Construction of FTI Room with renovation of old CVOR building at Jalalabad (Shahjahanpur), Uttar Pradesh. SH-Electrical Work

Amount

SITC of 40 KVA Servo voltage Stabilizer with 3-Phase input & 3-phase output, 50 Hz frequency, Input voltage Range 340-480V & output voltage 415V, Oil cooled, unbalance type, Linear type with roller carbon including Hi-Low cutoff, surge protection, single phase ing & reverse Phase protection metering of input-output voltage, current etc. Providing 5 Years warranty.

SITC of 5 Star energy saving rating 1.5 TR Split type Inverter air conditioner fitted with high EER twin rotory compressor operating on refrigerant R410A, cooling capacity (W) : Min. 5100, copper condenser coil, for wall mounting with cordless remote, suitable for operation on 230V, 50Hz, single phase A.C. supply, capable of performing following functions. Cooling, Dehumidifying, Air Circulating, Filtering, Ventilation etc. complete as required including all mounting arrangements on wall/floor of outdoor & indoor units with refrigeration pipes, insulation and cable upto 3 mtr.

Supply of single phase 50 W, 1200 mm sweep, 330 rpm, double ball bearing, with canopy, downrod, 5 star energy saving ceiling fan, complete, etc. as required.

Supply of single phase 300 mm sweep, 900 rpm speed heavy duty exhaust fan with proper electrical connection, complete as required, etc.

Supply of LED 600x600mm type recess mounting indoor Luminaire fitting having power consumption approx 24 Watt and lumen output minimum 3000 lumens single piece integral metallic CRCA powder coated.

Supply of LED batten 20 watt 2000 lumen with mounting accessories as per AAI approved make.

Supply of LED batten 10 watt 1000lumen with mounting accessories as per AAI approved make.

Supply of 40 watt all-in-one solar powered LED street light system with die cast aluminium housing with heat resistant toughened glass & IP 65 protection with thermal management, mono crystalline solar panel, lithium ferro phosphate battery of 12V and 27Ah, MPPT charge controller, automatic power management, LED driver efficiency >93%, High Power LEDs with efficacy of more than 170 lm/watt having 6800 lumen pack and CRI >70%, CCT-5700-6500K, Solar Module Wp-60 and 3.33A max. current, operating temperature -30º C to +45º C, IP65 complete as required with minimum five years warranty including that of battery.

Supply of 6 Mtr high grade hot deep galvanized steel lighting mast type pole. Top dia 70mm and bottom dia 130mm, polygonal, tappered, flang mounted type, totally hot dip galvanized in one section with no circumferential weld including supply of foundation bolts, anchor plates and accessories for 6 Mtr pole.

Supply of following size XLPE insulated Aluminium conductor, armoured underground power cable of 1.1 KV grade, confirming to IS 7098 (Part - I) with upto date amendment. 3.5x 50 sq.mm

Supply of following size XLPE insulated Aluminium conductor, armoured underground power cable of 1.1 KV grade, confirming to IS 7098 (Part - I) with upto date amendment. 3.5x 25 sq.mm

Installation, testing and commissioning of LED Luminaire of all types, complete with all accessories directly on ceiling/wall / recess on false ceiling, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, Testing and Commissioning of all-in-one solar powered 40W LED street light system on the existing 6m high polygonal pole as per manufacturer recommendations.

Installation of 6 Mtr high steel lighting mast type pole polygonal, tappered, flang mounted type with existing foundation bolts, anchor plates on PCC Foundation as per manufacturer recommendations.

Supplying and fixing following rating, four pole, 415 V, 10 kA, "C" curve MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) 63 A

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 35 sq. mm and upto 95 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 50 sq. mm (35mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 25 sq. mm (28mm)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 32 mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 3 Module (100mm X 75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 4 Module (125mm X 75mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supply, Installation, Testing and Commissioning of Silent and Compact outdoor type Diesel Generator Set of minimum 30KVA (24KW) capacity, 38 BHP, 42 Amps, 415V, 3 Phase, 1500 RPM and suitable indoor type AMF Panel (i/c AMF Panel stand) along with battery and leads, fuel pipe line, exhaust pipe line, AVM pads, in-built fuel tank, radiator, residential silencer, Acoustic Enclosure, electronic/microprocessor controller, battery, first fill of lub oil, spares, tools, documentations and accessories, necessary civil foundations and supply of two B-Check Kits & lub oil etc. complete as required as per follwings and particular specifications. Deisel Engine - 38 BHP, four stroke, 4 cylinders, water cooled, turbocharged with mechanical governer, 12V Electrical Starting System, microprocessor based controller & display for monitoring the DG performance and fault finding. Alternator - 415V, 42 Amps,3 phase 4 wire system,1500 RPM / 50Hz with +/- 1% voltage regulation, AVR, Class H insulation , IP 23 protection. Acoustic enclosure - Modular construction made of 16 gauge CRCA sheets insulated with fire retardant foam to meet noise level less than 75 dBA@1mtr sound levels. AMF Panel - Made of 2 mm thick powder coated CRCA sheet , suitable for 30KVA DG set for Control in auto and manual mode including all relays, timers, power contactors, MCCBs, meters, CT's, transducers, automatic battery charger related busbars, cables, control wiring and all accessories.

SITC of 100 A, 415V, four pole heavy duty On-Load Change Over Switch (back to back type) with sheet steel enclosure, complete with handle assembly having door interlock and padlocking arrangement on the wall etc. complete as required.

Earthing with Copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm Copper strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm Copper strip on surface or in recess for connections etc. as required.

Manish Electricals

SAURABH ENTERPRISES