Ranipet DT Panapakkam TP 15th FC 2023-2024 2nd Instalment (Un Tied)

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Plain Cement Concrete 1:4:8 using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Plain Cement Concrete 1:3:6 Mix (one Part of cement, three Part of M- Sand and six Part of aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in iniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH

Providing and laying of 63mm thick Interlocking Paver Block in uniform shape of approved make to be laid in flurring bond pattern with 150mm thick quarry rubbish cushion below the uniform shape of approved non-skitting surface in the top and the rates including levelling the base, preparation of pavers as sub base and quarry rubbish cushion etc., complete complying with standard specification.

Supply and planting Boarder plant 15cm intervels zig zag wise Includung all labour chargesetc completed

Four Seated see - Saw Manufacturing, supply and erection of Fourt seated see - saw of size 2.10 Mt long and 1.5Mt width supporting with 35mm dia of C.R. pipe of "B" class thickness and 4 Nos. of seat arrangements, one safety back rest up & down movement will controlled by heavy duty bearing mounting including one coat of anti rust epoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp etc., complete

FLP Double Side Manufacturing, supply and erection of FRP Double slide of sliding lengh 2.1 Heigh 1.82m & width 508 mm made of 63.5mm, 55mm, 35mm, 25mm B Class CR pipe, the sliding area made by S.S sheet 2 Nos. including one coat of anti rust epoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp etc., complete

Four SS Seated Swing Manufacturing, supply and ereciton of fourt seated seated swing made of 50mm, 63.50mm S.S. Pipe. Dimensions Hight 3.048 meter, Length 6.096 meters. Tested Bearing supported molded chains with attractive colors. Seating arrangments made by GI sheet including one coat of anit rust expoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp including one coat of anti rust epoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp etc., completed

Jungle gym - Feb of 1" GI Pipe 4 length X 4' wide and 7' height etc., complete

Granite Stone Sitting Bench (3 seater)

Supply and fixing of 6.0Mts swaged welded Steel Tubular Pole (Single Arm) with a length 1.25m and thickness of pole suitable curved at the top with the following size etc,4" dia MS Pipe 4.5mm thick, 2.50m length (Bottom) 3" dia MS pipe 4mm thick 2.0m length ( Middle) 2.5" dia MS Pipe 3mm thick 1.5m length (top) a specially protected stainless steel top layer, acrylic diffuser, translucent top, bottom clear with built in control box with MS base plate and foundation hardwares. The rate inclusive of all charges such as earth work, sand filling, PCC 1:4:8 for Footings and bolt nuts etc, complete as per standard specification PNo 148 sl No 15(1c)

Supply and fixing of30W LED White Street Light Fittings with casting Water proof doom and low voltage power savings with long time high solution luminance, IP66 Led Safe® optical compartment, a separate IP66 control gear compartment, an extruded aluminium painted housing, a toughened glass protector,permaently sealed with a robotically dispensed silicone sealant, closed at one end by an end cover and the other end by a frame and door assembly (to access control gear) both made of injection moulded polycarbonate, a removable control gear plate, safety plug and socket system, high pressure die cast aluminium painted mounting spigot suitable for horizontal mounting (Ø32-42mm) with tilt flexibility of ± 10 degrees, with lensoFlex2® technology,PMMA lenses with wide photometry for increased pole spacing,50,000 hours =L70,Ta = 55º,surge protection of 10Kv ( in differential and common mode),Power factor ≥0.90,colour rendering index≥65 and neutral white light (4,100ºK.) with necessary clamps, brackets and accessories etc complete PNo 148 sl No 17(1a)

4sqmm 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CROSS LINKED POLY ETHYLENE INSULATED PVC SHEATHED CABLES CONFORMING TO IS 7098 (PART I)/1988 WITH ISI MARKING

THENNARASU SUDHAKAR (BID ID -1084993)