Composite work of Core Infrastructure development for Integrated Digital Trunking Wireless Network (IDTWN) for BARC, Trombay, Mumbai.

Amount

Main Power Cable SITC of 4 Core 16 Sq.mm. Aluminium Conductor XLPE insulated, GI wire armoured FRLS grade PVC sheathed Power cable as per clause no. 1 of Technical Specification in Section (A)

Power cables to be laid underground as per clause no. 1 of Technical Specification in Section (A)

Power cables to be installed on wall/beam/ceiling as per clause no. 1 of Technical Specification in Section (A)

End Termination as per clause no.2 of Technical Specification in Section (A)

Power DBs as per clause no.3 of Technical Specification in Section (A)

6 way VTPN Power DB as per clause No. 3.1 of Technical Specification in Section (A)

6 way PPI DB for emergency load as per clause no. 3.2 of Technical Specification in Section (A)

UPS of following capacity and Battery Back Up as per clause no.4 of Technical Specification in Section (A)

10 KVA UPS with 2 Hour Battery Back Up as per clause no.4.1 of Technical Specification in Section (A)

5 KVA UPS with 30 minutes Battery Back Up as per clause no.4.2 of Technical Specification in Section (A)

Earthing Station as per clause no. 5 of Technical Specification in Section (A)

Earthing Conductors as per clause no. 6 of Technical Specification in Section (A)

Power Points

Power Points for AC as per clause no. 7.1 of Technical Specification in Section (A)

Power point wiring with power boards suitable for DLP Trunking for PC as per clause no. 7.2 of Technical Specification in Section (A)

Power Points (1-16A+2 -6A) for accessories/instruments/rack as per clause no. 7.3 of Technical Specification in Section (A)

5 Amps Power point with wiring as per clause no. 7.4 of Technical Specification in Section (A)

Primary Lighting point wiring as per clause no.7.5 of Technical Specification in Section (A)

Secondary light point wiring as per clause no. 7.6 of Technical Specification in Section (A)

AC Timer as per clause no.8 of Technical Specification in Section (A)

Lightning Receivers as per clause no. 9 of Technical Specification in Section (A)

150 x 50 mm size DLP trunking as per clause no. 10 of Technical Specification in Section (A)

LED Lighting Fixture as per clause no. 11 of Technical Specification in Section (A)

600 x 600 mm lighting fixtures as per clause no. 11.1 of Technical Specification in Section (A)

Bulk Head LED fixture as per clause no. 11.2 of Technical Specification in Section (A)

Exit Sign board as per clause no. 11.3 of Technical Specification in Section (A)

Wall mount Fan as per clause no. 12 of Technical Specification in Section (A)

Exhaust Fan as per clause no. 13 of Technical Specification in Section (A)

Temperature & Humidity Sensor as per clause no. 14 of Technical Specification in Section (A)

CCTV system with 3 cameras as per clause no. 15 of Technical Specification in Section (A)

2 Loop Fire Alarm Panel rack mounted type as per clause no. 16 of Technical Specification in Section (A)

Multi Sensor detector as per clause no. 17 of Technical Specification in Section (A)

Sounder cum flasher as per clause no. 18 of Technical Specification in Section (A)

MCP as per clause no. 19 of Technical Specification in Section (A)

RI as per clause no. 20 of Technical Specification in Section (A)

Fire alarm cabling 2CX 1.5 Sq.mm. as per clause no. 21 of Technical Specification in Section (A)

Network Rack 42 U with platform as per clause no. 22 of Technical Specification in Section (A)

Patch Panels as per clause no. 23 of Technical Specification in Section (A)

LAN Cabling with cat-6 cables as per clause no. 24 of Technical Specification in Section (A)

3 Port I/O as per clause no. 25 of Technical Specification in Section (A)

Single I/O as per clause no. 26 of Technical Specification in Section (A)

20 pairs Telephone Krone connectors with Base as per clause no. 27 of Technical Specification in Section (A)

20 pair PIJF telephone cable with 2 termination as per clause no. 28 of Technical Specification in Section (A)

Conduit 25 mm as per clause no. 29 of Technical Specification in Section (A)

Casing-caping 25 x 12.5 mm size as per clause no. 30 of Technical Specification in Section (A)

M.S. Item as per clause no. 31 of Technical Specification in Section (A)

M.S. Box as per clause no. 32 of Technical Specification in Section (A)

Excavation as per clause no. 33 of Technical Specification in Section (A)

Soft soil as per clause no. 33 of Technical Specification in Section (A)

Murrum as per clause no. 33 of Technical Specification in Section (A)

hard Rock as per clause no. 33 of Technical Specification in Section (A)

PCC Work as per clause no. 34 of Technical Specification in Section (A)

HDPE Pipe 50 mm dia for telephone cable as per clause no. 35 of Technical Specification in Section (A)

Shahabad tile removal and re-making as per clause no. 36 of Technical Specification in Section (A)

24 Port LIUs as per clause no. 37 of Technical Specification in Section (A)

Splicing of 24 Port Optical Fibre cables as per clause no. 38 of Technical Specification in Section (A)

Diversion of existing 24 Core optical Fibre cable as per clause no. 39 of Technical Specification in Section (A)

Straight Joint of Optical Fibre cables as per clause no. 40 of Technical Specification in Section (A)

SITC of 24 core Optical Fibre cables as follows as per clause no. 41 of Technical Specification in Section (A)

Through new HDPE Pipe as per clause no. 41 & 41.1 of Technical Specification in Section (A)

on wall as per clause no. 41 & 41.2 of Technical Specification in Section (A)

Supply, installation, testing and commissioning of Air Conditioning equipments of following nominal capacities as per clause no. 1 of tender technical specification in Section (B).

High wall mounted type Split Air Conditioners of 2TR Nominal capacity

High wall mounted type Split Air Conditioners of 1.5TR Nominal capacity

Copper tubing: Supply and installation of refrigeration quality copper tubing of minimum 24 gauge thick along with sleeve type insulation wrapped with monsoon tape required for installation of split air conditioners of following capacities at site as per clause no. 2 of technical specification in Section (B). NB: Each running meter of copper tubes will consist of one meter each of suction and discharge line together along with insulation.

Copper tubing for Split type air conditioners of 2TR Nominal capacity

Copper tubing for Split type air conditioners of 1.5TR Nominal capacity

Condensate Drain Piping: Supply and laying of condensate drain pipe (Rigid OR flexible) as per clause no. 3 of technical specification in Section (B).

PVC Trunking: Supply and installation of casing - capping (PVC trunking) of 100 x 50 mm size for enclosing refrigeration tubing, condensate drain piping and electrical cable as per clause no. 4 of technical specification in Section (B).

Electrical Cable: Supply, laying and termination of 4C x 2.5 sq. mm size electrical cables comprising of fire retardent PVC insulated copper conductor as per clause no. 5 of technical specification in Section (B):

MS Structure: Supply, fabrication & fixing of stands and structures (size depending as per site condition) made out of mild steel of appropriate grade completely painted with black colour as per clause no. 6 of technical specification in Section (B).

Condensed type non-pressurised fire extingushing aerosol generator: Supply and installation of condensed type non-pressurised fire extinguishing aerosol generator along with thermal sensor for automatic activation in the temperature range of 93⁰C to 180⁰C in enclosure of approximately 0.08 m³ volumes of split air conditioners as per clause no.7 of technical specification in Section (B).

Service Desk (3000x600x750) as per clause no. 1 of technical specification in Section (C)

Service Desk (3700x600x750) as per clause no. 1 of technical specification in Section (C)

Service Desk (2000 x 600 x 750) as per clause no. 1 of technical specification in Section (C)

Service Desk (3700x600x750) as per clause no. 2 of technical specification in Section (C)

Service Desk (1200 x 600 x 750) as per clause no. 3 of technical specification in Section (C)

Drawer with Lock & Key and Castor wheel (400 x 400 x 600) as per clause no. 4 of technical specification in Section (C)

Chair with (Arm + Head) rest adjustable height & tilt control as per clause no. 5 of technical specification in Section (C)

Storage with drawers (1200 x 600 x 750) as per clause no. 6 of technical specification in Section (C)

Almirah (2000 x 900 x 500) as per clause no. 7 of technical specification in Section (C)

Passive Components for Networking as per clause no. 8 of technical specification in Section (C)

12U Wall Mount Double section Rack With std accessories

3 Mtr cat-6 Patch Cord

1 Mtr cat-6 Patch Cord

5 Mtr cat-6 Patch cord

LC-LC 5Mtr

LC-LC 10Mtr

305 Mtr Cat6 Cable Box

Fully loaded 12 port LIU

Antenna Tower (as per clause no. 1 of Technical Specification in Section (D))

15 Mtrs Self Support 180 Kmph wind speed 780 Top & 1230 Bottom tower with 2 working platforms, Ladder & Safety Case. (Material, Fabrication, Galvanizing, Paint,16 dia Copper Lightning Arrestor*2, IS code earthing*2, 25x3 mm GI Earth Strip from Top to bottom with plated*2, Single LED Aviation Lamp with Sensor Cost).

20 Mtrs Mono pole Tower (as per clause no. 2 of Technical Specification in Section (D))

From 0.00 to 1.50 m depth from Average Ground Level

From 1.50 to 3.00 m depth from Average Ground Level

From 0.00 to 1.50 m depth from Average Ground Level

From 1.50 to 3.00 m depth from Average Ground Level

Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc. Note :- Deductions for voids shall be made from truck measurements for soil @ 20% from corresponding stack/truck measurement.

For soil

Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) / M10 with minimum cement content 220 Kg/CuM including consolidation, finishing, curing etc. complete as per specifications and drawings but excluding the cost of Form work shuttering, centering Complete at all levels

Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) / M15 with minimum cement content 320 Kg/CuM including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels

Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.

In substructure (at plinth level & below).

Extra for RCC / PCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants .

Providing, centering, shuttering, Form work using PVC Film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, propping, staging, supports etc. and deshuttering the same after the specified time all as per drawings and specifications at all levels.

In substructure

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. "Using TMT bars of specified grades all dia. bars TMT bars confirming to IS 1786. All test reports to be provided along with the supply of the materials."

Steel Supplied by the Contractor Using TMT Bars of grade Fe 500D of all size bars.

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge. Notes : 1. The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also third party testing from approved laboratories with out any extra cost. 2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates. 3. Welding Electrodes manufactured by M/s. Advani Oerlicon / ESAB India & D& H of specified suitable grade only shall be used. 4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. 5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.

Up to and including 300 mm Joists, 350 mm channels, and below sections using materials of approved manufacturers to confirming to IS 2062. All test reports to be provided along with the supply of the materials.

Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc. including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc. including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Notes : 1. The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also third party testing from approved laboratories with out any extra cost. 2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates. 3. Welding Electrodes manufactured by M/s. Advani Oerlicon / ESAB India & D& H of specified suitable grade only shall be used. 4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. 5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.

Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including applying a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge. Notes : 1. The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also third party testing from approved laboratories with out any extra cost. 2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates. 3. Welding Electrodes manufactured by M/s. Advani Oerlicon / ESAB India & D& H of specified suitable grade only shall be used. 4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. 5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.

Supplying, fabricating and delivering and fixing at site MS anchor bolts as shown in drawing or as directed by Engineer-in-charge, including nuts/lock nuts, anchor bolt assemblies etc. complete.

Providing and constructing Random Rubble masonry using spotless black trap or approved local stone in foundation and plinth in C.M 1:6 (using 100% Manufactured Sand) including raking out joints or simultaneous flush pointing below ground level / plinth level, including levelling the masonry with cement concrete 1:6:12, curing etc. complete as per drawings and specifications.

Providing and fixing 75 mm thick Non Asbestos Fiber Reinforced Aerated Cement / Expanded Polystyrene (EPS) Concrete Sandwich wall panels of bulk density of 690 - 876 kg/cum of approved manufacturers , made out of Light Weight Fiber Reinforced Aerated Cement Concrete Core Composed of Portland Cement, Fly Ash Binders etc. / Expanded Polystyrene (EPS) Concrete core and 4 to 5 mm thick Non Asbestos Fiber Cement Boards on either Side of the Core having a Tongue and Groove joint on Longitudinal side of the Modules. These panel Modules are to be erected / Installed using Galvanised Iron Steel Tracks of suitable section as per manufacturers specification at bottom and Top of the Wall respectively, including all necessary material required for erecting and fixing the Wall Panel complete as per the directions of the Engineer in Charge. For permanent and exterior joints the paste of Sodium Silicate and Fly Ash / Cement to be applied at Tongue and Groove Interlocking Joints and on exposed joints with Acrylic Putty and Fiber Tape on both sides all as per design, drawing and specification and as directed by Engineer-in-Charge. Notes: 1. Structural steel used for support if any required shall be paid in relevant item. 2. Necessary cut-outs for Doors & Windows shall be made in the wall paneling. The rate shall be inclusive of all materials & Labour required for making cut-outs and additional GI channel frame work. No deductions will be made for the cut-outs for measurement purpose.

Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Fly ash / Fly ash Lime bricks with minimum 70 kg / Sq. cm strength of approved make and size in Sub structure including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.

Providing 20 mm thick External plastering in two coats under layer 12 mm thick with C.M 1:4 (using crushed sand) finished with a top layer 8 mm thick in C. M 1:3 (using crushed sand) including approved water proofing compound @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, scaffolding up to 10 meters height, finishing, curing etc. complete as per specifications. and as directed by the Engineer-in-charge

Providing and fixing Glazed VITRIFIED floor tiles /skirting tiles of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge. Using Tiles of size 600 X 600 mm

Add Extra for polymer mortar in place of cement mortar for skirting Vitrified tiles

Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

Labour charges for mmurrum filling under floors of specified thick in layers of not exceeding 150 mm thickness including consolidation etc. complete (using mmurrum available at site in side BARC)

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P brass / stainless screws all complete as per drawings and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealant etc. (fittings glazing and paneling shall be paid for separately)

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for colour anodizing

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc. with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 6.00 mm thickness

Providing and fixing in position suspended false ceiling using G.I. exposed ceiling suspension system of grid size 600mm x 600mm with main runner 38mm x 24mm, Cross Tee 27mm x 24mm and wall angle 22mm x 24mm. Using 4mm thick ( High pressure steam cured), pre-painted, self-embossed, reinforced designer cement boards (Ivory) of Lake and Hill/Oceanic/Cascade/Electra texture, conforming to IS 14862:2000 Type B Category III, to be placed in a grid of G.I. system duly suspended with 3m dia G.I./M.S bar hanger fixed with steel dash fasteners or iron Purlins from the roof with adjustment clip. The main runners to be secured to structural soffit by hanger @ 1200mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1200mm Cross Tee to be interlocked between main runners @ 600 c/c so as to form 600mm x 600mm or grid. Provide provisions for light fixtures, air conditioning ducts and diffusers, fire alarms, sprinklers or smoke detectors etc. as per the drawing and directions of engineer in charge.

Providing and fixing FRP door shutters flush door / paneled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws aluminium Bow handles, 2 Nos of Aluminium 75 mm Baby latch complete all as directed at by the Project Engineer. 35 mm thick paneled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws.

Providing and fixing anodised aluminium aldrops ISI marked of size 300 X 16 mm transparent or dyed to required colour or shade with necessary screws etc. complete as directed by the Engineer-in-charge

Providing and fixing anodised aluminium tower bolts of size 300 X 12 mm (barrel type) ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc. All as per specifications and as per drawings.

Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.

Providing, painting, finishing walls with two coats of anti-algae, weather proof acrylic smooth emulsion paint of approved make with silicon additives on sand face plaster/ plain plaster & concrete surfaces of required shade over new work over a base coat of exterior cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat. Including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Supplying, fabricating, testing, transporting, handling and erecting at required positions and levels metal roofing and canopy roofing including flashings and insulation etc. as per approved drawings and design complete as directed by the Engineer-in-charge including all consumables comprising of the following: Double skin insulated standing seam roofing system comprising of 0.50 mm thick colour coated / bare Al-Zinc Alloy coated steel 0.50 mm with overall width of 400 to 500mm by seaming for 100% water tightness on outer face and 0.50 mm thick inner linear sheet with galvalume sheet profile and physical material properties as specified. These sheets shall be fixed on specially reinforced polyamide or acetylate anti friction di electric brackets at every location for permitting unhindered, free sheet movement at all required locations. The profile shall have a special in built drainage joint at side laps to make it fully watertight even in fully submerged condition. It shall have overall depth of 100 mm from horizontal after fixing . The side laps shall be of interlocking type without requirement of any mechanical seamer. Insulation: This shall be comprising of two layers of Rockwool insulation each of 50 mm thick with density of 48 kg / Cu. M. Sub Grit (Top Hat) 1.5 mm thick Glavanised steel hat section fixed to main purlins, above first layer of insulation, to support the aluminium sheets. Inner linear sheet of 0.50 mm nominal TCT of physical material properties as specified. Vapour Control layer : The vapour control layer to reduce the movement of water vapour from inside the building through the roof construction to reduce the risk of condensation shall consists of 3 layer membrane to be laid continuous across its surface shall be fully sealed at laps, perimeters, penetrations to ensure effectiveness & aluminium foil of 0.50mm thick laid over insulation board.

Providing and fixing precoated Galvalume roofing accessories using self drilling / self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete.

Roofing accessories of galvalume sheet above 600mm total width up to 1200 mm for ridges, gutters, aprons and flashings

Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate

Providing and fixing 4 Lever Mortice Lock of approved make suitable for aluminium sections

TECHNOCRATS SECURITY SYSTEMS PVT LTD

SWASTIK ELECTROTECH PVT LTD