Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.9 LAccepted-AOC 93 4 16A BLOCK NO 3 JAWAHAR CHOWK PACHMARHI MP 461881 | PACHMARHI | HOSHANGABAD | MADHYA PRADESH | 461881 | L1 | Accepted-AOC L1 | |
| 2 | L2₹7.5 L+₹60,321.15 (8.76%)Rejected-Finance NEAR BUS STAND PACHMARHI MP PIN 461881 | PACHMARHI | HOSHANGABAD | MADHYA PRADESH | 461881 | L2 | Rejected-Finance Not Admitted | |
| 3 | L3₹7.5 L+₹61,219.25 (8.89%)Rejected-Finance | L3 | Rejected-Finance Not Admitted | |
| 4 | L4₹8.5 L+₹1.6 L (23.3%)Rejected-Finance | L4 | Rejected-Finance Not Admitted |
Tender Value
Refer Docs
EMD Value
₹18,400
Closing Date
20 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE Indpt Pachmarhi
AGE Indpt Pachmarhi Dist- Hoshangabad (MP)-461881
PROVN OF CERTAIN MINOR WORKS AT AEC RECORDS, MH AND CI DET CCIB AT AEC TRG COLLEGE AND CENTRE PACHMARHI
2022_MES_514263_3
CA No. AGE(I)/PACH/ of 2022-23(8462/E8)
Open Tender
Civil Works
Item Rate
180 days
Pachmarhi MP
Class E Category a(i)
8 documents required · 8 mandatory
₹500
AGE Indpt Pachmarhi
₹18,400
Yes
9 Jul 2022
6 Jun 2022
22 Jun 2022
6 Jun 2022
20 Jun 2022
7 Jun 2022
60 days
Amount
Surface excavation exc 30cm deep and averaging 15 cm deep and getting out soft/loose soil
M&L Hardcore of brocken stone or boulder gauge n exc 63mm, deposited, sprade and levelled in layers nexc 15 cm thick watered and rammed to true surface
M&L for providing 100 mm thick cement concrete 1:2:4 type B-2 (USING 40mm graded aggregate) including necessary form work etc complete all as specified and directed
M&L forming construction joint 30mm deep x 10mm wide filled with sealing compound grade B.
M&L for 50mm thick precast cement concrete 1:2:4 type B-0 (using 12.5mm and below stone aggregate) in coping, kerb stone factory made as approved by GE with plain fair faces including champhering weathering etc complete with joint to match in CM 1:6 all as specified and as directed
Excavating in trenches exc 1.5m wide and n.exc 1.5m in depth and gatting out soft /loose soil.
M/L cement concrete Type D 2 1:4:8 (40MM graded aggregate) in foundation, filling, mass concrete.
M&L for modular brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 all specified and as directed by Engineer-in-Charge
M&L for rendering 15mm thick on fair face of bricks or concrete surface in CM 1:6
Preparation of new surface of wall and applying two coast of cement based paint over a coat of primer
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in loose /soft soil.
Removing excavated soil n.exc 50 m and deposition where directed at a level n.exc 1.5m above the starting points
Excavating in post holes each nexc 0.5cum getting out in soft /loose soil,ramming earth filling or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surfaces soil to a distance n.exc 50m and making good surfaces
M/L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation for posts
S&F for Steel work in tubular trusses (framed works as in purlin, rafters, coulmn square/rectangular, round or angle section) including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St 240 complete all as specified and as directed.
S&F Hand rails, half round or other stock section or core for woodenbhand-rail strainght portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concret and screwing etc wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron filles (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165
S&F Mild steel screw bolts 10mm dia (machine made) 100 mm long with hexagonal or squareheads at one end and screwed the other, orscrewed both ends, each screwed end to be fitted with washers and one hexagonal or square unt, n exc 5cm long complete all as specified
M&L Pre-painted. Galvatume aluminium zinc coating Gl based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as speified and as directed by Engineer-in Charge.
M&L painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation, priming with zinc chromate and two coats of synthetic enamel paint complete.
M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 (USING 40mm graded aggregate) including necessary form work etc complete all as specified and directed
M&L for Chequered cement concrete tiles 20cm x 20 cm x 25 mm thick, set jointed and pointetd in neat cement slurry in floors
M&L for 15mm thick screed bed or bedding layer of morter for laying floor finishes CM 1:6
M&L PCC 1:2::4 type B1 using 20mm graded aggregate as in copings/ sides of chequered tiles
M/L Cement concrete Type D 2 1;4;8 (40mm graded aggregate) in foundation,filing, Mass concrete
Providing,cement concrete coping/kerb type B1, 1:2:4 using 20mm graded stone aggregate complete all as directed
Preparation of new surface of wall and applying two coats of white wash complete
S&F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensiles strength of 550 Mpa as in ridge/roof covering/cladding towall, fixed with self tapping
Supply,laying and testing cable XLPE insulated screened PVC bedded, galvanized seel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core.
S&F LED 8 watt bamboo bollard IP65, 1.0 M with energy saving, aluminium landscape luminaire for diffused lightening with high power LED,including fixing arrangement on constructing PCC block of size 200mm X 200mm X 450mm complete all as specified and directed. Make: Havells, BambooBL8WLED857 SSYMTOPCM(1.0M) or equvalent as approved.
S&F junction box with thermoplastic,IP 65 cable junction box with metric knocouts on all sides for cable entry size: 200X160X98 mm as per Hensel cat ref no. 9250 or equivalent in Eaton or Rittal or secure duly fitted with followings:- Make: Hensel/Sintex One number DIN Rail(35mm) Four numbers ELMEX or equivalent make connector of 10 sqmm One number ELMEX or equivalent make end plate Two number ELMEX or equivalent make and clamps One number MVB SP 0.50 amp, 10KA, 'C' series of Legrand make or equivalent in Hanger or Schneider as approved
Supplying and fixing 40mm bore, ISI marked steel tubes light grade galvanised with all fittings used for cable / GI wire protection complete. Make: Jindal/Prakash/Tata
M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.
Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 complete.
SUBIR KUMAR ROY
M/S Ramesh Chandra Agrawal
GHASI RAM SAHU
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .