CERTAIN SPECIAL REPAIRS AND MINOR WORKS OF 12 DOGRA, 300 COY ASC, SAINIK THEATRE, 23 INF DOU, 308 FD WKSP COY AND SRI NAMKUM UNDER GE RANCHI

Amount

Dismantling AC/ CGI/ translucent ( corrugated, semicorrugated,etc), as in roof covering, complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position, complete all as specified and directed.

Dismantling timber scantling in fillet,rails,post,rafters,purlin etc under 40 sq cm in section, complete all as specified and directed.

Dismantling of roof trusses, purlin, rails fastening, etc, of steel section, complete all as specified and directed.

M&L roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc, complete all as specified and directed.

M&L for MS flat (wind tie) as roof sheet securing incl distance pieces, cleats etc, complete all as specified and directed..

M&L 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roof, walls etc fixed with L type or J-type or cranked hook bolts etc, complete all as specified and directed.

All as per item No 7 above but exept sheet.

M&L asbestos cement two piece adjustable plain wing ridge 6 mm thick fixed with 'J' type hook bolts etc, complete all as specified and directed.

Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets.

M&L for providing aluminium snap Grid frame work for false ceiling with of size 595X595 mm ,using Main and cross tee of size 36.5mmX25mmX1.4mm,weighing 0.24 kg/RM and 23.5mmX26.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's, complete all as specified and directed.

M&L 4mm thick non asbestos fibre designer cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, complete all as specified and directed.

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as specified and directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6, complete all as specified and directed.

M&L Half Brick thick wall with sub class 'B' bricks built in CM 1:4, complete all as specified and directed.

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water, complete all as specified and directed.

M&L 15mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and smooth (Without using extra cement), complete all as specified and directed.

M&L rendering 15mm thick (10mm + 5mm)in CM 1:4 in two layers on fair faces of brick work , finished even and fair without using extra cement with WPC, complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:4 on fair faces of concrete surfaces finished even and fair on wall/chajja/lintel etc, complete all as specified and directed.

M&L three coat of white wash on newly prepared surfaces on wall/cjajj/lintel etc including preparation of surfaces, complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means and preparation of old surfaces applying two coats of white wash, complete all as specified and directed.

M&L preparation of new plastered surfaces of walls and applying two coats of oil bound distemper on walls, white or tinted over a coat of chalk whiting, complete all as specified & directed

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with 2mm thick wall care putty and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted, complete all as specified and directed.

Demoliton of cement concrete in ground floor paving n exc 15cm thickness (below or above ground level), complete all as specified and directed.

M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete.

M&L 40 mm thick PCC type B - 1, 1:2:4 using 20 mm graded stone aggregate as in flooring finish even & smooth using extra cement, complete all as specified and directed.

Supply only 38mm wide glass dividing strips, 3mm thick, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3, complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed.

Roughening surfaces of old concrete floor by picking , sweeping cleanand washing down with water to remove dust etc and Brushing neat cement slurry with 3 kg of cement per Sqm.

M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors, complete all as specified and directed.

M&L for non skid coloured ceramic tiles 300 x300 x7mm thick in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match, complete all as specified and directed.

M&L coloured ceramic glazed tiles 375x250x7mm/450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement, complete all as specified and directed.

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match, complete all as specified and directed.

All as per item No 35 above but as in Skirting with 10mm thick rendering in CM 1:3.

M&L machine pressed precast concrete coloured Inter locking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment, over sand cusion, over compacted surface, complete all as specified and directed.

M&L sand filling under paver including watering and consolidation.

Taking down chowkats or frame with shutters (without taking off shutters from the frame ) not exceeding 1.5 Sqm each incl stacking for issued under Sch of Credit.

All as per above item No 39 above but exc1.5 Sqm but n.exc. 4 Sqm.

Taking down shutters of any description exc 1 Sqm & not exc 2 Sqm each.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame, complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed.

Supply only WPC.

M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165

M&L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete all as specified and directed.

M&L 35 mm thick 2nd class hardwood, factory made plain framed, paneled shutter (three panel) with lock rail and panel of 12mm plywood commercial on both faces. The size of rail and style as per IS: 1003 (Part - 1), kiln seasoned and chemically pressure treated & and fitted to chowkats, complete all as specified and directed.

S&F 30 mm thick 2nd class hardwood, factory made flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats.

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters of any no of panels, divided into squares with plain, chamfered or rounded, mitred & rebated sash bars and prepared to receive glass, gauze etc edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for doors, etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (a) Sample of shutter can be seen in GE's office.

S&F steel windows with side hung shutters incl box type hinges with one no MS flat iron 25x3 mm of appx 200mm length and two nos MS Tower bolt 150mm long and one peg stay on each leaf complete with glazing bars, dovetailed or welded, complete all as specified and directed.

All as per item No 51 above but without glazing bars.

S&F steel window, ventilators, fixed type, with glazing bars.

S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0.

M&L taking down shutter of any description, area n exc 1 Sqm each for repairing the steel windows/cup board shutters in any position by replacing the projecting type hinges (Single pane) welding the new box type hinge and refixing the shutter including applying two coats of synthetic enamel paint over a coat of primer and making the surfaces good, complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc, complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks/wooden patti etc, complete all as specified and directed.

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads, complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane.

M&L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer, complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long, complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long, complete all as specified and directed.

S&F Aluminium anodised handles of extruded section and fixed 125 mm long, complete all as specified and directed.

S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S&F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S&F 250 mm long mild steel sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed.

MS ordinary rat tail rod pattern springs 200mm, including roller and roller plate, complete all as specified and directed.

M&L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer, complete all as specified and directed.

M&L for preparing old painted wooden surfaces of any description not otherwise described , over 10 cm in girth or width and applying one coat of synthetic enamel paint of approved shade, complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm, complete all as specified and directed.

Demolition of cement concrete reinforced as in chullah hoods , shelves and plate form etc, complete all as specified and directed.

M&L for RCC as in kitchen platform, shelves type B-1 1:2:4 (20 mm graded aggregate) including necessary form work, complete all as specified and directed.

S&F mild steel deformed bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc, complete all as specified and directed.

Machine cut cudappa stone slab 16+ 2mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

M&L screed bed or bedding layer of mortar 20 mm thick for layinng floor finishes in CM 1:4 for fixing tiles/stone, complete all as specified and directed.

S&F in repair 500 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top incl PTMT ball valve) hoisted and fixed in position all as specified in SSR Pt-I.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers, waste coupling, waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm, complete all as directed and specifed .

Taking up or down GI steel tubing 15mm bore in any position and connection including fitting, cleanings for reusing if any, complete all as specified and directed.

All as per item No 78 above but 20mm bore.

S&F tubes 15mm bove medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors etc, complete all as specified and directed.

All as per item No 80 above but 20mm bore.

Refixing old galvanised steel tubes 15mm bore & connections on wall 15 mm bore, complete all as specified and directed.

All as per item No 82 above but 20mm bore.

S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc, comlete all as specified and directed.

S&F in repair bib tap 15mm fancy type of PTMT any colour high pressure screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc, complete all as specified and directed .

S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed, complete all as specified and directed

S&F in repairs15mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc, complete all as specified and directed

S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc, complete all as specified and directed

S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc, complete all as directed and specified.

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws, complete all as specified and directed.

S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag).

S&F in repair PVC waste pipe 32/40mm dia, complete all as specified and directed.

S&F CP towel rail, 20mm dia, D type,60cm long, complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete all as specified and directed.

S&F in repair 32mm bore waste coupling of PTMT (half or full threaded) (Min wt 45 gms), complete all as specified and directed.

S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm, complete all as specified and directed.

PVC waste pipe, 32mm bore, 750/900 long for basin/ Sink as in repairs, complete all as specified and as directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

Taking down eaves gutter and rain water pipes (any size or pattern ) including all fittings, heads shoes bend swan necks etc at any position (measure overall as fixed along the centre line over fitting and accessories), complete all as specified and directed.

S& F PVC (SWR) pipe of 110mm dia single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F PVC (SWR) bends or shoe of 110 mm dia bore.

PVC (SWR) junction single, (Single T) 110 mm dia bore equal or unequal.

M&L mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F in repair MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as approved design and fixed to wall, complete all as specified and directed.

S&F fancy type sofia brakcet for the curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of sclaed paint and applying two coats of synthetic enamel paint over a coat of red oxide primer for change of existing colour, complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws, complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge, etc with self tapping screws or J hooks, complete all as specified and directed.

Dismantling wrought iron or mild stel work of any description not other wise provided for ll, complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with guesset plates complete doors etc to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing, complete all as specified and directed.

M&L preparation of new plastered surfaces of walls/chajja/lintel and applying three coats of white wash, complete all as specified and directed.

M&L preparation of new plastered surfaces of walls/chajja/lintel and applying two coats of cement based paint white or tinted over a coat of alkali resistant primer, complete all as specified and directed.

M&L for complete removal of existing surface and applying two coat of cement base paint on walls, etc white or tinted, complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint), any colour, complete all as specified and directed.

M&L preparation of old painted surfaces of steel work of any description, not otherwise described, over 10 CM width or girth and applying one coat of synthetic enamel paint, any colour, complete all as specified and directed.

All as per item No 119 but steel surfaces of any description n.exc 10 cm width or girth when unconnected with other painting or when painted in different tint.

All as per item No 14 above but except bricks.

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc, complete all as specified and directed.

M&L 75 mm thick Plain cement concrete 1:2:4 type B2 using 20mm graded stone aggregate as in floor finishes finished surface even and smooth with using extra cement, complete all as specified and directed.

M & L for Mastic flooring 25-30 mm thick over concrete surface by mixing of hot malted bitumean , course aggregate, crushed stone screenings and lime stone dust shall be fed in successive untill the entire change is throughly incorported. Materials shall be mixed throughly and continiously heated and laid in bays in one coat to uniform level surface, complete all as specified and directed.

Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening, complete all as specified and directed.

M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165

M&L preparation of old decorated surfaces and applying one coat of oil bound distemper on walls, white or tinted, complete all as specified and directed.

M&L 9-10mm thick light coloured vitrified ceramic tiles of size in floors, n.exc. 0.36 Sqm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 20mm thick screed bed in CM 1:4, complete all as specified and directed.

All as per item No 128 above but as in Skirting with 10mm thick rendering in CM 1:3.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium shutters, aluminium section weighing 0.55 Kg/m including necessary joining joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised alumnium snap beading, screws etc, complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and directed.

M&L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing, complete all as specified and directed. Make - Kelwyn / Amar

S&F cast brass fanlight pivot with plate size 25mmx65mm and suitable for shutter of 35mm thick, complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples .

M&L 9mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with alumunium frame work, complete all as specified and directed.

S&F 4.00 mm thick plain Sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc, complete all as specified and directed.

S&F 4.00 mm thick plain Sheet glass, area n exc 0.5 sqm in each pane and fixed to aluminium frame work, complete all as specified and directed.

S&F 4 lever brass mortice lock vertical type size 65mm long, complete all as specified and directed.

S&F fancy type sofia brakcet for the curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 125mm long.

S&F Aluminium anodised handles of extruded section and fixed 125 mm long.

S&F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed.

Taking out exsting earthing, M&L for chemical earthing (Pipe in pipen technology) Two B class IS mild steel pipe, one inside the other, hot dip galvanised with 100 micron coating outside and about 300 micron coaing inside filled with high conductive and corrosion Resistant Crystalline Mixture inside and Backfill compound around the outer electrode) outer electrode dia 76 to 80mm and inner electrode dia 37 to 40 mm both 10' long, incldg making earth pit of size 6' x 6' and 11' deep fill the entire pit with black cotton soil or normal soil, pour enough water so that pit is full with water leave it for three days so that soil soaks up the water the soil level has goes down again top up the pit with soil & fill the water. After two or three days when the pit is sturdy and ready for earthing purpose, install the earthing electrode as per installation method as below:- (a) Mix backfill compound evenly with soil. (b) Remove plastic sleeve carefully from electrode. (c) Place naked electrode at centre of pit. (d) Start refilling empty space around electrode with backfill compound in layers. (e) Pour some water and poke the pit with a long wooden rod to allow trapped air to escape. (f) Gradually continue refilling process till electrode is buried in the pit up to the green patch painted on the top portion of electrode. (g) Ensure that pit is not watery (h) Pack electrode with compound nicely and tightly, so that it stands firmly in pit. (j) Pour a few buckets of water around pit. (k) Pour a few buckets of water around in the pit everday for 10-15 days for system to set. (l) Connect the earth electrode with equipments by 32mm x 6mm copper strip. Note : (a) Earth resistance shll not be more than 1.5 Ohm. (b) Aluminium strip for connections shall be measured and paid separately.

M&L for Aluminium strip 25x3.0mm with GI saddles and fixing screws etc for roof conductors and down conductors above ground, complete all as specified and directed.

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw, complete all as specified and directed.

M&L for Air termination skipe fitted in copper rod 12 mm and 300 mm long inclding PCC, insulation and all items required for fixing, complete all as specified and directed.

BHARATI ENTERPRISES

M/S SURYA BUILDERS

india trading company