PROVN OF CENTRAL / INDEPENDENT COOLING SYSTEM IN VARIOUS BLDGS OF AMC RECORDS AT AMC C AND C, PROVN OF 01 X TOILETS FOR NURSING OFFR AT BLDG NO 37 (PSY WD) OF CH (CC) AND PROVN OF INTERLOCKING PAVER BLOCK AT GRH GROUND OF SOI UNDER GE E/M LUCKNOW

Supply, Installation, Testing and commissioning of Industrial Ducting Cooler, Venti-Cool 25U, Package type Air cooling unit, with Top / Down Discharge, Nominal air delivery -25000 cubic metre per hour, Cooling area up to 1600 Sqft, Input power supply 415 V, 50 Hz, 3Ph), Motor power 1.5 kw, Air outlet dimensions 670 mm x 670 mm (approx.), Body material UV Stabilized Engineering Plastic, Tank capacity 70 / 40 Litre, Air moving device 620 mm sweep Fan, Cooling media 100 mm thick Honeycomb pads with auto clean function, Cooling surface area of pad 2.6 sqm(approx.), Minimum cooling efficiency 80%, single Number of speeds suitable for Duct length up to 24 metre, Air Outlet Grills up 12 Nos of size 250 mm X 250 mm, Optimized motor & fan to delivered low noise power full airflow, Automatic float valves, High qulaity air pre filter to protect the cooling pads with dust & pollutions complete all as directed by EIC.

Note for Item No 1 & 2 :- Unit rate quoted by the contractor shall be deem to include for all minor items / constructional details which are not specifically mentioned in the description but are essential for the execution of work in a workman like manner and sound engineering practice. In case of difference of opinion between the contractor and the AGE, as to whether or not certain item of work constitutes “Minor Construction Details “which are deemed to have been included in the contractor’s quoted unit rate, the decision of the Accepting Officer shall be final, conclusive and binding

Supply, assembly and erection duct fabricated with 22 Gauge thick plain mild steel galvanised sheet, with C & SS rectangular / square duct made out of 'L' shaped hollow profile, duly factory boxed, including all accessories such as Corner, Cleat, Carriage bolt, Gasket and appropriate sealant on longitudinal joints etc complete all as directed by EIC.

Supply & fix Acoustic duct insulation, 25 mm thick, sealing of all longitudinal joints and circular overlaps with Aluminium foil tape 50 mm wide, to make the insulation leakproof at inside the ducting after applying 2 coats of cold setting rubbed based adhesive (CPRX Compound) complete all as directed by EIC.

Material & Labour for concealed sub main wiring with 2 run single core multistranded copper conductor cable, of size 6.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke, drawn through and including heavy duty rigid PVC conduit not less than 25 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling, complete. Note: (i) 2 Runs of main cable and one run earth wire with conduit will be measured as one Unit for payment.

Material & Laying, jointing and testing of LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 70 sqmm cross sectional area, 3.5 core, complete all as specified laid in trenches / laid under floor or fixed naked with walls / on poles/ in ducts / in GI pipes etc. with and including MS Clamps, nuts, bolts, washers complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, / laying of pipe / cable etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft loose soil complete.

Supply & fix cross arms, bracing, supports clamps and back plated fabricated from structural steel section incl nuts, bolts, washer, welding, bending cold or hot drilling holes for bolts in any shape or size (staging/ stand for PVC tank and air cooling units) as per site requirement and inclusive one red oxide primer coat and one finishing coat of black paint, complete all as specified and directed by EIC. Note :- Rate for PCC work for fixation of stand/ staging as per site requirement directed by EIC are include in this item

Supply, laying & fixing CPVC pipe SDR 11, size in 25 mm outer dia including all necessary fittings such as elbows, tees, flanges, Union, shorts pieces, disminishing pieces, caps & plugs on floor/ wall/ underground with proper clip/ clamp all as directed. Note :- M&L for leak proof joint in existing pipe line, qty of joint as per site requirement are include in this item.

Supply, laying & fixing CPVC pipe SDR 11, size in 20 mm outer dia including all necessary fittings such as elbows, tees, flanges, Union, shorts pieces, disminishing pieces, caps & plugs on floor/ wall/ underground with proper clip/ clamp all as directed. Note :- M&L for leak proof joint in existing pipe line, qty of joint as per site requirement are include in this item.

M&L for RCC 1:1.5:3 type A-1 using, using 20 mm graded stone aggregate as in lintel, lintel band, cill, beam & similar works complete all as specified and directed..

M&L for RCC 1:1.5:3 type A-1 using, using 20 mm graded stone aggregate as in slab complete all as specified and directed.

M&L for steel reinforcement of TMT bars (Fe-500 Grade) 10 mm dia and over cut to length and bent to shape required including cranking bending spirally, hooking end and binding with mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips all as specified and directed.

M&L for steel reinforcement of TMT bars (Fe-500 Grade) 8 mm dia, cut to length and bent to shape required including cranking bending spirally, hooking end and binding with mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips all as specified and directed.

M&L for steel reinforcement of TMT bars (Fe-500 Grade) not exc 8 mm dia and over as in stirrups cut to length and bent to shape required including cranking bending spirally for hOoping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.

Supply only integral water proofing compound

M&L for Sand filling under floors or in plinth including watering and consolidation complete all as psecified

M&L for Cutting into existing manholes for connecting new drains, making good to pipe internal dia of pipe 150 mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats exterior emulsion weather coat paint of make Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac) over one coat primer with 2 mm thick cement base wall care putty complete all as specified and directed.

Removing excavated soil exc 1.5 km but n.exc.5 km and deposited where directed at level not exceeding 1.50 m from the starting point all as specified.

Surface execavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft loose soil complete all as specified and directed.