BALANCE WORK OF ADDN ALTN TO BOUNDARY WALL AND ALLIED WORKS AT ICGS GOPALPUR

Amount

M&L for RCC M30 grade concrete (design Mix) with 20 mm graded aggregate in columns, pillars, piers, posts and struts and the like, complete all as specified and directed.

M&L for RCC M30 grade (Design Mix) with 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landing, balconies, desk slabs complete all as specified and directed

M&L design Mix RCC M30 grade concrete with 20 mm graded aggregate in beams, Lintel over 1.5m span, etc and the like,complete all as specified and directed

M&L for RCC M30 grade concrete (design Mix) with 20 mm graded aggregate in chajjas and the like,complete all as specified and directed

Use and waste of Form work to sides of pillars, posts, struts, piers columns and stanchions for fair finished surfaces, complete all as specified and directed

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work complete all as specified and directed

Use and waste of Formwork to sides and soffits of floor or beams, RCC band etc, complete all as specified and directed

Use and waste of formwork to chajjas fair finished surfaces of concrete flat complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surface finishing even and smooth without using extra cement complete all as specified and directed.

M&L for GI wire netting 0.90mm dia and 12 mm mesh lathing to wood or metal studding, joists etc. in wall, ceilings, stanchions, beams, etc. including all laps, cutting and waste, complete all as specified and directed.

M&L 18-20 mm thick granite work of any type colour, table rubbed and polished in gate pillars and similar structures like in CM 1:4, incl. pointing in white cement 1:2 using marbel dust wih admixture of pigment to match with shade of granite, complete all as specified and directed

Extra over rendering or plastering for work in isolated width or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar works exc 15 cm but n exc 30cm in width or girth, including cutting to edges, complete all as specified and directed

Ditto all as per item No 12 here in before but not exc. 15 Cm.

M&L for CRS TMT bars conforming to IS-Fe-500D of dia 10mm and above including beams, columns, slabs, piles and pile cap etc and over cut to length, bent to shape required including cranking bending spirally for hooping for pile foundation hooking ends & binding with & incl MS steel wire (annealed) not less than 0.9mm dia & securing with clips complete all as specified and directed

Ditto all as per item No 14 here in before but 5 mm dia and over upto and incl. 10 mm dia in stirrups, spaces and binder complete all as specified and directed

Supply and application of exterior texture paint (natural stone) one coat over one base coat (primer) including preparation of any type of surfaces on circular column/elevation/facia, complete all as specified and directed by Engineer-in-Charge. Note: Paint shall be ready mix with natural stone granulas size as directed by GE consisting of excallent syenthitic binders, anti cracking, anti foaming, anti fungal, anti rusting agents. It should not contain syenthitic inorganic pigments and shall have excellent tolerance to ultraviolet rays and to be applied in single coat complete all as specified and directed

M&L for 304 grade stainless steel framed work such as grills, gratings etc with ends of bars shoulders and/ or riveted or forged into spikes, ladder, framed balusters walk ways, railing etc, complete all as specified and directed

S&F of 304 grade SS letter size of width of each letter 20 cm width,30 cm height 2 mm thick fixed on wall, complete all as specified and directed

M&L for 4 mm thick aluminium Composite Panel Wall clading, including necessary frame work as per manufacturers instruction complete all as specified and directed. Make: Alstrong/aludecor/alucobond/alstone.

Excavation in trenches n. exc 1.5 mtr. wide, depth n. exc 1.5 mtr. as in soft/loose soil, complete all as specified and directed

M&L PCC type D2 1:4:8 (using 40 mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight of curved on plan exc 6m mean radius, built in modular brick in cement mortar 1:6 complete all as specified and directed.

M&L for plain cement Concrete Type B0 1:2:4 (using 12.5 mm graded granite stone aggregate) in copings, bed plates and the like, complete all as specified and directed

M&L PCC 1:3:6 type C2 (using 40mm graded stone aggregate as in surface channels/benching and drains complete all as specified and directed

M&L for extra for forming fair finished drain or channel 60 cm inner girth of cement concrete surfaces using extra cement, including forms, moulds mitred/stopped ends etc complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on fair surfaces of brick or concrte walls surface incl finishing surface even & smooth without using extra cement complete all as specified and directed

Returning, filling in, incl spreading, leveling, watering and well ramming in layers n exc 25 cm as in soft/loose soil complete all as specified and directed

Removing excavated material nexc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed

Demolition of RCC of any description and any position not otherwise specifically provided included latent concrete complete all as specified and directed

Demolition of cement concrete in ground floor and paving n. exe 15 cm thick (above or below ground level) complete all as specified and directed

Demolition of stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings dressed stonework and precast concrete articles complete all as specified and directed

Dismanling of structural steel work including ,doors, gate but excluding framed truss etc complete all as specified and directed

Removing building materials etc. to a distance of 300 M or under, beyond the lead included in the item, including loading, unloading and stacking at the destination complete all as specified and directed

Excavation over area not exc 1.5m depth and getting out in soft/loose soil complete all as specified and directed

M&L for RCC M30 grade concrete (design Mix) with 20 mm graded aggregate in foundation including raft, foundation beams, pile cap, grade beam, plinth beam, bases for columns etc footing basement slab and the like,complete all as specified and directed

Use and waste of form work to sides of foundations, pile cap, footing, grid beam, plinth beam etc. of rough finished square, rectangular or polygonal surface complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar 1:4 on fair surfaces of brick or concrte walls surface incl finishing surface even & smooth without using extra cement complete all as specified and directed

M&L for preparing plastered or unplastered new surface and applying two coats of weather proof paint over and including a coat of primer on wall as specification etc complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tieing crossings with and provisioning of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (Note : Each line wire measured).

M&L for plain cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like, complete all as specified and directed

S&F MS angles for posts and fencing including cutting to shape as directed, drilling holes notching for wire, welding etc and MS pipe for cattle trap. Flat iron fillets for securing wires, conforming to Fe-290 Gde E-165 complete all as specified and directed

M&L for two coats of synthetic enamel painting over one coat of primer on steel surface of any description over 10 cm in width or girth not otherwise described including preparation complete all as specified and directed.

S&F of concertina coil super Punch barbed tape (SRPBT) Aluminium base helix coil with and including necessary GI fixing clips for securing complete all as specified and directed with following specification:- (i) Dia of coil(unstreched-610 mm (ii) No of circle-51 turns per coil(iii) weight of each coil with hessian pack-8.5kg.(iv) Coverage per coil-8RM (v) Central core wire:-made from 2.6mm dia GI-H.T.S.S wire as per IS-4454 galbanised as per IS 2629.(vi) Razor Punched tape is steel comprising of AL base with Zinc alloy @ 150 gm/m2 conforming to ASTM-729/A-729M with additional primer treatment of Epoxy/Polyurethane & final paint top coat of Caulified green shade(BSL 139) by Hot Dipping process. The item also includings supply of 3 nos of Horizontal ZAL runner wire for fixing of Concertina coil. Make: CONSEC ZAL or eqivalent make as approved by GE.

M & L for RCC M30 grade (Design Mix) with 20mm graded aggregate in walls,retaining walls,basement walls,above top of footings,including attached pilasters and buttresses, complete all as specified and directed.

Use and waste of formwork formwork to faces of walls,retaining walls,abutments parapet and similar work including attached pillasters, complete all as specified and directed.

Supply , fixing and testing of post Top lantern LED light fitting of 25 watt designed with symmetrical light distribution , spun aluminium landscape luminare with high power LEDs as light source complet fixed on gate /GI pipe of 50 mm dia complete with necessary fixing arrangement all as specified and directed.

Supply and laying underground XLPE insulated screened PVC bedded galvanized steel strip or wire armoured heavy duty electric power cable with aluminum conductor 1100 volt grade of following size complete all as specified and directed :-

4 core, 16 sqmm

4 core, 10 sqmm

2 core, 6 sqmm

M&L for earthing complete with galvanised steel plate earth electrode of size 60cmx 60cmx6mm thick, burried in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 m below normal ground level, connected with GI wire 4 mm dia earth lead by means of nuts, bolts,check nuts and washers and galvanised iron of steel 15mm bore pipe medium grade for protection connected to main switch board or main control board all as specified and directed including , 20mm dia GI pipe medium grade for watering,funnel with wire mesh, PCC pit with RCC cover including necessary earth work excavation and removal etc all as specified in plate No 3 of SSR Part-I 2009 and complete all as specified and directed.

M&L for earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6.0 mm buried directly in ground (earth pit not less than 2.25 Mtr below normal ground level ) connected to galvanized earth lead strip of size 32 mm x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel including 40 mm dia medium grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type C1, 50 mm thick precast RCC (1:2:4) type B1 pit cover reinforced with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including galvanised strip of size 25 mm x 4 mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a disance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No. 3 of SSR Pt-I including taking down old one and complete all as specified and directed.

M&L for laying of bricks locally available sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable complete all as specified and directed.

M&L for local sand coushioning with dry and clean over and under the cable for protection of cable , 80 mm sand laid before laying the cable 150 mm sand after laying the cable complete all as specified and directed. Note : Punned thickness shall be measured for payment purpose.

Supply and fixing Tubes, 'light grade', galvanised 50mm dia, with all fitting; laid in trenches complete all as specified and directed.

Supply and fix Fire Alarm sounders / Sirens electronic type horizontal single stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 meter with sound output variation of + 5 DB for 3500 meter range complete all as specified and directed .

BOOM BARRIER AND SPIKE BARRIER Supply and installation and commissioning of electromechanically operated boom barrier /Lifting Barrier with Remote control for up to 6m wide road of opening and closing time 3-5 sec with IP protection IP 54 of 100% duty cycle including nessary push button and boom rest along with RFID long range reader with 12 mtr reading range , TCP/IP door controller including mannualy control if supply failure including installation, testing and commissioning :- (a) Boom Length- 6.0 mtrs and Effective Boom Length -6.14 mtrs (b) Boom Dimension - 138 x60 mm (c ) Boom articulation Kit (d) Housing -450 x 400 x 1100 mm with aluminium material (e ) Silhouette Light (f) Reversing on obstacle (g) control Circuit suitable and standard electronic circuit should be provided for smooth operation of the barrier for UP/Down movement. (h) communication cable, ( 2 core twisted pair cable) (h) Push button (I) Optical Beam Sensor / pair of photo cell accessories (j) All Civil Work including PCC work and related foundation for boom barrier and equipments including making good existing structure disturbed during installation and commissioning of barrier shall be deemed to included in quoted rate. The depth of foundation shall be recommended by the manufacture. Make : SMART POWER/BGI/ SECURE INNOVATIVE/GODRAGE

Supply and installation and commissioning spike barrier with tire shredder flat type , electrically operates with remote control or push button, independent control panel which has been capable of accepting safety device such as smart card , magnetic card reader , optical beam sensor etc. , Option for manually control if failure main power supply Electromechanical drive unit and blocking width up to 6 mts complete all as directed. (a) Blocking Width - upto 6 mts (b) Dia of Spike - 25 mm (c ) Height of Spike Above Road Surface -150 mm (d) Height of the Block - Flush to road level (e ) Angle of Spike in raised poisition -60° degree (f) Distance between C/C adjacent Spike-100mm (g)control unit- micro Controller (h) Axel load bearing Capicity 25 Ton (i) Material Of Cabinet- Mild steel Galavanized (j) Material Of spike - M.S Chrome Plated Hardended Spike (k) communication cable, ( 2 core twisted pair cable) (l) All Civil Work including PCC work and related foundation for Spike barrier and equipments including making good existing structure disturbed during installation and commissioning of barrier. The depth of foundation shall be recommended by the manufacture. Make : SMART POWER/BGI/ SECURE INNOVATIVE/GODRAGE

S&F of Neon Sign Board for Indian Coast Guard Station, Gopalpur to be installed at the Entrance Indian Coast Guard Station, Gopalpur complete all as specified and directed as follows:-

Supplying of Aluminium and acrylic 3D dual channel letters of 3 mm thickness and 75 mm deptwith computer designing computerized laser cuttingon the acrylic sheet for preparing 3 D channel letter is fabricatedfrom fiber sheet on a flat sheet of polycarbonated by a computer controlled rouler creates the back of the channel letter and basis for the letter shape the back of te channel letter are formed by bending a 3 - inch -wide (50mm) strip of fiber sheet around the 3 D channel letter welded using alloys with a metting point above (185 to 329 degree F ) at the seam with a fiber sheet stiched to fastened with glavanized to create a solid shape. of the 3 D channel letter of IS - 14443-1997 etc complete. for finished item work complete all as specified and directed.Note :- Total max 25 Letters per board

Providing Blue colour neon sign board electrified glass tube containing a rare filled gas (the gas pressure in the tube is well below atmospheric pressure) with8 mm Glass Tube diameter and 1 mm glass will thickness with heating the glass tube for bending and shaping of each letter. providing nitrogen luminous gas and patented mechanism with ionized electrification to the tube. the mercury evaporaters into mercury vapour, which fills the tube and produces strong ultraviolet light. the ultravoilet light. The ultraviolet light thus produced excites the various phosphor coating designed to produce blue colour. providing neon sign transformer for illumination of tube glass usually running at voltage ranging between 2 - 15 KV output and 110 v input and current 18 and 30 mA (higer currents available on special order) these power supplier operated as constant current sources (a high voltage supplywith a very high internal impedance ratredlife one year etc. complete finished item of work complete all as specified and directed.

Providing of ACP board for displaying the 3 D channel letters with MS frame 0f 38mm X 38mm box structure fabricating , wellding, grinding, providing of silver grey colour of 4 mm aluminium compositye pannel sheet of (alloy grade 315 H 14 PVBF coating for anti fungal and anti bacteric propertiessurface protection ) Covering with four side of the board ,along with four side of the board . along with MS "L" angle of 50 mm 50mm for support of MS Box structure Anchore fastener Bolts along with all requried infrastructure and requriement etc. complete. for finished item of work complete all as specified and directed.

Installation and assembling of the corporated sign board with MS " L " angles with all requried infrastructure and equipment along with transporations loading unloding and with all incidental and operational charge etc. complete for furinished items of works complete all as specified and directed.

Supplying of Retro reflective Sign Board "INDIAN COAST GUARD STATION, GOPALPUR " to be installed at the Entrance Indian Coast Guard Station, Gopalpur at Matikhalo Gopalpur complete all as specified and directed as follows :-

Supplying of Aluminium 3 M retro reflective stickers with computer art work designing computerzied laser cutting for displaying the sign board content approved by the department etc complete for finished item of work complete all as specified and directed.

Providing ACP Board for displaying the 3D channel letters with MS frame of 38 mm X 38 mm boxstructure fabricating , welding ,grinding,providing sliver grey colour of 4 mm Aluminum composite panel sheet of (Alloy grate 3105 H 14 PVDF coating for anti fungal and anti bacterial properties surface protection) Covering with four side of the board along with MS "L" angle of 50 mm X 50mm for support of MS BOX Structure Anchor Fastener Bolts along with all requried infrastructure and equipement etc complete for finished item of work complete all as specified and directed.

Installation and assembing of the corporate sign board with MS "L" angles with all requried infrastructure and equipments along with transportations loading unloading and with all incidental and operational charge etc complete for finished item of work complete all as specified and directed.

Suppling and fixing of fabrication and fitment of a continuous signboard (appx Length - 24 feet, height -05 feet ) with blue coloured neon light letters depicting "INDIAN COAST GUARD STATION, GOPALPUR " on a white light /illuminiated back ground are through out and above the main side/wicket gate complete all as specified and directed.

S&F Glow sign board of size (1500 mm x 900mm x 175mm) duly writing " RESTRICTED ENTRY DEFENCE AREA TRESPASSER WILL BE PROSECUTED" including necessary LED light, wire, frame, acrylic sheet etc complete to be installed at the entrance gate of Indian Coast Guard Station, Gopalpur complete all as specified and directed.

M/S.J.BIJAYA KUMAR PATRO (BID ID -3364495)

JPR CONSTRUCTIONS AND ENGINEERS (BID ID -3364720)