Development of Jina Kanchi Jain Math Temple in Melchithamur at Villupuram District.

Earthwork excavation for foundation in sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and partially with stiff clay, stiff black cotton, murram, gravel including refiiling sides of the foundation.

Charges for providing drill holes of following diameter for pile foundation upto a depth of 6m from ground level with necessary machinary, tool and plants etc including flushing removing the crushed earth, bailing out of water etc as directed by the department officer including hire charges for all equipment, labour charges transportation etc complete.complying with standard specification complying with standard specification

Supplying and eraction of RCC Hume pipe of following diameter up to a depth of 6m as casuing to the pile foundation including cost and convenyance of all material labour etc complete complete with standard specification

Supplying and filling in foundation and basement with M - sand in layers of not more than 15cm thick well watered, rammed and consolidated etc., complete as per standard specification…

Plain Cement Concrete 1:5:10 (One cement, Five M.sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification.

Supplying and erecting steel centering including necessary supportsfor plane surfaces for Reinforced Cement Concrete works such ascolumn footings, column pedestals, plinth beams, grade beams,staircase steps, etc.., requiring nominal strutting using mildsteel sheets of size 90cm x 60cm and 10 BG stiffened with weldedmild steel angles of size 25mm x 25mm x 3 mm for boarding, laidover silver oak joists of size 10cm x 6.5cm spaced at about 75cmcentre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation.

Supplying and erecting centering for sides and soffits includingnecessary supports and strutting upto 3.29 M height for plane surfacesas in all floors with all cross bracings using Mild Steelsheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steelangle of size 25mm x 25mm x 3 mm for boarding laid over silver oakjoists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centreand supported by casurina props of 10cm to 13 cm dia spaced at notmore than 75 cm centre to centre etc. complete complying with thestandard specificaiton.

Plain Cement Concrete 1:2:4 (One cement Two sand and ten broken Machine crushed stone jelly) using HBG Machine crushed stone jelly of size 20mm gauge for founding and basement including de-watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers. SI No 127. TNBP No. 28

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 Kg/m3 and maximum water cement ratio of 0.55, including admixture ( plasticiser / Super plasticiser) in recommended proportions as per IS:0103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 Kg of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 Kg of 10-12mm machine crushed stone jelly and with about(4.79cu.m) 7670Kg of sand but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc, and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra, etc, complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards.

For Pile Foundation & grade beam

Super structure

Supplying, fabricating and placing in position of TMT rods for all RCC works including cost of steel binding wire and labour charges for fabrication but excluding the cost of concrete and centering as per standard specification.

Supplying , fabricating and fixing of MS tubular section of following sizes including cost of labours, materials and transport charges etc.., complete.

Supply and fixing with best quality galvalume sheet (JSW) of 0.47 mm thick including cost of self taping screws and cutting the sheets to the required shapes if found necessary during execution including cost and conveyance of materials and labours etc, complete complying as directed by the corporational officer.

Supply and fixing of ridige sheet of approved make with necessary self tapping screws ext… complete

Brickwork in Cement Mortar 1:5 (One cement and five sand) using II Class Ground moulded chamber burnt bricks of size 9”x4 ½” x 3” in foundation and basement including curing etc. complete complying with standard specification

Solid block work in Cement Mortar 1:5 (One cement and five sand) using solid block of size 16"x8"x8" in foundation and basement including curing etc. complete complying with standard specification.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with cement mortar 1:5,(One cement, and five M.sand) 12mm thick including curing, cost and conveyance of all materials complying with standard specification.

Plastering with cement mortar 1:3,(One cement, and Three M.sand) 12mm thick including curing, cost and conveyance of all materials complying with standard specification.

Painting the interior walls with two coats of interior Emulsion paint over the one coat of primer after cleaning the surface etc., complete. as per standered specification.

Painting the exterior walls with two coats of Exterior Emulsion paint after cleaning the surface over old wall surfaces etc., complete. as per standered specification.

Flooring with double charged vitrified tiles of approved quality, colour and size of 600x600x8mm over a base layer of cement mortar 1:3, 20mm thick including pointing the joints with same colour cement cost and conveyance of all materials complying with standard specification...

Supply and fixing UPVC Window of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with G.I. 1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter. The sutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Raditations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging stroms and should have key lockable action. security protective hinges, strong locking systems and as per size for arresting noise and energy loss. the connecting mechanism between sash and outer frme that enables opening of the window. the window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. the window should be got approved from the Executive Engineer before use on work.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supplying and Filling Red Soil for Land scaping.

Supplying and laying Korean and Mexican Grass.

Supplying and planting five different types of plants and trees.

Supply, Erection of 8m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. this munting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCCfoundation. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO- 1461 with thickness of 65 Micron and supply and fixing of 80 Watts LED street light fitting with IP65 rating tec., complete

Providing and fixing of Digitally printed Retro-reflectorized sign board made out of cube corner micro prismatic gradesheeting of Type XI standards of IRC 67 - 2022 and ASTM D 4956 - 09 specification, digitally printed using Latex Printer for traffic color images/logos/text and laminated with clear Ultraviolet rays resistanceelctro-cuttable film and applied to properly prepared sign -substrates, fixed over 2mm thick Aluminium sheet or 4mm Aluminium composite material with back supporting frame of size 50mm x 50mm x 6mm MS angle and supported on 2 numbers of 150 NB (Nominal Bore) MS pipes of 4.50mm thick with an overall height covering from top of the board to the bottom of foundation. The clear height of the posts from thr ground level to the bottom of the sign board shall not be less than 2.10m and the depth below ground level shall not be less than 1.10m. The sign post should be painted as per IRC 67-2022 and firmly fixed to the ground by means of properly designed foundation with cement concrete M15 grade of size 45cm x 45cm x 110cm including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading charges and fixing in position for satisfactory completion of the work as directed by the Engineer-in-Charge etc., The micro prismatic grade sheeting of Type XI should have minimum co-efficient of Retro-reflection values as per Table 6.9 of IRC 67-2022. The retro-reflective sheeting shall be covered under 10 years warranty issued for field performance as per IRC 67-2022 and a certified copy of 3 years Indian outdoor exposure report shall be obtained and submitted for evaluation during the tender submission. The warranty shall be inclusive of digitally printed images/logos/text/legends and their bonding to the retro-reflective sheeting

Signage Direction Board (1.80m X 1.20m)

Information Board (3.00m X 2.40m )

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point.

Wiring with 2 x 4 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion.

Supply and fixing of 12 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4 P MCB switch as incoming and 4 nos 32 A 3p MCB 24 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.

Supply and fixing of 18W LED square type Recessed fitting with LED on false Ceiling/Surface with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting etc., Complete.

Supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete with 2 module 100W fan step regulator (Lower end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc., complete.

Supply and laying of 3½ x 95 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete

Supply and frxing of brass cable gland for following 3½ x 95 sq.mm PVC armoured LTUG cable with earth connectionetc., complete.

Supply and providing cable end termination for 3½ x 95 sqmm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessarymasonry work and with 38mm RCC cover slab for the brick masonry. etc., complete.

Supply and run of 1 of No.8 SWG GI wire for earth connection etc. Complete.

Supply and fixng of TNEB meter board suitable for 3phase 100A service connection made up of suitable angle iron frame work of size 2feetx1-1/2feet using angle iron of size1-1/2"x1 1/2"x1/4" rigidly fixed on wall covered with hylem sheet of size 2feetx1-1/2feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos.100A fuse units (500V), 1No.neutrallink, copper earth flat of size1"x1/4" with interconnection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete.

Supply and fixing of 1.5 Ton Split Air conditioner having 3 star rating (both indoor & outdoor unit) with 3 mtr copper pipe and control wire including remote unit. The rate inclusive of material, labour and transportation etc., complete.

Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay.

Supply and fixing of 5/8" and 3/8" copper pipe (Extra beyond 3 meters supplied with AC unit)

Supply and providing of 1.5sqmm 3 core copper flexible single cable.

Supply and fixing of water drain pipe line (1" PVC pipe).

Supply and providing of pipeline nitrle rubber insulation for refrigerant and drain pipe line.

Supply and fixing of MS stand for fixing outdoor unit

GST at 18%