Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.6 LAccepted-AOC 2ND 6 KEDIA HOUSE MA ROAD BYELANE 1 REHABARI GUWAHATI ASSAM 781008 | KAMRUP METRO | ASSAM | 781008 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹41.7 L+₹4.0 L (10.6%)Rejected-Finance 23 6 C LAL VIHAR EAST END BAMRAULI PRAYAGRAJ 211012 U P | PRAYAGRAJ | UTTAR PRADESH | 211012 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹42.6 L+₹4.9 L (12.9%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹44.2 L+₹6.4 L (17.1%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹45.8 L+₹8.1 L (21.5%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹49.4 L
EMD Value
₹98,700
Closing Date
15 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bamrauli
GE (AF) Bamrauli
PROVN OF MONSOON WATER DRAINAGE AND RECHARGE PITS AT 820 SU AND PROVN OF 18 METER FLAG MAST AND OTHER SANCTION WORKS UNDER GE (AF) BAMRAULI
2022_MES_560964_1
8754/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Bamrauli
Class D Cat a(i)
2 documents required · 2 mandatory
₹500
GE (AF) Bamrauli
₹98,700
Yes
19 Nov 2022
2 Nov 2022
17 Nov 2022
10 Nov 2022
15 Nov 2022
10 Nov 2022
Amount
Excavation in trenches for n.exc 1.50 m wide not exceeding 10 Sqm on plan and n.exc 1.5m in depth in soft/ loose soil and getting.
M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in mass-concrete/foundation or floor complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. all as specified and directed.
Removing excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point.
M&L for brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6M mean radius, built in cement mortar 1:6 complete all as specified and directed
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed
M&L for Providing, cement concrete type B1 1:2:4 (20mm thick stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L for Pre-cast cement concrete type B-1 (1:2:4) (using 20mm graded aggregate) as in drain cover slabs set in cement mortar 1:6 including necessary formwork complete all as specified and directed.
S&F Mild steel round bars 8mm dia and over, cut to length, bent to shape required, including ranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250)Part- I quality-A orFe 290 (Gde -E-165
Extra for forming finished drain or channel 30cm inner grith in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc (inner grith only to be measured for payment)
M&L for drilling and rimming pilot hole upto 500mm dia bore from ground level in alluvial soil upto 105 M (± 10 M) using RR bit by rotary method including removal of surplus soil to distance n.exc 50 M complete all as specified and directed by Engr-in-Charge.
M&L for packing pea gravel 5 to 8mm size and natural shape brought direct from river bank/bed and packing around casing pipe to entire depth upto ground level complete all as specified and as directed by Engr-in Charge.
Supply and assembly for lowering, jointing and fixing in position borehole drilled of 150mm nominal dia PVC pipe (grade 10 Kg/Cm2) blank, ISI marked, with well cap with socket on the top of each bore and well plug at the bottom of bore complete all as specified and directed.
Supply and assembly for lowering, jointing and fixing in position borehole drilled of 150mm nominal dia PVC pipe (grade 10 Kg/Cm2) duly slotted/ribbed with slot size 1.5mmX 76 mm , ISI marked, with socket on the top of each bore, complete all as specified and directed.
Supply and assembly for lowering, jointing and fixing in position of 150mm nominal dia PVC bail plug, ISI marked, complete all as specified and directed by EIC.
M&L for washing the bore with compressed air for well development (pressure not less than 250 PSI & 400 cuft per minute capacity ) to improve porosity till clear water is achieved and taking out all the sedimentation silt,deposited at a distance exc 50m, complete all as specified and as directed.
Collection of litho sample at every 3 m of depth of the bore and packing (min 250gms) in polythene after drying and placing in a wooden sample box for preparation of litholog at time of boring as directed by EIC. (to be executed in presence of geologist) Rate will be inclusive of (i) Carrying out pump test for 1000 min duration with suitble submersible pump with proper arrangement to observe its discharge, drawdown, etc. (ii) Conducting slug test by injecting min 4000 leters clean water to assess its dissipiation rate. (iii) Preparation of basic data hydroscientific report of each recharge well by compilation of its drilling history litholog, well design, aquifer parameter, quality, etc. for maintenance of record and information.
M&L for pebbles of size 25mm to 40mm size, complete all as specified and as directed by Engr-in- Charge.
M&L for pebbles of size 8mm to 15mm size, complete all as specified and as directed by Engr-in- Charge.
M&L for Sand filling under floors or in foundations including watering and consolidation
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m and not exc 3 m in depth and getting out in any type of soil.
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, benching, bed block, cills like including weathering and slightly rounded etc including form work. complete all specified and directed.
Extra for forming fair finished channel 45 cm inner girth in cement concrete using extra cement including moulds mitred stopped ends etc. complete all as specified and as directed.
M&L for precast cement concrete 1:2:4 type C1 using 20 mm graded stone aggreagate as in landing , cover slab(for manholes, etc) chulla hoods, chajjas, water through, mangers shelves ansd similar articles complete all as specifeid and directed.
S&F Mild steel TMT bars 6 mm dia and over, upto and including 10mm dia,cut to length, bent to shape required, including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.
S&F Mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.
M&L for Cutting holes in brick walls in cement for inserting holdfasts & making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required
Supply only Liquid water proofing compound.
Surface dressing not exc 15 cm deep and averaging 15 cm deep and getting out in soft/loose of soil.
M&L for 100 mm thick Cement concrete type B-1 :2:4 (20mm graded aggregate) floor complete all as specified and directed
M&L for Forming contraction (Dummy) joints 65mm deepx10mm wide, filled with sealing compound grade 'A"
Supply and fixing 25mm bore galvanised steel water tubing medium grade' with all fitting and fixed to wall and floor, ceiling or laid in floors etc complete all as specified and directed.
Earth filling under floors, spreading, levelling in layers n.exc 25cm thick each incl watering & well ramming as specified.
Site clearance as in soft / loose soil complete all as specified and directed.
M&L for moorum/red bajri/earth filling in floors or paving/laid in Layers n exc 15cm thick, spread ,levelled and rammed including watering complete all as specified.
M&L for Hardcore (Broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
M&L for 40 mm thick cement concrete type B1-1:2:4 (20 mm graded aggregate) as in flooring even and smooth without using extra cement etc complete all as specified and directed.
M & L for 50 mm thick PCC 1:3:6 type C-1 using 20mm aggregate for plinth protection etc complete all as specified.
M&L for Steel work in tubular post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete.
M&L for 38 x 38 mm hollow squre tubular section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates (Fe 410-W(Gde E-250) quality-A ) etc complete all as specified and directed.
M&L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe -290 Gde E-165 complete all as specified
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long neck dia 16 to 20mm complete.
M&L for Pre-painted galvatume aluminium zinc coating 275 GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparing newly plastered surfaces of wall and applying three coat of white wash etc complete all as specified.
Dismantling of stone slabs, and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing un-serviceable tiles to store and rubbish off outside the defence land complete all as specified.
M & L for Except Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with Grey cement and no pigment including laiying over 30mm sand cusion complete all as specified and directed.
Demolition of RCC over head tank in all respect upto stagging ht of 21 mtr including all components such as dome, conical wall ring / tie beambracing, coloumns ( other than ground floor) including all scaffolding complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description
Demolition cement concrete as in floors complete all as specified and directed.
Supply & Fixing of 18 mtr Flag pole with top 150mm, bottom 410mm, Base plate 610x25mm & PCD 510mm, Thickness 4.4mm with pole accessories (Lantern carriage arrangement suitale head frame, steel wire rope 6mm, double drum winch and motor) including anchor plate and foundation bolt M28x12 set, Aviation light- 02 Nos, Dome,Foundation RCC work, PU paint and Indian National flag of size (12x18 ft)- 02 Nos with installation and transportation charges complete all as specified and directed.
Dismantling of floor,hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises.
M&L Granite (of any type) tile 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including and polishing screed bed or bedding layer of mortar 15 mm thick for laying floor finished in CM 1:4 complete all as specified and directed.
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .