REPAIR TO KITCHEN BATHROOM TILING SUNEN FLOORS TREATMENT CI PVC PIPES SANTARY FITTINGS PVC DOOR SHUTTERS VENTILATORS TERRACE DOORS AND OTHER MISC REPAIS AT RASHI COMPLEX UNDER AGE BRII OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing rubbish off the premises.

M&L non-skid coloured Ceramic tiles 6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified.

M&L for rendering 10mm thick in cement mortar 1:4 on backing coat of wall tiles etc complete all as specified and directed.

M & L Coloured glazed ceramic tiles 300 x 200 x 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment all as specified and as directed.

M&L non-skid coloured Ceramic tiles 6 to 7mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not excceding 0.18 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified.

S&F in repair Plastic water closet seat cover, white/black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminisied hinges devices complete all as specified and directed.

S&F in repairs vitreous china wash basin white flat back 550 x 400mm , with fitting of PTMT waste coupling suitable size incl pillar tap, PVC waste pipe, waste fitting, stop cock, angle iron brackets with painting of brackets etc complete all as specified and directed .

S&F S/S Soap dishes complete all as directed.

Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms)

S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in repairs

S & F in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S&F in repair Stop valves, cast copper alloy high pressure 15mm bore ISI marked with cruch or butterfly handles screwed down both side for iron pipes complete as specified and directed

S&F in repair 10 litre capacity PVC valveless, syphonic action type, flushing cristern, low level, white, with inlet, ball valve, float and handle including brackets all complete as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm in repairs

S&F in repair 32 mm dia PVC flexible pipe of suitable length for wash hand basin or urinal complete all as specified and directed

S&F in repairs Bib taps, 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6 kgf/cm2 fixed complete to wall, floors for drain out the waste water in Kitchen Sink/wash basin complete all as specified and directed.

S&F Flush pipe of polyethylene of low or high density for low level cistern.

S&F stainless steel tubular towel rail 20mm dia D type 60cm long between flanges all complete as directed.

Taking down & S&F GI Tubing medium grade 15mm bore with all fittings, laid in trenches, wall or roof complete all specified and directed.

Demolition of concrete of any description and in any position all as specified

M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 10 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of liquid membrane over a coat of primer of STP make as per manufacturers instruction over vertival sides of sunken floors. Note : Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound of ISI make.

M&L cement concrete 1:7:12 F2 type with with 40mm graded stone coarse aggregate in sunken floor all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonnage pipe including 'P' or 'S' trap and provn of lime concrete complete all as specified.

S& F in repair vitreous china wash down water closet padestal pattern (Anglo-Indian type) white (excluding fixing bolts, flushing cistern and flush pipe) with 'P' or 'S' trap complete all as specified.

Taking down PVC rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

S & F PVC (SWR) pipes 150mm bore single socketed in any length with rubber ring joints fixed to walls.

S & F PVC (SWR) bends 150mm bore any radius

S & F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls.

S & F PVC (SWR) bends 110mm bore any radius

S & F grating doom 100mm dia of PTMT (Minimum weight 25gms)

Taking down cement plaster of any description on brick walls or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed .

M & L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M&L three coats white washing on new plastered surface on walls including prepration of surface all as specified and directed

Taking down Chowkat or frame with shutter ( without taking off shutters from the frame) n. exc 1.5 sqm each and making good the distrubed surfaces complete all as specified and directed

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 sqm but n. exc 4 sqm each

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame at site as per specification & direction.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & direction.

S&F 100 mm extruded aluminium handles, fabricated type anodised fixed in repairs.

S&F 100mm aluminium anodised barrel tower bolts of extruded section fixed in repairs.

S&F 75mm stailess steel medium weight butt hinges all as specified and directed.

M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in double steps cill of aluminium sliding window 18 to 20 mm thick over 20 mm thick screed bed in cement mortar 1:3 complete all as specified.

M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in lintel and and sides of aluminium sliding window 18 to 20 mm thick over 15 mm thick rendering in CM 1:3 complete all as specified and directed.

S & F powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. Note: Minimum 25 micron anodisation for all aluminium sections)

S&F 4mm thick frosted sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.

M&L aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (7.5mm dia and aperture 50mm) all complete.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165

S & F Mild steel plates chequered, 5 mm thick or over square cut or notched (ordinary or counter sunk forming holes) without any attachment etc. in ducts complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1 ( 20 mm graded crushed stone aggregate) copings, kneelers, apex stones, hold fast bed plates formwork including making good the distrubed surface same as existing surface all as specified and directed.

M&L 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate

S&F mild steel butt hinges100 mm size,medium weight , cold rolled all as specified and directed

M & L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth.

sri ram construction

Unitech Enterprises

ASHOK CONSTRUCTION