REPAIR, PAINTING AND REPLACEMENT OF VARIOUS PARTS OF STEEL FURNITURES AT UMROI MIL STN UNDER GE UMROI

Amount

Almirah Large Steel with Shelves includes following items (refer Drg NoFD-67/1031), Work will be carried out at verious places in station, if required or as directed by Engineer in charge:

M&L for removing existing UNSV handles and S&F new CP handles as per existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV locks and S&F new locks 6 lever ISI Marked of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV 3 way locking device and S&F new 3 way locking device including MS rod of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV clamps and S&F new clamps of existing shape and size including adjustment of shelves where reqd all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV hinges and S&F new hinges of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV base/legs and S&F new base/legs of MS sheet 1mm thick of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV shelves and S&F new shelves made of MS sheet 1mm thick of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Almirah large steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

Almirah Medium/Small Steel with Shelves includes following items (refer Drg NoFD-243/1032), Work will be carried out at verious places in station, if required or as directed by Engineer in charge;-

M&L for removing existing UNSV handles and S&F new CP handles as per existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV locks and S&F new locks 6 lever harrison / Godrej / ISI Marked make of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV 3 way locking device and S&F new 3 way locking device including MS rod of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV clamps and S&F new clamps of existing shape and size including adjustment of shelves where reqd all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV hinges and S&F new hinges of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV base/legs and S&F new base/legs of MS sheet 1mm thick of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV shelves and S&F new shelves made of MS sheet 1mm thick of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Almirah Med steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

Locker Steel includes following items (refer Drg NoFD-257/1029), Work will be carried out at verious places in station, if required or as directed by Engineer in charge;-

M&L for removing existing UNSV handles sets and S&F new CP handles sets as per existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV hasp and stapple S&F new CP hasp and stapple of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV hinges and S&F new hinges of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV base/legs and S&F new base/legs of MS sheet 1mm thick of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV shelves and S&F new shelves made of MS sheet 1mm thick of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV conduit pipe S&F new CP conduit pipe & bracket of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Locker steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

Table office Clerk Steel including following items refer Drg No (FD-84/1004), Work will be carried out at verious places in station, if required or as directed by Engineer in charge :-

M&L for removing existing UNSV Top and S & F new Top made out of prelaminated particle board 18/19 mm exterior grade duly fixed with 4mm thick hard wood beading all round all as specified and shown on drawing or as directed by Engr-in-charge . .

M&L for removing existing UNSV leg and S&F new leg made out of square MS pipe 25 mm dia of 1.6 mm thick fix by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV drawers with box S&F the new drawer with box by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV locks of drawer and S&F new brass locks all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV stiffener S&F new stiffener made of 25 mm sq MS pipe 1.6 mm thick by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV rubber shoe and S & F new hard rubber shoes all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Table office clk steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

Table office officer steel including following items refer Drg No (FD-1002/1003), Work will be carried out at verious places in station, if required or as directed by Engineer in charge :-

M&L for removing existing UNSV Top and S & F new Top made out of prelaminated particle board 18/19 mm exterior grade duly fixed with 4mm thick hard wood beading all round all as specified and shown on drawing or as directed by Engr-in-charge . .

M&L for removing existing UNSV leg and S&F new leg made out of square MS pipe 25 mm dia of 1.6 mm thick fix by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV drawers S&F the new drawer by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV locks of drawer and S&F new brass locks all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV stiffener S&F new stiffener made of 25 mm sq MS pipe 1.6 mm thick by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV rubber shoe and S & F new hard rubber shoes all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Table office offr steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

Table Dining OR including following items refer Drg No (FD-165), Work will be carried out at verious places in station, if required or as directed by Engineer in charge :-

M&L for removing existing UNSV Top and S & F new Top made out of block board commercial 18/19 mm BWP grade duly covered with 22 gauge aluminium sheet all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing existing UNSV long Rail and S&F new long rail made out of square MS pipe 25 mm dia of 1.6 mm thick fix by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV short Rail and S&F new short rail made out of square MS pipe 25 mm dia of 1.6 mm thick fix by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV legs and S&F new legs made out of square MS pipe 25 mm dia of 1.6 mm thick fix by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV rubber shoe and S & F new hard rubber shoes all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the table applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Teapoy Verandah including following items refer Drg No (FD-208/ FD/E6/MAP/17), Work will be carried out at verious places in station, if required or as directed by Engineer in charge :-

M&L for removing existing UNSV legs and S&F new legs of existing shape and size as required duly welded to all the places all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV Top and S & F new Top made out of prelaminated particle board 18/19 mm exterior grade duly fixed with 4mm thick hard wood beading all round all as specified and shown on drawing or as directed by Engr-in-charge . .

M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the teapoy verandah applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Chair Verandah including following items refer Drg No (FD-19M, 256, FD/MAP-II/06), Work will be carried out at verious places in station, if required or as directed by Engineer in charge :-

Material & Labour for removing paints by cutting/scrubbing from chair verandah and contineous gas welding to the broken parts where reqd after preparing the entire frame repaint the chair with two coats of synthetic enamel paint white over a coat of red oxide all as specified and shown on drawing or as directed by Engr-in-charge .

Material & Labour for removing existing unserviceable cane from chair verandah and recane the chair (both seat & back) with 4 mm wide half round cane plastic of shah/premier make all as specified and shown on drawing No FD-19M or as directed by Engr-in-charge .

Material & Labour for removing existing unserviceable nylone newar from chair verandah and rewieving the chair (both seat & back) with 50mm wide 1st quality of nylone newar all as specified and shown on drawing No FD-256 or as directed by Engr-in-charge .

Material & Labour for removing existing unserviceable Seat & Back from chair verandah and refix the same with new PVC seat & back as shown in Drg. No. FD/MAP-II/06 complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing existing UNSV rubber shoe and S & F new hard rubber shoes all as specified and shown on drawing or as directed by Engr-in-charge .

Chair CB steel with Arms including following items refer Drg No (FD-75(M), Work will be carried out at verious places in station, if required or as directed by Engineer in charge :-

M&L for removing existing UNSV seat S&F new seat made of second class hardwood well seasoned duly caned with 2mm half round cane plastic and providing 4 nos flat iron strips of size 40mm x 25mm x 5mm thick to be welded with the frame all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV Back S&F new Back made of second class hardwood well seasoned duly caned with 2mm half round cane plastic all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV Arm rest and S&F new Arm rest made of second class hardwood well seasoned as per exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV PVC Caps S&F new PVC Caps of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the Chair CB Steel with Arms by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Chair CB steel without Arms including following items refer Drg No (FD-75(M), Work will be carried out at verious places in station, if required or as directed by Engineer in charge :-

M&L for removing existing UNSV seat S&F new seat made of second class hardwood well seasoned duly caned with 2mm half round cane plastic and providing 4 nos flat iron strips of size 40mm x 25mm x 5mm thick to be welded with the frame all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV Back S&F new Back made of second class hardwood well seasoned duly caned with 2mm half round cane plastic all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV PVC Caps S&F new PVC Caps of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the Chair CB Steel w/o Arms outer & inner portion by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Chair School PVC with hand board including following items refer Drg No (FD/E6/MAP/05), Work will be carried out at verious places in station, if required or as directed by Engineer in charge :-

M&L for removing existing UNSV writing pad top and providing new writing pad top made of 18mm thick prelaminated particle board exterior grade openable with pvc edging (hinged on RHS) screw to 25mm dia hollow steel pipe inserted in 20mm dia ms rod welded to frame (welding to be done where required ) all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV PVC Seat & Back and S&F new seat & back (Blow plast or equivalent) to be fixed with the chair all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing existing UNSV book rack and S&F the new book rack of chair school with hand board all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV PVC Caps S&F new PVC Caps of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the Chair School with hand board outer & inner portion by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Shoe Rack Steel including following items refer Drg No (FD/E6/MAP/02), Work will be carried out at verious places in station, if required or as directed by Engineer in charge :

M&L for removing existing UNSV shelves and S&F the new shelves of shoe rack steel all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV rubber shoes and S&F the new rubber shoes of shoe rack steel all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the shoe rack steel applying two coats of synthetic enamel black paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Rack steel 1830x760x1905mm including following items refer Drg No (FD-129), Work will be carried out at verious places in station, if required or as directed by Engineer in charge :-

M&L for removing existing UNSV shelves and S&F the new shelves of rack steel all as specified and shown on drawing or as directed by Engr-in-charge ..

M & L for removing existing UNSV angle and S&F new angle of exisiing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M & L for removing existing UNSV corner and S&F new corner of exisiing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M & L for removing existing UNSV nut & bolt and S&F new nut & bolt of exisiing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the rack steel 1830x760x1905mm outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

Rack steel 4/5/6 Tier including following items refer Drg No (FD-106(M), Work will be carried out at verious places in station, if required or as directed by Engineer in charge :-

M&L for removing existing UNSV shelves and S&F the new shelves of rack steel all as specified and shown on drawing or as directed by Engr-in-charge ..

M & L for removing existing UNSV angle and S&F new angle of exisiing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M & L for removing existing UNSV corner and S&F new corner of exisiing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M & L for removing existing UNSV nut & bolt and S&F new nut & bolt of exisiing shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the rack steel 4/5/6 tier outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

Schedule of Credit

M/S Nakul Chandra Samal

M/S KHAN ELECTRICAL