Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹3.3 Craccepted-aoc | ₹3.3 Cr | accepted-aoc |
Tender Value
₹3.6 Cr
EMD Value
₹5.5 L
Closing Date
16 Jun 2026, 10:00 pmClosed
Directorate of Municipal Administration
Puttaiah A E E
CONSTRUCTION OF BUSINESS STALLS FOR FOOTPATH VENDORS ON KALA MANDIR ROAD BEHIND THE UPCOMING STADIUM DEVELOPMENT BANDIGOWDA LAYOUT CROSS ROADS IN WARD NO. 5, V V NAGARA 21ST CROSS IN WARD NO. 8, 11TH CROSS IN WARD NO. 7, S.P. QUARTERS ROAD IN FRONT OF CARMELA CONVENT ROAD, NEHARU NAGARA MAIN ROAD TO KAYI SURESH HOUSE IN WARD NO. 19M ARCHANA NURSING HOME ROAD AND CROSS ROADS, KITHURU RANI CHANNAMMA CIRCLE TO JOIN KARASAWADI MAIN RIAD VIA HOUSING BOARD ROAD, BESAGARAHALLI RAMMANNA CIRCLE TO MDC CENTER, HOSAHALLI VENKATESHWARA TEMPLE TO KAVERI NAGARA ROAD DEVELOPMENT OF CC DRAINS IN WARD NO. 26 AND DEVELOPMENT OF AMBUJAMMA PARK IN WARD NO. 15 IN CMC LIMITS MANDYA.
DMA/2025-26/OW/WORK_INDENT54177
DMA/2025-26/OW/WORK_INDENT54177
Open
Other Works
Two Tender Document System(Two Cover)
DMA City Municipal Council Mandya
7 documents required · 7 mandatory
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Satisfactory completed, at least one similar road and drain development work of value not less than Rs. 183.00 Lakhs as prime contractor. (work indent No mentioned in workdone certificate it is Mandatory) (Excluding GST)
Executed in any one year for a continuous period of 12 months the following minimum quantities : Cement Concrete ( Plain , Reinforced) - 345.00 Cum, Construction of Granular Sub base - 270.00 Cum, Wet Mix Macadam - 2230.00 Cum, Asphalting ( Bituminous Concrete, Semi Dense Bituminous Concrete, Bituminous Macadam, Dense Bituminous Macadam) 1181.00 Cum, New Machine Holes/Rising 71.00 Nos of work as per the tender document
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded Availability by owning at least 50 of the required key and critical equipment for this work and the remaining 50 can be deployed on lease hire basis for all works provided, the relevant documents Excavator 01 Won, 01 No Rent, Tippers 02 No Own, 02 No Rent, Vibratory Roller/Soil Compactor 01 No Own, 01 No Rent. Water Tanker Chassis mounted With RC 01 No. (own) Asphalt Paver finisher 01 No. (own) Hot/Drum Mix Plant 01 No. (own) Concrete Mixer/Ajax 01 No. (Own) All Machinerys RC Card and Insurence Copy Must Uploaded
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. 728.63 Lakhs) ITR Filed Copy (Mentioning PAN)
Liquid assets and /or availability of credit facilities of no less than Rs. 110.00 Lakhs (estimated cash flow for 3 months of peak construction period)
Profit and Loss statement along with balance sheet for a period of 5 years (2021-22 to 2025-26) with UDIN of the Tenderer or Agency or Firm.
Shall Upload Company Registration Certificate Class-I above PWD Registered Valid Contractor License certificate
₹5,000
₹5.5 L
16 Jun 2026
15 May 2026
17 Jun 2026
15 Jun 2026
12 Jun 2026
CONSTRUCTION OF BUSINESS STALLS FOR FOOTPATH VENDORS ON KALA MANDIR ROAD BEHIND THE UPCOMING STADIUM DEVELOPMENT BANDIGOWDA LAYOUT CROSS ROADS IN WARD NO. 5, V V NAGARA 21ST CROSS IN WARD NO. 8, 11TH CROSS IN WARD NO. 7, S.P. QUARTERS ROAD IN FRONT OF CARMELA CONVENT ROAD, NEHARU NAGARA MAIN ROAD TO KAYI SURESH HOUSE IN WARD NO. 19M ARCHANA NURSING HOME ROAD AND CROSS ROADS, KITHURU RANI CHANNAMMA CIRCLE TO JOIN KARASAWADI MAIN RIAD VIA HOUSING BOARD ROAD AND SELECTED PLACES
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead I.No.3.5P.No.17, Vol-III
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge I.No.19.2.1P.No.186, Vol-II
Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plaster...
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...
Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Patching of Deep Potholes using WBM Gr l & SDBC Gr lI 25 mm thick: Patching of Deep Potholes 75mm thick by restoring the Granular Base course using material confirming to WBM Grade -I with type Sereen...
Patching of Shallow Potholes using SDBC Gr II 25 mm thick Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The Cost is inclusive of removing the...
Prime Coat over WMM/WBM (i) Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate o...
Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported t...
Tack coat on Bituminous surface Providing and applying tack coat with VG10 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned ...
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. I.No.2.11(h)P.No.18, Vol-I
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...
Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick ...
Supply and Fixing of Puppy Dog Rider / Elephant Rider / Horse Rider: " The product to match the colours,design, size, contours and aesthetics exactly as per the image attached. " As per NIUA Guideline...
Supply & Fixing of Two Seater See Saw: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "As per NIUA Guidelines, All products must be tested...
Supply & Fixing of A Swing:" The product to match the colours, design, size, contours and aesthetics exactlyas per the image attached. As per NIUA Guidelines, all components designed and manufactured...
Supply and Fixing of Merry Go Round DX: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " As per NIUA Guidelines, all products must be test...
Supply and Fixing of Creepy Crawly :" The product to match the colours, design, size, contours and aestheticsexactly as per the image attached. " As per N I U A Guidelines, all components designed a n...
Supply Fixing of 150 CM Slide: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidelines, all products must be tested and certi...
Supply & Fixing of Muli Play System " The product to match the colours, design, size, contours and aestheticsexactly as per the image attached. " As per NIUA Guidelines, all components designed and ma...
Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 5...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
M Sand (P.No.A-44, I.No.64 Vol-l, SR 2023-24)
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for all Foundation works.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates The granite/trap/basalt crushed graded coarse aggrega...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates,The granite/trap/basalt crushed g...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...
Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screwsat an interval of 300 mm as required. 30mm( Vol-6 P.No3 I.No/1....
Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box( Vol-6 P.No 2 /1.5.1)
Supplying ......way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws 6 to 10 Way Gang Box ( Vol-6 P.No 2 /1.5.1)
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293.( Vol-6 P.No 9 /3.6) 6A One Way Switch(8/3.6.1)
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293.( Vol-6 P.No 9 /3.6 6A Three Way socket(8/3.6.3)
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casin gcapping using 2x1.5Sqmm(Phase&Neutral) &1x1.0 sqmm(Earthwire)FRL Smulti strand PVC nsulated copperwire (confirm...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casin gcapping using 2x1.5Sqmm(Phase&Neutral) &1x1.0 sqmm(Earthwire)FRL Smulti strand PVC nsulated copperwire (confirm...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifiedIS ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifiedIS ...
Supplyingof .....feet-PVCBattenwith integratedLEDtube ....W withhigh quality diffuserwithLifeof25000 burninghours&70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz&Power factor 0.9 al...
Fixingall typesandall capacitiesof fluorescent /falseceiling/ spot light/CFL/LEDfittingsindooronthewall/ceiling/rafters/girders using 23/0.0076" twintwistedPVCinsulatedwires, requiredNosof round block...
Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each (ESCOM 2023-24 SR VOL-6 P.No 22, I.No.51.02)
Good Quality Salt for grounding purposes packed in 50 Kg gunny bag (ESCOM 2023-24 SR VOL-6 P.No 22, I.No.51.03)
Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal connected to equipment gr...
GI/Copper strips for grounding connections, usingnecessary fixing materials as required. 25 x 6 mm GI strip ( Vol-6 P.No 54 /12.58.3)
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates,The granite/trap/basalt crushed g...
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand(2023-24 CSR VOL-2 P.No 09 I.No.5.2)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to ...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin ing, including cost of materials, labour, curing as per ...
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle gr...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in cluding water thinnable priming coat with cement primer after t...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing white vitreous china water closet squatting pan (Indian type)Orissa pattern W.C. pan of size 580 X 440(2023-24 SR VOL-2 P.No134 I.No. 14.13.2)
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing brass bib cock of approved quality 20 mm nominal bore (2023-24 SR VOL-2 P.No 117 I.No.13.2.2)
Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW_4_54177.doc
Tender Document • 1.85 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .