Providing and Laying of UGD line and Improvements to road at Kali Ambarayi and Vishwesharayya nagar & Installation of Gym equipments in Ward No.11 Belagavi.

Providing and laying of UGD line and Improvements to road at Kali ambrai and Vishweshwarayya Nagar and installations of Gym equipments in ward no 11 Belagavi

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 3...

Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 10 m3)

Cost of Haulage Excluding Loading and Unloading - Case-1 : Surfaced Road - Taking output 10 t load and lead 10 km = 100 t.km

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 150...

Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plaster...

Mechanical Means -

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of ...

Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 14 m3)

Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and low...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

Tack coat on Bituminous surface - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface clean...

Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plaster...

supply and fixing of Bicycle Metal: All tubular steel of 2.5mm thickness are galvanised and zinc dipped joints are robotic welded. all welded joints are scalloped as necessary and welded to an approve...

supply and fixing of seated chest press metal- All tubular steel of 2.5mm thickness are galvanised and zinc dipped joints are robotic welded. all welded joints are scalloped as necessary and welded to...

Supply and fixing of HD Situp Station Metal:All tubular steel of 2.5mm thickness are galvanised and zinc dipped joints are robotic welded. all welded joints are scalloped as necessary and welded to an...

supply and fixing HD Squat Pushing metal- All tubular steel of 2.5mm thickness are galvanised and zinc dipped joints are robotic welded. all welded joints are scalloped as necessary and welded to an a...

supply and fixing of HD Health Walker Metal::All tubular steel of 2.5mm thickness are galvanised and zinc dipped joints are robotic welded. all welded joints are scalloped as necessary and welded to a...

Supply Fixing of Double Ski Walker Metal All tubular steel of 2 5 MM thickness are glavanized and zinc dipped Joints are Robotic welded All welded joints are scalloped as necessary and welded to an ap...