REPAIR TO SEWAGE LINE, SEPTIC TANKS, AREA DRAINAGE, FENCING AND REPAIRS TO OTHER RELATED WORKS IN AREA-I UNDER GE KAMPTEE.

Amount

Demolition of unreinforced cement concrete in ground floor & pavings not exc 15cm thick (below or above ground level) complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and directed.

M&L for crushed stone dust filling under floorings/ pavement spread and levelled in layers not exc 15cm thick complete including watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block colour glossy finished, rubber pressed, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block, colour glossy finished, rubber pressed any shape and size confirming to IS 15658-2006 of 80mm thickness M-35 Grade with grey cement and pigment complete all as specified and as directed.

M&L for chequered/ plain (or any approved design) cement concrete tiles colour glossy finished rubber pressed set jointed and pointed in neat cement slurry and pointed in coloured pigment over 20mm cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm broken stone or boulders deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for plain cement concrete in sub bases/ pavings type D2 1:4:8 (using 40mm graded stone aggregate) complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) in floor finish concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door/ frame etc complete all as specified and as directed.

M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'B' complete all as specified and as directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for brick with fly ash brick old size straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with fly ash brick, straight or curved on plan to any radius built in half brick thick wall built in CM 1:4 (Using old size brick) complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping including weathering throating and necessary formwork complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brickwork or on concrete surfaces in cement mortar (1:6) and finishing surfaces even & smooth without using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish off the premises complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 using 20mm stone aggregate as in landings, cover slabs, for manholes etc and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, plinth beams, fair finished surface all as specified and directed.

M&L for RCC 1:1 ½:3 (using 20mm graded stone aggregate) (nominal mix) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc. fair finished surface complete all as specified and directed.

M&L for RCC 1:1 ½:3 (using 20mm graded stone aggregate) (nominal mix) for column, pillars, piers, posts and struts for supporting of beam etc complete all as specified and directed.

M&L for formwork to sides and soffits/ arches of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, roof slabs, floor slabs, landings and similar work etc also splays between floors and beams, etc complete all as specified and directed.

M&L for RCC 1:1 ½:3 (using 20mm graded stone aggregate) (nominal mix) for floor/ grade/ roof slabs supported or not on walls, roof beams and columns, landings, balconies, canopies, deck slabs, chajja and in shelves and the like etc complete all as specified and directed.

M&L for formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings, arches and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for RCC 1:1 ½:3 (using 20mm graded stone aggregate) (nominal mix) for domes, vaults, shell roofs, arch ribs and folded plates and the like etc complete all as specified and directed.

M&L for RCC M-40 modular, weather proof, designer Precast Compound Wall, manufactured with Reinforced concrete using vibro compaction method, Post and Panel System, Precast Concrete Panel, Size: 2000 X 300 X 50-80 mm thick, Reinforcement: 3 No. – 8 mm ϕ bars tied with 8 mm stirrups @ 250 c/c, Finish: Stone / smooth, Concrete: M-40 Grade (GFRC), Precast Concrete Post (H Type), Size: 2500 X 140 X 140 mm, reinforcement: 4 No. – 8 mm ϕ bars tied with 8 mm stirrups @ 200 c/c, Concrete: M-40 Grade (GFRC) including necessary excavation for post holes and PCC 1:3:6 (using 20mm graded stone aggregate), painting as required colour etc complete all as specified and directed. Note:- Cost of reinforcement and demolition of existing fencing/ wall included in the rates given. Height of wall above GL 2.1m or as directed by EIC.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in hard/ dense soil, complete all as specified and as directed.

M&L for cement concrete type B-2, 1:2:4 as in foundation, filling and mass concrete (Using 40mm graded stone aggregate) complete all as specified and directed.

M&L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F framed work as in doors or gates of angle/ tubular or other section with gusset plates, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) hanging; also fastening and fixing complete Fe 410 -W(Gde-E- 250) quality A complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing/ blusters/ chain etc made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed.

S&F MS screw bolts of dia 5-10 mm (machine made) with hexagonal or square at one end and screwed with other end or screwed both ends length of bolt not exc 5cm long complete all as specified and directed.

S&F 10mm dia and over round bars in chain link fencing complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and as directed.

M&L for two coats of white wash on newly plastered surfaces on wall complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site of work complete all as specified and directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5m in depth and getting out soft/ loose soil complete all as specified and directed.

All as per item No 45 above but depth exceeding 1.5m and not exc 3.0m depth complete all as specified and directed.

Excavation over areas not exc 1.50m deep and getting out in soft/loose soil complete all as specified and directed.

All as per item No 47 above but exc 1.5m depth and not exc 3m depth complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/ dense soil complete all as specified and directed.

Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 200mm internal dia of pipe complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or RCC Pipes) of any description and size set in cement mortar complete all as specified and directed.

M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregated) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for any dia of pipes complete all as specified and directed.

M&L for SGSW (Grade 'A') drain pipes confirming to IS size 150mm laid in trenches and jointed in CM 1:2 complete all as specified and directed.

M&L for reinforced concrete pipes, class NP2, laid and jointed complete with collar for the 200mm internal dia of pipes complete all as specified and directed.

All as per item No 55 above but 300mm dia complete all as specified and directed.

All as per item No 55 above but 450mm dia complete all as specified and directed.

All as per item No 55 above but 600mm dia complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping benching, bed plates and the similar including, weathering, slightly rounded or chamfered edges and throating complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Taking down of PVC, pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F in repair PVC (SWR) pipes 150mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75mm dia complete all as specified and directed.

S&F in repair PVC (SWR) bends with access door any radius, 110mm dia complete all as specified and directed.

S&F in repair PVC (SWR) bends with access door any radius, 75mm dia complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, double (double Y) equal or unequal with access door, 110mm dia complete all as specified and directed.

S&F stack clamp made out of 50 x 5mm flat iron for 75mm dia of pipe complete all as specified and directed.

S&F stack clamp made out of 50 x 5mm flat iron for 100mm dia of pipe complete all as specified and directed.

S&F in repairs PVC (SWR) nahani trap 75mm dia with grating including jointing with solvent cement complete all as specified and directed.

Demolition of reed lathing, single or double including battens and plaster or chicken wire lathing, RCC jali complete all as specified and directed.

S&F precast cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) louvers and jallies 35mm thick (measured solid) set in CM 1:4 including all mouldings but excluding frame and fixed complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.1,11,815.00]

M/s B S Jain

M/s T.S.JOHAR

Vishwakarma Engineering Works

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL

chronicle enterprises

Bidder Name

Vishwakarma Engineering Works

chronicle enterprises

SHUB CONSTRUTION

M/s B S Jain

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL

M/s T.S.JOHAR