyethlene water storage tank, 500 ltrs capacity, three layers, ISI marked, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed refixing of inlet, outlet & over flow pipe etc. (Minimum weight of 20mm ball valve - 210 gms including dismantling of old brocken water tank complete all as specified and as directed.
S&F 20mm PVC Ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
Supply, laying & jointing steel tubes, 15 mm bore 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
Supply, laying & jointing steel tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors and testing complete all as specified & directed.
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed with 20 mm dia pipe complete all as specified and directed.
M&L for cutting existing GI pipe 25/40 mm bore dia for addn/altn, branch connection and inserting of 'Tee' of size 25mm x 25mm x 20mm complete including necessary excavation & earth work complete all as specified and directed. Note: Cost of 25mm x 25mm x 20 mm bore dia Tee and earth work are included in the unit quoted rate.
S&F 15mm bore bib tap, with flange, cast copper alloy fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F Stop valve/Angle valve (ISI Marked), fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore ccomplete all as specified and as directed.
S&F Stainless steel Grating 75mm dia with waste hole complete fixing in floors complete all as specified and directed. .
S&F vitreous china wash hand basin flat back or angle back type, white of bowl size 550mm x 400mm including CP brass waste coupling and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe of 32mm dia, complete all as specified and directed.
S&F 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.
S&F Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover with hinging device for pedestal pan and connecting etc, complete all as specified and directed.
S&F in repairs PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed.
S&F Vitreous China Urinal, half stall type white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with brackets, flush pipe, grating and union for discharge pipe fixed incl supply and fixing of CP coupling, waste pipe, water spreader and all necessary fittings, complete all as specified and directed.
S&F PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.
S&F 75mm bore PVC (SWR) bend, plain, with or without oval access, including jointing with solvent cement, complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend, plain with or without oval access, including jointing with solvent cement, complete all as specified and directed.
S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
M&L 75 mm dia bore PVC (SWR) cowls complete all as specified and directed.
M&L for concrete bed in cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) to drain pipes 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
M&L for RCC drain pipes, class NP-2 of size 150 mm internal bore dia, laid to slope in trenches, jointed in cement mortar 1:1 and tested complete all as specified and directed.
M&L for 15mm thick plaster in cement mortar 1:4, mixed with liquid water proofing compound @ 0.200 ltr per 50 kg bag of cement, on brick masonry surface, finished even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid separately as supply only.
M&L for mild steel work as in handles of cover slab and rungs and similar small articles confirming to Fe-290 grade E-165 complete all as specified and directed.
M&L for pre-cast PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in cover slabs (for drains), shelves, chajja & similar works with plan faces & set in cement mortar 1:4 complete all as specified and directed.
M&L for Septic tank 10 Users designed to carry sewage and sullage water, complete including excavation in any type of soil, PCC 1:4:8 under foundation, RCC M-30 Design Mix in Walls, Base Slab, Baffle walls and Roof Slab and beams etc including Vent shaft , manhole openings with cover and making connection etc., of effective depth 1.5 metre and overall depth of 3 metre complete all as described and shown on Drg No CEPZ/C-TD/013 /13 dated 11 -09- 2013 sheet 1/5 to 5/5.
M&L for Soakage wells of size 1.80m dia x 3.00 m depth including excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed brick masonry in CM 1:4 with sub class B bricks, top ring of RCC, M-25 design mix concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M-25 design mix & SFRC MH cover incl interconnecting pipes of RCC/DWC complete filled with brick bats complete all as shown on Drg No CEPZ/C-TD/013 /13 dated 11 -09- 2013 sheet 1/5 to 5/5 .
Cutting into existing manholes for connecting new drains 150mm bore pipe, making good pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required and making good for complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in sub base of floors complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum in any type of soil getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running railsand guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410 W Gde E 250 quality A complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for 50 mm thick (average thickness) PCC 1:2:4, type B-1 using 20mm graded stone aggregates as in floor finishing to required gradient/undulation, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for Point wiring for one light point / fan point / bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed, FRLS , multistranded copper conductor cable (red, yellow & blue colour) in and including non metalic rigid PVC concealed conduit ISI marked, not less than 20mm dia, medium duty with all necessary fittings such as tee, elbow, socket including sunken steel boxes of suitable size with 3mm thick plastic laminated backelite sheet top for mounting switches sockets etc including FRLS PVC insulated unsheathed multistranded copper conductor cable of size 1.5sqmm (green colour) as continuous earth wire and connecting to earth dolly, and making good to distrubed surfaces of wall/floor to match to existing finishes etc complete all as specified and directed. Note: The unit rate quoted include the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surfaces.
All as per description of srl item No. 95.00 here-in before but for one 5 pin 5 Amps socket outlet point on same board controlled by one switch 5 Amp one way etc, complete all as specified and directed.
All as per description of srl item No. 95.00 here-in before but for one 5 pin 5 Amps socket outlet point on independent board controlled by one switch 5 Amp one way etc, complete all as specified and directed.
M&L point wiring for 2 in 1, multipurpose, 5 pin 15/16 Amps socket outlet point on independent board controlled by one switch using 2.5 Sqmm FRLS PVC insulated unsheathed copper conductor single core multistranded FRLS cable and 2.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in and including connected non metallic rigid PVC conduit of wall thickness 1.8mm including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed. Note:- The unit rate quoted unclude the cost of cutting chases in surface for conduits and fixing sunken boxes and making good the disturbed surfaces to match existing surfaces.
S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete complete all as specified and directed.
S&F ceiling rose, 3 terminals, PVC / polycarbonate, isolated body complete all as specified and directed.
S&F Switch piano flush button single pole, one way 6 Amps, 240 volts polycarbonate body complete all as specified and directed.
S&F socket outlet 3/5 pin, 6A, 230 Volts flush type complete all as specified and directed.
S&F Switch piano, flush type, single pole, one way, 16 Amps 240 volts polycarbonate body complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin, 6 & 16 Amps, flush type, single pole, one way, 230 Volts complete all as specified and directed.
S&F stepped type electronic mini/deluxe fan regulator suitable size/watt for BLDC fan complete all as specified and directed.
S&F building security LED light luminaire 30 W, IP 66, IK-07, AC 230 volts, made up of pressure di-cast iron housing complete making connection using PVC insulated and sheathed3 core multi stranded copper conductor cable of size 0.50 Sqmm from ceiling rose including all as specified and directed.
S&F LED Lamp 12 W, Base B22, BEE 3 Star complete all as specified and directed.
S&F LED Bulk Head luminaries, 10W complete with all accessories and including connector and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete.
S&F LED tube light fittings (4 feet long), wall mounted 1x20 watt 6500K, Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.
S&F energy efficient LED ceiling light 15 W of size 1x1 feet complete with high efficiency PMMA diffuser soft glare light complete with driver holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Note for srl item No 106 to 111 above:- 1. Driver shall be potted anti-vibration types. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be provided. 3. CRI (Colour Rendering Index) of fixture shall be > 70. 4. CCT (Colour Co-related Temperature of fixture shall be 5700K + 300 K. 5. System Lumen Efficacy shall be > 100 Lm/W. 6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. Lenses shall be Modular Type. 8. PCB used shall be MC PCB type. 9. CA No. shall be written on each fitting before installation. 10. The name of manufacturer to be embossed on the fitting.
11. The fittings shall have arrangement so that maintenance required, if any can be carried out from Top cover. 12. The defect liability period of LED lights shall be 05 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over for replacement. 13. A guarantee of 05 years shall be provided by contractor supported by OEM covering all parts of luminaire. Contractor shall deposit security on this account @ 5% of work done against these items otherwise the same shall be deducted from the dues payable to him in RAR/Final Bill.
Supply, assembling and hanging ceiling fan with blades, down rod and accessories, 230volts, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) including making connections using 3 core 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning complete all as specified and directed.
S&F exhaust fan AC single phase 230/240 V 300 mm sweep with suitable metal blades, air delivery not less than 1250 CMH, RPM not less than 1400, copper winding, MS body with louvers shutter with screws/nuts & bolts complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode, 600mmx600mmx6mm size, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electric plate No 3 connected to earth test point/MCB DBs all as specified and indicated complete with funnel, charcoal, dust, salt etc and GI protection pipe, medium grade 15mm bore and GI watering pipe 20mm bore light grade, 40mm thick precast RCC M-15 (nomial mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover, PCC M-15 (Nominal mix) pit, excavation and earth work in any type of soil and connected, complete all as specified & directed. Note:- 1. Earth lead & protection pipes upto & including 7.50 metre length is deemed to be included in the unit rate quoted by the contractor. 2. Earth filling should be free from stones, boulders, aggregate, gravels etc
S&F Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 4- way, 240 volts complete all as specified and directed.
S&F sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar 8 way, 240 volts complete all as specified and directed.
S&F and testing factory made sheet metal enclosure for MCB DB SPL 2 way without bus bar 240 volts with single door, IP-43 protection duly fixed/concealed in wall complete and making good disturbed surfaces of wall floor etc including necessary connection lugging with copper lugs pin/ring type complete all as specified and directed.
S&F MCB single pole 6 to 32 Amps, 240 volts, B-series complete all as specified and directed.
S&F MCB single pole and neutral 63 Amps, 240 volts, C-series complete all as specified and directed.
M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down sand complete all as specified and directed. Note:- Punned thickness shall only be measured and paid.
Supply & laying Bricks, old size, sub class 'B', well burnt laid flat for protection of underground cable, abutting each other, laid dry with width of length of brick equal to width of protection complete all as specified and directed.
Supply and laying in trenches or fixed to wall/pole or passing through ducts or pipe, cable LT 1100 volts grade heavy duty, XLPE insulated, armoured heavy duty electric cable, with aluminium conductor of size 16 Sqmm x 2 core or fixed to wall/pole or passing through ducts or pipe of any size, any core, complete all as specified and directed.
All as per description of srl item No. 122.00 here-in-before but of size 10 Sqmm x 2 core.
S&F 40 mm bore galvanised steel tubing, light grade, with all fittings, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with and including 02 Nos. MS clamp of size 25x4 mm, nuts, bolts and washers complete all as specified and directed.
Supply, Install, Testing and Commisioning of 'solar water heating system' (Evacuated Tube collector) based on direct transferring of heat of capacity 300 LPD with electric backup, 3 runs of 4 Sqmm PVC copper cable from DB to solar panel confirming to ISI marked complete all as specified and directed. Note:- Cold water tank, cold water piping, water piping, submain wiring, point wiring etc are not included in this item, the contractor shall quote the rate accordingly.
S&F of 20mm dia CPVC pipes (Hot & Cold type) SDR 11 with Plain CPVC SDR 11 fittings fixed on walls/ceiling or laying in floors/trenches complete all as specified and directed.
S&F of 25mm dia CPVC pipes (Hot & Cold type) SDR 11 with Plain CPVC SDR 11 fittings fixed on walls/ceiling or laying in floors/trenches complete all as specified and directed.
S&F PP-R ball valve (Brass inserted) of size 20 mm dia screwed for CPVC pipes or brass ferrule and fixed complete all as specified and directed.
S&F PP-R ball valve (Brass inserted) of size 25 mm dia screwed for CPVC pipes or brass ferrule and fixed complete all as specified and directed.
M&L for lagging to pipes used in internal water supply or plumbing all round with 25 mm thick bonded mineral wool performed SNAP ON pipe sections of density 144 kg/cum conforming to IS 9842 covered with chicken mesh wire netting 25 gauge with 0.01 aluminium foil complete all as specified and directed.
S&F 1100 volts grade 6 Sqmm twin core heavy duty cable PVC insulated aluminium conductor multi strand, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire, one twin core cable flat or cicular from elect pole to MCB DB complete all as specified and directed.
M & L for sub main wiring with 4.0 sqmm copper conductor cable multistrand, FRLS PVC sheathed two run (as phase and neutral) and one run 4.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity , drawn in existing surface /recessed steel/ PVC conduit complete all as specified and directed Note: Three runs of wire shall be measured as one unit.
M/S NARESH KUMAR SHARMA (BID ID -3099087)
M/S BASOTRA BUILDERS (BID ID -3113715)
OMKAR SHARMA AND CO (BID ID -3109239)
WALIA ENTERPRISES (BID ID -3097768)
RD Engineers (BID ID -3096749)
Bidder Name
yash paul gupta
OMKAR SHARMA AND CO
WALIA ENTERPRISES
RD Engineers
M/S BASOTRA BUILDERS
M/S NARESH KUMAR SHARMA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .