PROVISION OF COVERED SHED FOR OR BATHROOM POINT AND SPECIAL REPAIR TO BLDG NO T-69 AND T-70 UNDER GE NORTH PATIALA

Amount

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches.pillars etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in CM 1:6 complete all as specified and directed.

Brick work with sub class B bricks curved on plan exc 6 M mean radius built in cement mortar 1:4 in half brick thick walls complete all as specified and directed

Cutting out bricks.forming toothing for,and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) new work built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. ind raking out joints, hacking for keys. scrubbing down with water etc complete all as specified and directed.

M&L for cement plastering 15mm thick in two layers in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chaljas/parapet walls etc finished even and smooth without using extra cement and fixing of chicken wire gauge where directed complete all as specified and directed. Note: WPC and chicken wire gauge will be measured and paid separately.

M&L Preparation of new plastering surfaces of walls and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed.

M&L Preparation of old plastered surfaces of walls using sand paper and applying one coats of cement base paint complete all as specified and as directed.

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

M&L Preparing new plastered surfaces of walls and applying two coats of OBD over a coat of primer complete all as specified and directed

M&L old plastered surfaces of walls and applying one coat of OBD complete all as specified and directed

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on wall surfaces complete all as specified and directed

Preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash complete all as specified and directed

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 sqm incl cutting holes and making good read shape for hold fast block for new frame complete all as specified and directed

Takding down chowkhats or frames (without talding off shutters from the frame) exc 1.5 sqm and n. exc 4.00 Sqm incl cutting holes and making good read shape for hold fast block for new frame complete all as specified and directed

S&F Powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm min thickness for chowlats or frame & shutters made of size 44.45x44.45x1.29mm min thickness for side rails and middle rail, 114.3X44.45X1.29mm min thickness for top rails and bottom rails complete all as specified and directed.

S&F 12mm thick high density fibre board pre-laminated on both sides (water proof) below & above middle/lock rail in powder coated aluminium doors and to be fixed with and including EPDM gasket to render the glazing air and water tight etc aluminium beads 20 mm size with and complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and 140mm aug width of apreture complete all as specified and directed

S&F aluminium windows any type (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm min thickness and shutters made of 63.5X31.75X1.29mm min thickness complete all as specified and directed

S&F factory made aluminium 50 micron powder coated grill, opening stae 101.6 X 635 mm (4"x26") and of approx weight 1.345 Kg/m complete fand in position in windows in all respect as specified and directed.

Providing and faing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 635 X 38.10 X 1.29 mm min thickness complete faed in all respect as specified and directed.

S&F stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed.

S&F powder coated aluminium tower bolt 200mm long complete all as specified and directed.

S&F powder coated aluminium handles 150mm complete all as specified and directed.

S&F powder coated aluminium hook and eye of suitable length adjustable to aluminium window shutters complete all as specified and directed.

S&F 5mm thick frosted glass fixed to aluminium ventilator including necessary EPDm gasket to render the galsing, air and water tight etc and powder coated aluminium beeds 20mm sized complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cm LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer's specifications complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/um LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with as screws and solvent cement/ adhesive to make kitchen cabinet, cupboard shutters and shelves complete as per manufacturer's instructions complete all as specified and directed.

S&F 12mm thick LEAD FREE PVC Celaka ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull drawer sides complete as per manufacturer's specifications complete all as specified and directed.

S&F 5mm thick with min density 600 Kg/cm LEAD FREE PVC Celaka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/adhesive on frame work of cup boards complete as per manufacturer's instructions complete all as specified and directed

SAF 6mm thick with min density 600 Kg/cum. LEAD FREE PVC ply fixed with as screws and solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer's specifications complete all as specified and directed

S&F auto closing hinges 35 mm of D crank KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed.

S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified and directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/5N finished 200mm long matt finished complete fixed in position all as specified and directed.

S&F hall catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified and directed.

S&F Stainless Steel 304 grade wire Basket (avg, wait 2.5 to 4 Kg per basket) of pull out type is plain/cuphaucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required as complete fland is position all as specified and directed.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body sise 75mm suitable for wardrobes/CB etc. complete all as specified and directed.

Dismantling of Stone slabe and tiles of any description or thickness laid pointed in any mortar as in floors, aprons etc. complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring of size 500 x 500 mm sach & 18-20 mm thick, set and jointed in cement slurry including border 100mm wide baroda green/white mable as per pattern approved over & including screed of 20-22 mm thick in cement mortar (14) and pointed bed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified and directed. Note :- All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabe shall be uniform

MAL for machine cut kota stone slab as in skirting of 18-20 mm thick, set and jointed in cement slurry over & including screed of 10 mm thick rendering in cement mortar (14) and painted in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed.

Demolition of cement concrete in floors and pavings next 15 cm thickness below or above ground level, complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and mooth without using extra cement as in plinth protection including provision of construction joints and filling with compound of grade A complete all as directed by Engr-in-Charge and complete as specified

Dismantling floor, hearth or wall tiling including CM(bedding (but not hacking), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for ant-skid ceramic joint free premium quality coloured tiles area of each tile esc 0.06 spm but next 0.11sqm, as in floors etc. in any pattern ghe & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters es etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for baroda green marble machine cut as in shelves/steps/counter tops, 20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing cutting type polishing and bull nose on exposed sides complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in artar (1:4) including point ing in white cement (1:2) un ing marble dust with admix ture of pigment to match with shade of granite and incl and over 20mm thick screed bed in CM 1:4 complete all as specified and directed

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 20 mm thick screed in cement mortar (1:4) over and pointed white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for single charge, Ceramic stain & scratch resistant, joint free premium quality coloured tiles 600 x 100 mm and 8-10 mm thick in any pattern of light & dark tes as approved.es vertical surfaces such as in sidrting/dado etc Jength of each unit not less than 600 mm and height not more than 150mm, set and jolted adhesive of Sika (Ceram Grey) 5 Kg/sqm over & indading 10 mm thick rendering in cement mortar (14) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.Note: Skirting should be flushed with the wall plastering.

M&L for machine pressed precast concrete inter locking paver block any shpe and size made of M-35 grade concrete with grey cement and no pigment) of 80mm thickness with 6mm top layer of anti abrasive material laid over 25mm thick (compacted) fine sieved sand filing complete all specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for precast cement concrete type 80 1.24 using 12.5mm gr aggr set in CM 14 louvers and jallies 25mm the (measured solid) ind all mouldings complete all as specified and directed

M & L for RCC M-20 (using 20mm graded stone ag1:24 type B1 for slabs supported on walls, beam and columns in Boors, roofs landings canopies, deck slabe and in shelves complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs not esc 200mm thick horizontal for flat roofs complete all as specified and directed.

Form work to sides of slab not ext 20cm wide for rough finish surface complete all as specified and directed.

Mid steel TMT bars men dia & over cut to length, best to shape required ind cranking bending with0.9 mm dia MS wire (annealed) not less thand 9 mm dia or securing with clips complete all as specified and directed.

All as per item no 59 here-in-above but 5mm dia and over upto and ind 10 mm dia in stirrups, spacers & binders complete all as specified and directed.

M&L cast iron nahani/floor/maltifloor trap 100 mm dia including jointing with solvent cement in repair fixed in cement concrete (1:24) type complete all as specified and directed

S&F cast iron junction combination Tequal or unequal for 100mm bore with access door as in repair complete all as specified and directed.

S&F cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints fixed to walls 100 mm bore in repair complete all as specified and directed.

S&F cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints fixed to walls 75mm bore in repair complete all as specified and directed.

S&F cast bend (any radius) of 100 mm bore in repair complete all as specified and directed.

S&F cast bend (any radius) of 75 mm bore in repair complete all as specified and directed.

S&F CI bend (any radius) with oval access door of 75 mm bore in repair complete all as specified and directed.

S&F CI cowel 100 mm dia complete all as specified and directed.

S&F CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches of 100mm dia fixed in cement joint complete all as specified and directed.

S&F flushing cistern of PVC 10 ltr. cap, with dual flushing system, valveless syphonic action type.. low level, white/ivery/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and ind all necessary accessories ke rag bolts/gel gasket etc as recommended by acturer for thing, packing and taking down existing of any description/size complete in all respect all as specified and directed.

S&F in repair Pillar taps, fancy type, chromium plated cast copper alloy, with capstan heads, chromium plated, screwed down high pressure without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for wash hand basin, 15mm bore, fed as in repair complete all as specified and directed.

S&F in repair chromium plated, towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fixing 15mm bore C P Angle cock (weight not less than as specified in SSR) complete all as specified and directed.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white colour of size 520K360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe.tc.withFlush pipe and incl S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing packing and including and taking down existing of any description/sise complete in all respect all as specified and directed.

S&F vitreous china premium/1st quality wash basin half pedestal, white/ivory/off white, flat hack, size 500x400 mm including pedestal, screws & plug and brackets etc all accessories as recommended by manufacturer inc. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for faing, packing union and ind 32mm brass CP waste coupling and completein all respect as per manufacturer's instructions and taking down existing of any description/size all as specified and directed.

S&F in repairs Soap dish vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

Brass chromium plated shower roses 125mm size with swivel joint any size faing in repairs all as directed and specited

Taking up or down steel tubing and connections ind cleaning for refixing to store yard of size 15mm bore complete all as specified and directed

Steel water tubing medium grade 15mm bore galvanised with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed

All as per serial No 80 here in before but except water tubing (Old serviceable tubing as retrieved vide items above shall be reused under this items) complete all as specified and directed

Taking up or down steel tubing and connections ind cleaning for refixing to store yard of size 20mm bore complete all as specified and directed

Steel water tubing medium grade 20mm bore galvanised with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed

All as per serial No 83 here in before but except water tubing (Old serviceable tubing as retrieved vide items above shall be reused under this items) complete all as specified and directed

450mm long PVC connection of approved quality with brass check nuts at both ends for bore pipe complete all as specified and directed

S & F Rotational moulded polythene water storage tanks, double layered (cylindrical vertical with closed up) of capacity 1000 ltr hoisted and fixed in position as in repair complete all as specified and directed.

S & F Bib tap cast copper alloy chromium plated, fency type with capstain head handle screwed down screwed for iron pipe and fixed of 15mm bore pipe after taking down of old brass bib tap complete all as specified and directed.

S & F Ball brass valve, high pressure with polythene float and fly nnut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs, complete all as specifed and directed

S & F Stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of broe 20mm fixed as in repairs complete all as specified and directed.

S&F in repair stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified of 15mm bore, fency type chromium plated with long shank and cup (conceled type) complete all as specified and directed.

S&F 6 mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chorme finish with 1st class wooden beading french polished, etc complete fixed in postion all as specified and directed.

S&F stainless steel sink with drainage board, AISI 304 quality grade, 0.8 mm thick, glossy finish for kitchen with plugs washers and cp waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc overall size 915mm x 460/928mmx 458mm with bowl size 410x355x185mm/430x355x200 inclunding bottle trap 32mm with 125mm & 175mm long with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2: as directed

S&F stainless steel plate rack made out of 1mm thick stainless steel of size 900x750x250mm complete all as specified and directed.

S&F single lever sink mixer with swinging spout with connecting legs and wall flangs, wall mounted fency type chromium plated cast copper alloy screwed down high pressure ends for 15mm bor of iron pipe or for union and fixed in position complete all as specified and directed by engineer in charge.

S&F Stainless steell tubing of 25mm dia chromium plated min 1.0mm wall thickness as in certain rod complete incl s&f 02 Nos stailess steel brackets/ fintals fency type stops fixed with SS screwes etc all as specified and directed as in repair Note : for the purpose fo mesurement and payment running length of curtain rod only shall be considered

M & L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in roof kerbs, benches and water troughs etc including necessary moulding complete all as specified and directed

S&F framed work of grade Fe 410-w (Gde E-250) quality A as in doors or gates of angle or cooler stand or other section with gusser plates rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fitings (exclusive or steel sheeting or other covering running rails and guides and hanging all fastening and fixing complete all as specified and directed.

S&F MS hollow rectangula/ square tubes/ pipes of YST 310 grade as in frame work for roofs / sheds / chajjas etc and like similar items incl welding/ fixed with conn plates etc incl one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for ACP sheet of 4mm thickness of approved plain colour/shade for cha/un-chades/cladding and the like works etc. fed to frame /hollow sections of any size description including finishing all the joints with silicon or as per manufacturer's instructions complete respect and complete fixed in position incl scaffolding/ladders etc as required and also making the joint between wall and chajas/sun-shade water proof all as specified and directed. Note: Frame Work shall be measured and paid separately

Dismantling of asbetos/fibre cement corrugated/semi corrugated sheet in roof covering including 'T' Or 'L' hooks complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa roof covering/dadding to wall, fixed with self tapping screws complete all as specified and directed Note: Fixing of sheets will be done strictly according as per manufacurer's instructions

S&F Pre-painted galvalume aluminium tinc coating Cl based plain steel sheet 650mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including covers fillets complete all as specified and directed

Providing & Fixing false ceiling at all height with GRG (Glass fibre Reinforced Gypsum) false cell of size 595x595 mm of approved texture , design and patterns having moisture content less than 2% , humidity resistance of 99% ,NRC 0.50 to 0.75 as per IS 8225/1987 , Non combustible as per BS 476 Part 4, 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm incl both sides) comprising of main T runners of size 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 3000 mm , cross of T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm, suspended form ceiling using galvanized mild steel hanger rod (galvanized @ 80 grams per sqm )i.e minimum 50 mm long, 8 mm outer diameter M-6 dash fasteners , 6 mm fully threaded hanger rod up to 1000 minimum length as per length required at site for desired height and L-shape level adjust of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of 40 mm long SS screws with plastic raw plugs at 450 mm long SS screws with plastic raw plugs at 450 mm centre to centre , with semi perforated 12 mm thick micro tegular edged GRG false ceiling , complete all as specified and directed.

S&F PVC Wall panelling of section sizes 150x10 mm (colour/pattern as approved by Accepting Officer) complete fixied in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer complete all as specified and directed

Dismantling framed trusses n exc 10m complete all as specified and directed

M&L Providing cement concrete with type B0 1:24 using 12.5mm graded aggregate as in coping and the like including for useof form work (straight or curved) weathering slightly rounded or chanderred angles and throating complete all as specified and directed

S&F roof trusses (framed) Fe 410-W (Gde E-250) quality A trussed purlins crane gantries, rails and fastenings and heavy bracket framing (beam tee, angle channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed

Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n exc 10cm long of 20mm dia complete all as specified and directed

Mild steel screw halts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n exc 100cm long of 20mm dia complete all as specified and directed

M&L for preparing steel and Iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed.

M/L PCC 1:4:8 using 40 mm graded stone aggregate as in foundation filling and mass concrete for fixing RCC/ any fencing posts complete all as specified and as directed

Excavation in trenches in soft/ loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 meter in depth and not exceeding 10 sqm on plan and getting out complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick each, complete all as specified and as directed.

Removing of surplus soil/ excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L 20mm bore, gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, piece of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLS single core multi-stranded copper conductor for One light/fan point controlled by one switch 6 amp one way and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring)

All as per Sl item No 121 above herein before but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board complete all as specified and directed.

All as per Sl item No 121 above herein before but one 5Amp socket point on same board but with other switches complete all as specified and directed.

All as per Sl item No 121 above herein before but one 5Amp socket point on independent board but with other switches complete all as specified and directed.

M&L modular switch 1 way 6 A, 1 module complete all as specified and directed.

M&L modular socket, 6A-2/3 pin combined, 2 module complete all as specified and directed.

M&L modular switch 16 Amps, 1 module with indicator complete all as specified and directed.

M&L modular socket 16 Amps, 6 pin, 2 module complete all as specified and directed.

S & F fan regulator modular type 2 module complete all as specified complete all as specified and directed.

S/fix ceiling rose 65x17mm three terminals complete all as specified and directed.

S&F Lamp holder ,PVC/polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

S&F LED bulb 9 watt complete all as specified and directed.

M&L for highly efficient LED building/security light 25 watt luminaries new generation energy saving & environment friendly with lens made of pressure die cast aluminium alloy housing LM24 for gear and exturded alluminium lamp housing & enclouser with toughened glass with IP-65 of protection class,with high power LEDs as light source having luminous efficiency should be > 80Lm/w with active power factor correction (APFC) electronic gear (Heat shrink for better heat transmission) . It shall have epoxy powder coated grey finish phosphochromate treatment and operating voltage range should be fron 120 volt to 270 volt AC and frequency range 50Hz and suitable for an ambient temparature from -40°C to 50 °C and humidity level 10% to 90% including connection with PVC unsheathed wire aluminium conductor 3 x 1.5sqmm fitted on pole/building with GI bracket of suitable size including taking down of u/s light fitting of any type/size complete all as specified and directed Engr-in-Charge.

supply and fix tube light fitting 20 Watt 4 Feet long LED type complete all as specified and directed.

supply and fix tube light fitting 10 Watt 2 Feet long LED type complete all as specified and directed.

Supply and fix incl taking down Led Stellar Square/round recessed Mounted slim and and Elegant Downlight /Panel for indoor application with high aesthetic appeal of capacity 12 watt, minimum 100 lumen/watt having correleted color temperature(CCR) of Emitting light 6500 OR 3000 K(According to requirement) with CRI of LED >90.complete with all electrical connection up with PVC insulated twin core flexible copper conductor cable of suitable sizecomplete all as specified and directed by Engr in charge.

Supply and fix 1 X 10 Watt LED bulkhead lumanries polycarbonate body heat resistant prismatic glass cover speicfically designed gasket fitting complete all as specified and directed.

S&F MCCB DB VTPN 4 WAYdouble door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for ways with IP43 protection complete all as specefied and directed. (Note: MCCB should be B or C curve as directed by engineer in charge)

S&F MCCB , TPN, 240 Volt , 125 amp for fixing in DBs of including proper thimble connections complete all as specified and directed. (Note: MCCB should be B or C curve as directed by engineer in charge)

S&F MCB DB double door 240 volts with 125 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 8 ways with IP43 protection complete all as specefied and directed. (Note: MCB should be B or C curve as directed by engineer in charge)

S&F MCB SPN 40 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed. (DB will be measured and paid separately under respective items of sch A)

S&F MCB SP 6 to 32 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed. (DB will be measured and paid separately under respective items of sch A)

Supply and fix earth metal plug Box capacity 20 amp complete all as specified and directed.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 4 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Note1: Chasing and cementing work measured and paid seperately. Note2 : Two runs of 6 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 4 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 4 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Note1: Chasing and cementing work measured and paid seperately. Note2 : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

M&L for cutting chases for concealed conduit wiring, pinning in making good to facings where required and pointig in cement mortar1:3 to ends or edges of landings, and making good, cutting not exc 10 cm girth.all as specified and directed by engg- in charge

M&L in replacement of old/damaged earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc complete all as specified and as directed.

M& L for taking down and refixing of 1200 mm ceiling fans including replacemment of down rod of suitable size complete all as specified and as directed.

Taking down LED tube light fitting 18/20watt hand over to MES STORE and refixing after neccery cleaning complete all as specified and directed.

M&L for providing river sand as in sand cushioning to under ground cable including punning down of sand in layers as specified and as directed

supply and laying un-reinforced precast concrete cable cover class LV, Type 2, with peak size 300mmx180mmx40mm. complete all as specified and directed by Engr-in-charge.

M&L for galvanized steel tubing 50 mm light garde (ISI marked) inreplacement of old damaged steel GI pipe for protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and directed.Make : Tata/Jindal/Surya

Supply , laying , jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 50 Sq mm 4 Core with aluminum thimble of same size complete all as directed.

KG BUILDERS

Arneja Builders