SPL REPAIR TO BLDG NO 271 (INF HOUSE), T-1, T-3, T-33, T-34, T-36 AND PROVN OF HEAVY DUTY SOLAR WATER HEATER TUBULAR TYPE AT ITARANA CANTT ALWAR

Amount

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, beded and pointed in any mortar including removing the dismantled material complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) including floor finishes such as tiles etc and removing the domolisd material out side of defence land complete all as specified and directed.

M&L 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as under floor tiles finished the surface even and rough complete all as specified and directed.

M&L 18-22mm thick katni marble stone area of each stone exc 1 sqm but n.exc 2 sqm each machine cut, bedded jointed and pointed with white/matching colour cement slurry including cutting and polishing, with as in floors, white or coloured background and coloured veins (background and veins colour as approved by GE), with and including 20mm thick screed bed in cement sand 1:4 complete all as specified and directed.

M&L 18-22mm thick marble stone (square/rectangular), polished, coloured on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of stones over with and including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed.

M&L coloured non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc, laid over and including 15 mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L coloured joint free non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L glazed ceramic coloured tiles (1st quality) in vertical surface 450mm x 300mm x 7-8mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in Cement & Sand Mortar 1:4 complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 20mm complete all as directed.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc) bore of pipe 15mm complete all as directed.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc) bore of pipe 20mm complete all as directed.

S&F 15mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

S&F 20mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good, cutting not exc 10cm girth complete as specified and directed.

S&F in repair vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440mm, white with integral foot rest and 'P' or 'S' trap, including provision of Cement concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications as specified and directed.

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float, handle including Flush Pipe of polyethylene of low or high density or PVC 32 mm dia for low level cisterns and brackets after taking down old cistern all as specified and as directed.

S&F in repair vitreous china wash basin white of size 550x400 mm with padestal stand including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair Stop valves/angle cock bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make : Jaquar Cat part No OPP-15053PM or equivalent

S&F in repair 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed. Make : Jaquar Cat part No OPP-15083KPM or equivalent

S&F in repair bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Jaquar Cat part No OPP-15037PM or equivalent.

S&F in repair fancy type center hole basin mixer without popup waste system but including plain waste coupling 32 mm size with aerator complete cast copper alloy, chromium plated, scrwed down high pressure, with long scrwed shanks & fly nuts scrwed for iron pipes of 15mm bore complete all as specified & directed. Make : Jaquar Cat part No OPP-15011BPM or Cera, Johnson

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair Brass chromium plated square rain shower of size 150mm x 150mm fixed to 15mm bore pipe all as directed. Make : Jaquar Cat part No 276016 or equivalent.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed to wall complete all as specified and directed.

S&F 150mm drizzle anti cockroach trap 150mm x 150mm square stainless steel with chrome finish grating zali complete all as directed.

S&F PVC (SWR) 75mm dia floor trap jointing with solvent cement.

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with Holder bat clamps of GI flat iron 25x3 mm all as specified and directed.

S&F PVC (SWR) bends 110mm dia any radius.

S&F PVC (SWR) junction single(Single T) equal or unequal with access door110mm dia.

S&F PVC(SWR) Vent cowl 110mm dia.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with Holder bat clamps of GI flat iron 25x3 mm all as specified and directed.

S&F PVC (SWR) bends 75mm dia any radius.

S&F PVC (SWR) junction single(Single T) equal or unequal 75mm dia.

S&F 110mm PVC (SWR) WC connector bent type all as specified and as directed.

Dismantling AC Pipe/ PVC pipes 110mm/ 75 mm dia.

Disconnecting existing tanks of capacity 500 / 1000 Litres setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position all as specified and directed.

S&F in repair 20mm bore gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repair Jet spray chromium plated brass for EWC with & including PVC connection 900 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.

S&F in repair health faucet, brass chromium plated for EWC with & including PVC connection 1m long suitable for 15 bore GI pipe with PTMT nut & nipple complete all as specified and directed. Make : Jaquar cat part No ALD CHR 565 or equivalent.

S&F in repair mirror cabinet PVC frame of size 400mm x 500mm fixed to wall with rawl plug & stainless steel suitable size screws complete all as specified and direceted. Make : Prayag Cat No 554 or equivalent as approved by GE.

S&F in repair wall mixer chromium plated (3 in 1) with arrangement for both telephonic shower and overhead shower with 220 mm max long bend pipe with hand shower of size 100 x 55 mm with 130 mm long arm & 1.2 m house pipe. Make : Jaquar cat part No SOL-6217.

S&F in repair glass corner shelf (Cat Part No T6010A1 of make Parryware or equivalent of Jaquar/Marc) complete all as specified & as directed.

S&F in repair vitreous China wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre cap with lid, necessary fittings complete as specified & directed. Make : Jaquar Cat Part No LYS-WHT-38851S300UFSMN or equivalent.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n.exc 4.00 Sqm each.

Taking down Chowkhats or frame with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each.

Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm each.

S&F mild steel framed work using angle iron, flat iron, round bars as in security doors/gates with end of bars shouldered and or rivetted or forged into spikes, framed guard bars barred into iron doors, walkways railing framework amd similler work confiming to Fe 290, GDE E-165 all as specified and directed.

S&F factory made solid wooden HDF moulded door shutter 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 3mm thick moulded door facing sheet on front face & 3 mm thick plain colour door facing sheet on back face, with raised high density boiling waterproof fiber board skins, the core shall be block board core for fixing of locks etc. The door shall comply with and as per IS 15380 : 2003 & IS 13205 : 1991 complete supplying and fixing in frame at site as specified and directed.

S&F 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified and directed.

S&F 6 mm thick toughened glass ordinary quality and glazing with and including fixing with rubber gasket and aluminium beeds and filling with silicon to fix the glass in frame/shutter complete all as specified including SS brackets.

S&F 6mm thick frosted toughened glass and glazing with and including fixing with rubber gasket and aluminium beeds and filling with silicon to fix the glass in frame /shutter complete all as specified.

S&F powder coated aluinium window having three track section 92mm x 31.75mm shutter section 50mm x 18mm mounted on bearing to slide on track plain anodised of approved colour including S&F of 5 mm thick frosted/plain glass and wire esh with glazing clip, pvc track gasket, EPDM rubber gasket on glass of weather tightening alongwith recessed type handle and lock including sealing gap with marble /granite surface with silicon sealent aking it water proof in all manner complete all as specified and directed.

S&F frame work such as grills, gratring etc,with ends of bars shouldered &/or riveted or forged into spikes,framed guard bars, barred iron door ladder,frame balusters,walk ways, railing,frame work or water tanks & similar work conforming to Fe-290 Gde E-165.

M&L 20-25mm thick single piece Kota stone for vertical partition wall/cupboard slab for fixing SS tray and sliding channel including drilling holes and fixing in CM 1:3 all as specified and as directed.

S&F in repair continuous (piano) hinges, mild steel 30 mm width of flaps, bright finish or electrogalvanised complete all as specified & directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 10mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast complete all as specified and directed.

S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed.

S&F mild steel cupboard shutter with frame, Godrej pattern made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock vertical type size 65mm 4 lever with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12 mm dia bolt 150mm long grouted in brick wall/concrete including making good the disturbed surface as original complete all as specified and as directed. Note : The measurement shall be taken of front elevation and not girthwise.

Supply only stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete.

S&F stainless steel butt hinges, 100mm medium weight and fixed all as directed.

S&F butt hinges, cold rolled mild steel , 100mm medium weight and fixed all as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised.

S&F aluminium alloy, anodised 300 mm sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed.

S&F stainless steel curtain rod not less than 20 mm dia with chromium plated including both sides finnials and bracket fancy type fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified and directed.

Taking down carefully existing bitumen tarfelt, including plaster of any description over the surfaces of roof, terraces including flashings and junctions of parapets/Curb walls etc and removing of the rubbish to a distance exc 500m but n.exc 1 Km and depositing where directed complete all as specified and as directed.

M&L screed bed 15mm thick in cement mortar 1:4 mixed with water proofing admixture as per manufacture instructions on concrete surfaces of roof slab finishing the surfaces even and smooth complete all as specified. Note :- Water Proofing admixture shall be measured and paid seperately.

M&L cleaning of all loose dirt and dust from roof and priming the surface with one coat of cold applied bituminous primer @ 0.40 Kg/Sqm conforming to IS : 3384 and applying a layer of APP based polymeric membrane not less than 3mm thick weighing not less than 3.50 Kg/Sqm, reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) and upper side of membrane thermally insulated with white gravel finish uniformly embedded during manufacturing process laid over a coat of Bitumen primer 85/25. It shall be laid by torch application having side over lap 75 mm and at the end 100 mm, all overlaps and joints shall be sealed by torch application. For parapet, membrane shall be taken to a height of minimum 60 cm and inserted inside the parapet in a groove to a depth of 65mm. The same shall be finished by a membrane flashing. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.

M&L 75mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including gall quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L brick work with old size fly ash ’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick built in cement mortar 1:4 complete all as specified and directed.

Demolition of reinforcement cement Concrete in Roof, floors(Other than ground floors), beams, staircase, landing, chajjas and similar suspended work complete all as directed.

M&L use and waste of form work to soffits of suspended slabs such as roof slab n.exc 200mm thick complete all as specified.

M&L form work to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, floor and roof n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified.

M&L use and waste of form work to sides and soffits of chajjas for fair finished surfaces complete all as specified and as directed.

M&L form work to side of pillar posts struts piers columns etc complete all as specified.

M&L form work to sides and soffits of floor or roof beam, beam nauching, griders, bressummers lintels cantilevers, shelves including supprots, overhangs etc also splays between floors and beams etc complete all as specified.

M&L reinforced cement concrete type B1 (1:2:4) nominal mix using 20mm graded broken stone aggregate as in column, struts complete all as specifed and directed.

M&L reinforced cement concrete type B1 (1:2:4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like complete all as specifed and directed.

M&L reinforced cement concrete type B1 (1:2:4) nominal mix using 20 mm graded broken stone aggregate as in chajjas and the like complete all as specifed and directed.

S&F mild steel TMT round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, binding spirally for hooping end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

All as per item No 89.00 above but 6mm dia to 8 mm dia.

M&L 7.5cm thick Sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc n.exc 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified.

M&L marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Green in colour including 10mm thick screed in cement mortar (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including rounding the edges and drilling holes for pipes in cooking platform complete all as specified.

M&L 15 mm thick rendering in cement mortar 1:4 mixed with water proofing admixture as per manufacturers instructions on fair faces of stone/brick masonry, or concrete surfaces, finished with even and smooth complete all as specified and directed. Note :- Water Proofing admixture shall be measured and paid seperately.

M&L rendering 15mm thick in cement mortar 1:6 on other than fair faces of stone masonry or concrete surfaces finished even and fair without using extra cement all as specified and as directed.

M&L 5mm thick rendering in cement mortor 1:3 on concrete surfaces as in ceilings (with sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for taking down and removal of loose/disintegrated old concrete/plaster and including and applying bonding coat of modified styrene butadiene emulsion (SBR bonding agent i.e. Nitobond SBR 45) in proportion 1(Nitobond SBR 45) : 1 (water) : 3 (OPC) by volume with the brushes etc to bind 10mm thick new cement plaster/polymer modified plaster /concrete /screed concrete on old wall/ceiling surface etc complete all as per speciifcations of manufacturer and directed by Engr-in-Charge.

Supply only Liquid water proofing admixture

M&L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and directed.

M&L one coat of synthetic enamel paint on old painted wood or wooden based surface exc 10cm width or girth including preparation all as specified and directed.

M&L applying two coat of synthetic enamal paint over a coat of red oxide primer on new steel based surfaces exc.10cm width or girth including preparation all as specified and directed.

M&L two coats of synthetic enamel paint on old steel surfaces of any description over 10cm width or girth including preparation all as specified and directed.

M&L preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coat of oil bound distemper (OBD) over a coat of wall care putty complete all as specified.

M&L preparing newly pastered surfaces of walls/ceilings, plastered and applying 2mm thick exterior wall care putty on walls/ceilings to prepare the surface even and smooth all as specified and as directed.

M&L preparation of newly plastered surfaces of ceilings & applying two coats of oil bound distemper (OBD) over wall care putty complete all as specified. Note:- Wall care putty shall be paid for separately under the respective item.

M&L applying two coats of distemper oil emulsion over 2mm thick wall care putty on newly plaster surface of walls complete all as specified and directed.

M&L complete removal of existing treatment of any description & applying two coats of oil bound distemper over 2mm thick wall care putty on undecorated old surfaces of walls complete all as specified and directed.

M&L preparing new plastered surfaces of walls and applying three coats of white wash complete as specified and directed.

M&L applying two coats of white wash on old decorated surface of walls including preparation all as specified and as directed.

M&L preparing newly plastered surfaces of wall and applying two coats of exterior emulsion paint over 2mm thick wall care putty on walls all as specified & as directed.

M&L complete removal of existing treatment of any description & preparation of old surfaces by washing rubbing down and stopping of plastered & making surface good by filling depressions by putty and applying two coat of exterior emulsion of approved shade on walls including cornices etc complete all as specified and directed.

Demolition and breaking up 150 mm bore drain pipes, salt glazed stone ware set in cement mortar including PCC haunching and bedding, complete.

M&L 150mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in bedding to NP2 drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore pipe all as specified and as directed.

M&L cutting into existing manholes / Septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150mm bore pipe.

S&F 50mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 ton/Sqm in square, rectangular or circular shape complete all as specified & as directed.

M&L cement concrete 75mm thick 1:4:8 type D-2 using 40mm graded aggregate as in sub base of floors.

M&L interlocking tiles 60 mm thick (M-35) having compressive strength not less than 35N/MM2 with grey cement and pigment over & including 25mm thick sand layer all as speicided and directed.

M&L vitrified exterior grade tiles 12mm thick (square / rectangular), matt finished, coloured (as approved by GE), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured grout to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed. Make:- Johnson Endura Designer Series or Johnson Arcade series or equivalent as approved by GE

S&F 25 to 30mm Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.2 and not exceeding 0.5 Sqm area fixed with and including one number SS clamps (grade -202) of flat 30mm x 2mm, 150mm long made to shape in each slab making V groove at top and bottom of stone and drilling hole drilling hole for hold fastener, polishing, rubbing & including silicon treatment. The gap between Stone and wall to be filled with CM 1 6 complete all as specified and directed.

M&L providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to as per design approved by GE incuding cob/any sunk/raised/ moulingas laid over metal frame and including reinforced with GI wire mesh complete all as specified and directed. Note : (a). The rate is inclusive of necessary GI wire mesh with nessary fixing clips etc (b). Only flat surface will be mearued 3. GI metal frame will be paid seperately.

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

M&L preparation of newly POP ceiling surface and applying two coats of oil emulsion over a coat of prime including 1mm thick layer of cement base white wall care putty applied as per manufacturers instruction, complete all as specified and as directed.

S&F in position ready made Dholpur Stone Chatri (size 1.2m height bottom to top and outer dia 450mm) fitted with necessary arrangments complete all as per design approved by GE.

M&L providing precast cement concrete 1:2:4 type B-O (using 12.5mm graded crushed stone aggregate) as in louvers and jallies 35 mm thick set in 1:4 cement mortar including moulding including demolition of existing cement concrete jallies of any description as specified and as directed.

Dismantling AC/CGI/fibre sheet (Corrugated,Semi corrugated etc) as in rooof etc complete as as specified.

Dismantling ballies hard/soft wood in any description in any position except posts or struts including screws, nails etc complete as as specified.

M&L roof trusses (framed), trussed, pulines, crane, gantries, rails, fastenings and heavy brackets, framing (Beam, tee, angle, chanel or flat section) including necessary cutting welding notching complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet for ridge 0.50 mm thick of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge fixed with self tapping screws as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness, including cover fillets.

M&L false ceiling with Armgyp-FB ceiling tiles of size 595mm x 595mm, 9mm thick (as approved by GE) fixed with and including galvanized iron powder coated inverted 'Tee' or 'L' section (concealed GI frame work) suspended from ceiling with provision of galvanized wire 4 mm dia and wall taping screw including butterfly clips, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions all as directed and specified :- (a) Size of grid - 610 x 610 mm. (b) Size of main Tee – 39 x 24.70 x 0.80 mm. (c) Size of cross Tee – 39 x 24.70 x 0.80 mm. (d) Size of wall angle – 22.20 x 22.20 x 0.65 mm.

M&L cutting holes in stone walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3, exc half brick & not nec one brick (Depth of embedded portion of hold fasts or lungs measured from the face of the jamb into the wall).

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate to fill the gap between roof sheet and wall, both outer and inner side all as specified and as directed.

M&L preparation of newly plastered surfaces & applying two coats of oil bound distemper (OBD) over and including a coat of white wall care putty approx 1mm thick complete all as specified.

Supply and installation of Solar Water heating system non pressurised non HHC system 500 LPD Zing with 01 non BIS approved copper to copper collectors ,ceramic linked steel hot water tank capacity to withstand highest hardwater tolerance capacity upto 600 PPM & 300 PPM of chloride & PUF insulation ,UV protected polyster powder coated steel stand structure etc including electrical backup 2 KW with thermostat suitable for above system complete all as specified.

Supply and installation of Solar Water heating system non pressurised non HHC system 200 LPD Zing with 01 non BIS approved copper to copper collectors, ceramic linked steel hot water tank capacity to withstand highest hardwater tolerance capacity upto 600 PPM & 300 PPM of chloride & PUF insulation, UV protected polyster powder coated steel stand structure etc including electrical backup 2 KW with thermostat suitable for above system complete all as specified.

Supply and lay pipe galvanized laid in floors, fixed to walls, “Medium class”, including fittings such as GI bend, elbow, tee, reducer, tee, socktes etc of size 25mm (1”) bore all as specified and directed.

All as per item No 137.00 above but 20mm.

S&F gun-metal, globe or gate valves of size 25 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S&F gun-metal, globe or gate valves of size 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

M&L sub main wiring with 2 runs single core multistranded copper conductor cable of size 4.0 Sqmm, PVC insulated, unsheathed, fire retardent, low smoke (FRLS) drawn through and including PVC caping and casing not less than 25 mm wide with all necessary fitting and including one run single core multistranded copper conductor cable of size 2.5 Sqmm PVC insulated, unsheathed, fire retardent low smoke cable as earth wire, fixed on wall/ceilling complete all as specified.

S&F single pole and neutral enclousre with two in and earth plug and socket complete with one single pole MCB of capacity 20 amps 240 volts complete all as specified and directed.

S&F bib tap 15 mm fancy type chromium plate complete all as specified.

S&F rotaional moulded polyethylene water storage tank of capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and all as directed

S&F rotaional moulded polyethylene water storage tank of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and all as directed.

S&F PP-R ball valve high pressure with polythene float fly nut complete screwed for iron pipe or brass ferrule ISI Marked of make Prayag or equivalent in other makes of size 25 mm bore complete all as specified.

M&L plates (Plain or chequred) channels,square cut or notched (Ordinary and counter sunked) welded attachement complete confirming to Fe 290 Grade E-165 complete all as specified.

M&L cement concrete in foundation, filling and mass concrete type B2 1:2:4 (40mm graded aggregate) complete all as specified.

Supply and lay hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore all as specified and directed.

Taking down carefully copper/aluminium point wiring for one light /socket/power point and taking down of teak wood batten/ PVC casing caping and making good disturbed surfaces of walls/ ceiling/ floors etc including dismentling of fittings complete all as specified.

M&L point wiring complete with 1.50 Sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 volts grade conforming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia external) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part-I, ISI marked with wall thicness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed to concealed / recessed in wall or ceiling etc including 1.50mm thick FRLS PVC inculated unsheated copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakelite white / coloured top sheet cover 3.0mm thick for one light point controlled by one way switch. Note : The concealed provision to be made if it is not existed.

All as per serial item No 151.00 here-in-before but for one fan point controlled by one switch and regulator.

All as per serial item No 151.00 here-in-before but for one bell/buzzer point controlled by one bell push.

All as per serial item No 151.00 here-in-before but for one light point controlled by two, two way switches.

All as per serial item No 151.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No 151.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No 151.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlledby one 15/16 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

All as per serial item No 151.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlledby one 15/16 Amps switch on independent board with 4.00 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 4.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour for AC.

S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts, module type complete all as specified and directed.

S&F switch piano flush type, single pole, two way, 5 Amp, 230 Volts, module type complete all as specified and directed.

S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts, module type complete all as specified and directed.

S&F socket outlet for 2/3 pin, 6 Amp, flush type 240 Volt, module type complete all as specified and directed.

S&F socket outlet for 2 in 1, 3 pin 6 & 16 Amp, flush type 240 Volt, module type complete all as specified and directed.

S&F modular bell push, 5 Amp, 240 Volts one modular type complete all as specified and directed.

S&F multi music type AC 230 volts, single pole, modular type complete all as specified and directed.

S&F PVC white cover plate with frame 1 module

S&F PVC white cover plate with frame 2 module

S&F PVC white cover plate with frame 3 module

S&F PVC white cover plate with frame 4 module

S&F PVC white cover plate with frame 6 module

S&F PVC white cover plate with frame 8 module

S&F modular metal flush box, 1 module.

S&F modular metal flush box, 2 module.

S&F modular metal flush box, 3 module.

S&F modular metal flush box, 4 module.

S&F modular metal flush box, 6 module.

S&F modular metal flush box, 8 module.

S&F ceiling rose surface bakelite 65 x 50mm two or three terminals complete all as specified and directed.

S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Make :- Havells Cat Part No LHEXBHP71NW018 or equivalent of Philips/ Crompton Greaves /Bajaj/Wipro.

S&F lamp holder PVC/Polycarbonatetype with back plate suitable forbatten fittings complete all as specified.

S&F edore LED bulb energy saving 9/10 watt including taking down old CFL lampe complete all as specified and directed. Make : Havells Cat Part No LHLDERHEML8X010 or quivalent of Phippls/Crompton Greaves

S&F exhaust fan complete 300mm sweep 240 V AC including provision of hle in wall of suitable size for fixing of exhaust fan complete all as specified and directed.

S&F stepped type electronic fan regulator, modular type and connecting up ISI marked 240 volts complete all as specified & directed.

Taking down and refixing of ceiling fan complete of any sweep 240V, AC and connecting up with necessary wiring of 3 core flexible copper wire complete all as specified & directed.

S&F sheet metal enclosures, double door type, suitable for fixing MCBs SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.

S&F sheet metal enclosures, single door type, suitable for fixing MCBs SPN with 200 Amps rated bus bar, 4 way, 240 volts complete all as specified and directed.

S&F sheet metal enclosures, single door type, suitable for fixing MCBs SPN with 200 Amps rated bus bar, 2 way, 240 volts complete all as specified and directed.

S&F MCB 32 Amps, single pole & neutral, 240 Volts complete all as specified and directed.

S&F MCB 63 Amps, three pole & neutral, 240 Volts complete all as specified and directed.

S&F MCB 6-32 Amps, single pole, 240 Volts 'C' curve, 10KA ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed.

S&F AC box single pole and neutral enclosure with two pin and socket complete with one single pole MCB 240 Volts, 32 Amps complete all as specified and directed.

S&F gate light in aluminum die cast with modern artistic design and white PC diffuser suitable for retrofit LED lamps with 1x60 W LED Lamp complete all as specified and directed.Make : Havells cat part No LHFOAQE1NZ5K7X5 or equivalent of philips/ Crompton Greaves/ bajaj/Wipro/GE.

S&F Decorative wall light, gold finish fixture with cognac hammered glass diffuser suitable for 7.5 Watt LED filament lamp E27 base with 1 x 9 Watt LED Lamp complete all as specified and directed. Make : Havells cat part No.LHFOAJD1TZ1A060 or equivalent of philips/Crompton Greaves/ bajaj/Wipro/GE.

S&F garden light fitting city cube bollard robustly designed IP65/ IK10 bollard and is easy to install with base plate complete all as specified and directed.Make : Phillips cat part No.BCP400 LED09 D CW PSU GR S1 or equivalent Crompton Greaves/ bajaj/Wipro/GE.

S&F sheet metal enclosure concealed in wall incl making good of disturbed surfaces double door type suitable for fixing MCB's, TPN 4 way, 415 Volts and including taking down old U/S DB,TPN 4 way complete all as specified & directed.

S&F sheet metal enclosure concealed in wall incl making good of disturbed surfaces double door type suitable for fixing MCB's, TPN 8 way, 415 Volts and including taking down old U/S DB, TPN 8 way complete all as specified & directed.

S&F MCB 35 to 63 Amps, Triple Pole & Neutral, 415 volts complete all as specified & directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed weather proof service connections one twin core cable flat or circular of aluminium, conductors size 10 Sqmm, stranded conductors.

S&F sub main wiring on and including passing through PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 including taking down existing U/S sub main wiring. (Note: Two runs of cable with one run of earth wire and one run of PVC conduit should measured as one length)

AARSINFRATECH

M/s ASK Enterprises

M/s S Amarjit Singh