INCREASING CAPACITY OF TRANSFORMER AND OTHER WORK IN BUSINESS PLAN UNDER EDD-I, BULANDSHAHR.

Amount

Carriage of fallowings from ESC BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

Carriage new 10 KVA Transformar.

Carriage new 25 KVA Transformer

Carriage new 63 KVA Transformer

Carriage new 100 KVA Transformer

Carriage new 250 KVA Transformer

Carriage PCC Pole for Distribution Transformer

Carriage LT lead 240/400/630 sqmm

Carriage LT ABC 3x50/95/120 sq.mm.

Carriage 11 KV HT fuse set

Carriage ACSR Dog conductor

Carriage ACSR Weasal conductor

33 KV line spare cable 3X300 sqmm

LT PVC XLPE Cable 1X240 /400 /630 sqmm

33 KV V- Type x arm

Stay Set Complete with wire

11 KV V-Type Cross Arm

Earthing Rod Complete

The following meterial Erection & Fixing as per RESPO manual. It including the cost of labour, T&P, Carrier etc. required for proper completion of work.

Installation new 10 KVA Transformar.

Installation new 25 KVA Transformer

Installation new 63 KVA Transformer

Installation new 100 KVA Transformer

Installation new 250 KVA Transformer

Installation PCC Pole for Distribution Transformer

Installation LT lead 240/400/630 sqmm

Installation 11 KV HT fuse set

Carriage LT ABC 3x50/95/120 sq.mm.

Laying ACSR Dog conductor

Laying ACSR Weasal conductor

Laying 33 KV line spare cable 3X300 sqmm

Laying of LT PVC XLPE Cable 1X240 /400 /630 sqmm

Fixing of Aluminum Bus Bar & Crimping Lug

Fixing of LT ACB 630 Amp.

33 KV V- Type x arm

Stay Set Complete with wire

11 KV V-Type Cross Arm

Earthing Rod Complete

Providing and fixing of the following material by the Contractor as per UPPCL/RESPO Rules.

Guarding M.S. Angle 65x65x6mm)/1.6 meter

Distribution Box 3 phase

MS Channel (Dropper) 100x50x2028

MS Angle 75x75x6x2028 mm

M.S. Top Channel (125x65x2240 mm)

MS T-off Channel 125x65x1300 mm

F-Clamp

11 KV Cross Arm Holding Clamp

33 KV Cross arm Holding clamp

Nut & Bolt with Washers all sizes.

Danger Board with Clamp

Grouting of Pole

Stone Pad

Clamps for D.B. (40x6 mm)

Clamps for 10 KVA T/F (75x8 mm)

Clamp for D/P with Nut & Bolt

DEAD END CLAMPS WITH I-HOOK (INSULATED)

LT PIERCING CONNECTOR

SUSPENSION CLAMPS WITH I-HOOK (INSULATED)

Clamp for Guarding MS Angle

Fixing of Aluminum Bus Bar & Crimping Lug

Fixing of LT ACB 630 Amp.

Providing & Fixing of LT ACB Plinth

The followings matarial dismantalling & Carriage from site to ESC BSR including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

ACSR Weasal/Rabbit Conductor (Scrap) -

G.I. Wire (Scrap) -

XLPE/AB Cable (Scarap / Old And Damaged)

PCC 11 MTR LONG (Iron scrap)

1. Nut, Bolt, Clamps and others necessary items should be provided by contractor. 2. T and P should be and other necessary machinery should be provided by contractor. 3. All the MS Items must be Galvanized. All work will be done as per UPPCL/RESPO Rules and these work will be inspected by TPIA or any departmental authority.

NEHA ENTERPRISES