Retender - Operation and Maintenance Gap Filling Fund 2023-2024 Renovation of Community Hall at Ward 13 Valluvar Colony in Vadugapatti Town Panchayat, Theni District

Amount

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. TNSS No: 61 V, VI (S4) 3

Supply and Fixing of MS Doors, window and ventilator with Necessay Accessories and Locking Arrangements including cost and conveyance of all materials and labour charges etc., complete as per standard specification

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) TNSS No: 39A

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers TNSS No: 44 H V, VI (S5A) VII, 3

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A

Painting with two coats of Approved colour of best quality synthetic enamel paint, painting over new iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers. (New Iron Surface).TNBP No:66&66-A

Wiring with 2x2.5 sqm PVC unsheathed SC Aunsheathed cable of 650V crede ing switcbe PVC rigid pipe including all cost and conveyance of all materials to site and all labour charges for conceiled light point.SD-26

Wiring with 2x2.5 sqmm PVC unsheathed SC Alu cable of 650V grade in suitable OVC accessories and with TW Switch box wire connection of 14 SWGTC wire for PVC plugh point SD-38