Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹38.0 LAccepted-AOC | ₹38.0 L | 1 | Accepted-AOC LOA Issued |
| 2 | 2₹42.1 L+₹4.1 L (10.8%)Rejected-Finance PLOT NO 17 NEAR POLICE REST HOUSE GROUND FLOOR PALAM ROAD SECTOR 22 GURUGRAM GURUGRAM HARYANA 122015 | GURUGRAM | GURUGRAM | HARYANA | 122015 | ₹42.1 L+₹4.1 L (10.8%) | 2 | Rejected-Finance 2 |
| 3 | 3₹48.8 L+₹10.7 L (28.2%)Rejected-Finance BUILDING NO 37 MOHAN RAM MANDIR TIGRA VILLAGE GURUGRAM 2024R18309 | GURUGRAM | GURUGRAM | HARYANA | ₹48.8 L+₹10.7 L (28.2%) | 3 | Rejected-Finance 3 |
| Sl No | Description | Qty | Unit | THE VENKATESHWARA COOPERATIVE LABOUR & CONSTRUCTION SOCIETY LIMITED GURUGRAM L2 | THE BHAVYA CO-OPERATIVE LABOUR AND CONSTRUCTION SOCIETY LIMITED L3 | The JS Cooperative Multipurpose Society Limited Gurugram L1 |
|---|---|---|---|---|---|---|
| 1.00 | Providing and fixing public information board consisting of 75 mm G.I. Pipe of size 2.45 metre x 1.15 metre with 900 mm x 900 mm G.I. Sheet 16 gauge connected/welded with 5 mm thick steel plate of 50 mm duly painted as per column mention in drawing and fixing at site in 60 x 60 x 75 cms cement concrete in 1:2:4 block complete in all respect | 4 | Nos. | 11,300 ₹45,200 | 12,000 ₹48,000 | 9,990 ₹39,960 Lowest |
| 2.00 | Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of m.s pipe 2” and ¾” and vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer and PU Paints. Complete item with GST, Transportation, Installation with C.C and labor at site. | 2 | Nos. | 15,000 ₹30,000 Lowest | 19,000 ₹38,000 | 15,908 ₹31,816 |
| 3.00 | Air Swing: Providing designing and fixing air swing in pair of size 1150 x 900 x 1250 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational | 1 | Nos. | 25,000 ₹25,000 | 30,000 ₹30,000 | 24,000 ₹24,000 Lowest |
| 4.00 | NS Item = Supply of RH Pipe 1` dia. | 180 | Metre | 150 ₹27,000 | 200 ₹36,000 | 140 ₹25,200 Lowest |
| 5.00 | Providing and fixing 3/4`dia Hydrant connection | 30 | Nos. | 600 ₹18,000 | 650 ₹19,500 | 500 ₹15,000 Lowest |
| 6.00 | -Pull Chair and Push Chair ( Two in one )
1. Dimensions (LxWxH) 1800 x 700 x 1800mm.
2. Fabricated with main post of NB 100mm (G.I) `C` Class
pipe of approved make.
3. Seat main frame of NB 50 mm (G.I.) `C` Class pipe,
Pipe connecting main post with handle frame of NB 65mm
(G.I.) `C` Class pipe.
4. Handle frame of pipe NB 32mm and NB 25mm (G.I.) `C`
Class.
(NB stands for nominal bore i.e. internal diameter of
pipe in millimeters.
5. All pipes are powder coated with 80-120 micron thick
akzo Nobel or equivalent paints.
6. All joint of pipe are robotic welded with joints scalloped
as necessary and dressed of removing sharp edges and
burrs.
7. Zinc primer paints is applied at all the welding points
prior to finishing.
8. Handle bars are provided with high end quality rubber
grips.
9. Base plate cover made of virgin LLDPE plastic by
rotational molding with minimum 4.00mm thickness UV
resistant and colored.
10. Seat to be made up from virgin LLDPE manufactured
by rotational molding with 4.00mm thickness, coloured, UV
resistant and environment friendly.
11. Maintenance free bearings of SKF or equivalent make
duly oil sealed and self-lubricated are used in the
Each NSADRate 5.00 32,400.00 162,000.00
Work Name Work Code Sub Division Estimate
Amount
Lumpsum
Amount Total Amount
Renovation and Beautification of 10 Nos Parks of
Sector-9A and Chath Pooja Ghat of Ward no. 14 Zone 1
MCG
GUR01220210412230
155
Gurgaon 17414401.22 0.00 17414401.22
equipment manufactured.
12. The equipment are fitted with inbuilt limiters to prevent
unwanted movements.
13. The equipment is fixed on ground with concrete of
minimum strength M-25 and J shaped welded bolts of
18mm thickness.
14. Once the concrete is set, the equipment is fixed on to it
and nuts and bolts are covered with base plate cover.
15. High tensile steel with galvanized nut bolts are used for
assembly.
16. Equipment made to GS mark, EN16630, DIN 79000 and
ISO 14001 international standard for outdoor fitness
equipment.
17. Self-explanatory stainless steel label fixed on
equipment for ease of use.
The rates are inclusive of all taxes like GST, transportation | 1 | Each Set | 30,000 ₹30,000 | 35,000 ₹35,000 | 26,000 ₹26,000 Lowest |
| 7.00 | Providing and fixing of Gate valve for hydrant connection | 30 | NO. | 300 ₹9,000 Lowest | 450 ₹13,500 | 300 ₹9,000 Lowest |
| 8.00 | Dips/ Chin Up/ Push Ups ( 3 in One Machine ) :- 1.
Dimensions (LxWxH) 1400 x 1200 x 2100mm. 2.
Fabricated with main post of NB 50mm (G.I) `C` Class pipe
of approved make. 3. Main frame of NB 50mm (G.I) `C`
Class Pipe. 4. Leg support of NB 32mm (G.I) `C` Class
Pipe and other support of NB 25mm (G.I) `C` Class Pipe.
(NB stands for nominal bore i.e. internal diameter of pipe
in millimeters). 5. All pipes are powder coated using akzo
Nobel or equivalent paints of 80-120 micron thick . 6. All
joint of pipe are robotic welded with joints scalloped as
necessary and dressed of removing sharp edges and
burrs. 7. Zinc primer paints is applied at all the welding
points prior to finishing. 8. The equipment is fixed on
ground with concrete of minimum strength M-25 and J
shaped welded bolts of 18mm thickness. 9. Once the
concrete is set, the equipment is fixed on to it . 10. High
tensile steel with galvanized nut bolts are used for
assembly. 11. Equipment made to GS mark, EN16630,
DIN 79000 and ISO 14001 international standard for outdoor
fitness equipment. 12. Self-explanatory stainless stell lable
fixed on equipment for ease of use. The rates are inclusive
of all taxes like GST, Transportation, Installation at site
complete in all respect to full satisfaction of engineer in
charge complete in all respect. | 1 | Each Set | 24,220 ₹24,220 Lowest | 28,000 ₹28,000 | 25,000 ₹25,000 |
| 9.00 | texmo motor | 1 | Each | 9,000 ₹9,000 Lowest | 10,000 ₹10,000 | 9,200 ₹9,200 |
| 10.00 | TECHNICAL SPECIFICATIONS and DRAWINGS OF FENCE
Specifications for ROW Greenbelts: Height 1500 mm
S. No. Product/Description
Item 1: Fence as per drawing /assembly:
All system components as below will be fitted to provide the fence as given in the assembly drawing.
The installation will be done as per the civil construction details given in the drawing for grouting the
fence post.
1 Weld Mesh Panels with Fitting Accessories:
(a). Weld Mesh Panels:
i. Weld Mesh Panels manufactured with electrical resistance welded galvanized wires and
subsequently powder coated as per specifications mentioned under.
ii. Weld mesh panel for fence will meet the standards of IS 1566/ IS 4849 with the following
key specifications apart from the other points in the governing specification:
iii. Panel size: 2500 mm X 1500 mm (W x H). Tolerance of plus / - 2 %
iv. Mesh Size: 50 mm X 150 mm (W X H). Tolerance of plus / - 2 mm.
v. Weld Shear strength: Minimum 50 % of the breaking strength of the smallest wire (In
this case the vertical wire)
vi. Mesh Wire: Galvanized MS wire
Horizontal wire, Dia. 5.0 mm ( plus /- 0.05mm): Vertical wire, Dia. 5.0 mm( plus /-0.05mm)
Tensile Strength of wire: Min 500 N/sq.mm: Specification for wire: IS 280
vii. Galvanizing of wire: 100 – 120 GSM as per IS 4826 (Measurement as per IS 6745)
Uniformity of Coating: As per IS 2633: Adhesion test for coating: As per IS 2629 (1985)
viii. Powder Coating: The galvanized panels are subsequently single powder coated after
welding with a thickness of 60 to 80 microns.
ix. Powder Coating Make : Akzonoble / Jotun.
x. Color: RAL 6005 (Military Green): Coating Standard: EN 10245-1/ IS 13871
xi. Other coating requirement: Powder coating should withstand 720 Hours of salt spray test
as per ISO 12944, 1000 hrs of QUV-B Weatherometer Test, Adhesion test,
Electrochemical Impedance Spectroscopy Test (Type Test Certificate for the coating
standards from renowned Laboratories clearly indicating that the coating passes C3 or
higher corrosion protections standard is to be submitted by the bidder along with technical
bid).
xii. Refer drawing of Panel, attached herewith. 25 mm pointed wires should be left on both
sides (top and bottom only), V-band range: 100 mm to 110 mm
xiii. Qty: 400 Panels / KM
(c) Mushroom Head Bolts with security nuts:
i. Each Omega clamp shall be supplied with two sets mushroom headed bolts with security
nuts and washers.
ii. Material: SS 304
iii. Size: M8 X 25 mm
(i) Qty: 3208 nos. / KM
Fence Post and accessories
(a) Fence Post
i. Type: Square Section.
ii. Specification: IS 1161-2014 (Medium Grade)
iii. Outer Dimension: 60 mm X 60mm plus /- 1 %
iv. Thickness: 2.60 mm plus /- 10% (Medium Grade)
v. Length: 2000 mm plus /- 2%
vi. Galvanization: 380 GSM
vii. Powder Coating: The Fence Post are subsequently single powder coated.
viii. Colour: RAL 6005 Coating Standard: EN 10245-1/ IS 13871
ix. Other coating requirement: Powder coating
Meter | 223.6 | Per Mtr. | 1,892 ₹4,23,051.2 Lowest | 2,000 ₹4,47,200 | 1,900 ₹4,24,840 |
Tender Value
₹45.1 L
EMD Value
₹90,200
Closing Date
2 Jun 2026, 12:00 pmClosed
Tushar Yadav
Municipal Corporation Gurugram
Renovation and beautification of Green belt of R-Block in Uppal SouthEnd Ward no.16 Zone-1, MCG.
2026_HRY_524353_1
202646F8188B 0C50 4E0E 90EE 7B15227EDA3A285ULB
Open Tender
Civil Works
Works
90 days
Gurugram
This work will be reserved only for Cooperative Labour and Construction Societies upto the rates allotted in the immediate past for similar nature of work.
2 documents required · 2 mandatory
₹2,500
₹90,200
Yes
30 Jun 2026
26 May 2026
2 Jun 2026
26 May 2026
2 Jun 2026
26 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing public information board consisting of 75 mm G.I. Pipe of size 2.45 metre x 1.15 metre with 900 mm x 900 mm G.I. Sheet 16 gauge connected/welded with 5 mm thick steel plate of 50 mm duly painted as per column mention in drawing and fixing at site in 60 x 60 x 75 cms cement concrete in 1:2:4 block complete in all respect | 4 | Nos. | - | - |
| 2 | Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of m.s pipe 2” and ¾” and vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer and PU Paints. Complete item with GST, Transportation, Installation with C.C and labor at site. | 2 | Nos. | - | - |
| 3 | Air Swing: Providing designing and fixing air swing in pair of size 1150 x 900 x 1250 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational | 1 | Nos. | - | - |
| 4 | NS Item = Supply of RH Pipe 1` dia. | 180 | Metre | - | - |
| 5 | Providing and fixing 3/4`dia Hydrant connection | 30 | Nos. | - | - |
| 6 | -Pull Chair and Push Chair ( Two in one )
1. Dimensions (LxWxH) 1800 x 700 x 1800mm.
2. Fabricated with main post of NB 100mm (G.I) `C` Class
pipe of approved make.
3. Seat main frame of NB 50 mm (G.I.) `C` Class pipe,
Pipe connecting main post with handle frame of NB 65mm
(G.I.) `C` Class pipe.
4. Handle frame of pipe NB 32mm and NB 25mm (G.I.) `C`
Class.
(NB stands for nominal bore i.e. internal diameter of
pipe in millimeters.
5. All pipes are powder coated with 80-120 micron thick
akzo Nobel or equivalent paints.
6. All joint of pipe are robotic welded with joints scalloped
as necessary and dressed of removing sharp edges and
burrs.
7. Zinc primer paints is applied at all the welding points
prior to finishing.
8. Handle bars are provided with high end quality rubber
grips.
9. Base plate cover made of virgin LLDPE plastic by
rotational molding with minimum 4.00mm thickness UV
resistant and colored.
10. Seat to be made up from virgin LLDPE manufactured
by rotational molding with 4.00mm thickness, coloured, UV
resistant and environment friendly.
11. Maintenance free bearings of SKF or equivalent make
duly oil sealed and self-lubricated are used in the
Each NSADRate 5.00 32,400.00 162,000.00
Work Name Work Code Sub Division Estimate
Amount
Lumpsum
Amount Total Amount
Renovation and Beautification of 10 Nos Parks of
Sector-9A and Chath Pooja Ghat of Ward no. 14 Zone 1
MCG
GUR01220210412230
155
Gurgaon 17414401.22 0.00 17414401.22
equipment manufactured.
12. The equipment are fitted with inbuilt limiters to prevent
unwanted movements.
13. The equipment is fixed on ground with concrete of
minimum strength M-25 and J shaped welded bolts of
18mm thickness.
14. Once the concrete is set, the equipment is fixed on to it
and nuts and bolts are covered with base plate cover.
15. High tensile steel with galvanized nut bolts are used for
assembly.
16. Equipment made to GS mark, EN16630, DIN 79000 and
ISO 14001 international standard for outdoor fitness
equipment.
17. Self-explanatory stainless steel label fixed on
equipment for ease of use.
The rates are inclusive of all taxes like GST, transportation | 1 | Each Set | - | - |
| 7 | Providing and fixing of Gate valve for hydrant connection | 30 | NO. | - | - |
| 8 | Dips/ Chin Up/ Push Ups ( 3 in One Machine ) :- 1.
Dimensions (LxWxH) 1400 x 1200 x 2100mm. 2.
Fabricated with main post of NB 50mm (G.I) `C` Class pipe
of approved make. 3. Main frame of NB 50mm (G.I) `C`
Class Pipe. 4. Leg support of NB 32mm (G.I) `C` Class
Pipe and other support of NB 25mm (G.I) `C` Class Pipe.
(NB stands for nominal bore i.e. internal diameter of pipe
in millimeters). 5. All pipes are powder coated using akzo
Nobel or equivalent paints of 80-120 micron thick . 6. All
joint of pipe are robotic welded with joints scalloped as
necessary and dressed of removing sharp edges and
burrs. 7. Zinc primer paints is applied at all the welding
points prior to finishing. 8. The equipment is fixed on
ground with concrete of minimum strength M-25 and J
shaped welded bolts of 18mm thickness. 9. Once the
concrete is set, the equipment is fixed on to it . 10. High
tensile steel with galvanized nut bolts are used for
assembly. 11. Equipment made to GS mark, EN16630,
DIN 79000 and ISO 14001 international standard for outdoor
fitness equipment. 12. Self-explanatory stainless stell lable
fixed on equipment for ease of use. The rates are inclusive
of all taxes like GST, Transportation, Installation at site
complete in all respect to full satisfaction of engineer in
charge complete in all respect. | 1 | Each Set | - | - |
| 9 | texmo motor | 1 | Each | - | - |
| 10 | TECHNICAL SPECIFICATIONS and DRAWINGS OF FENCE
Specifications for ROW Greenbelts: Height 1500 mm
S. No. Product/Description
Item 1: Fence as per drawing /assembly:
All system components as below will be fitted to provide the fence as given in the assembly drawing.
The installation will be done as per the civil construction details given in the drawing for grouting the
fence post.
1 Weld Mesh Panels with Fitting Accessories:
(a). Weld Mesh Panels:
i. Weld Mesh Panels manufactured with electrical resistance welded galvanized wires and
subsequently powder coated as per specifications mentioned under.
ii. Weld mesh panel for fence will meet the standards of IS 1566/ IS 4849 with the following
key specifications apart from the other points in the governing specification:
iii. Panel size: 2500 mm X 1500 mm (W x H). Tolerance of plus / - 2 %
iv. Mesh Size: 50 mm X 150 mm (W X H). Tolerance of plus / - 2 mm.
v. Weld Shear strength: Minimum 50 % of the breaking strength of the smallest wire (In
this case the vertical wire)
vi. Mesh Wire: Galvanized MS wire
Horizontal wire, Dia. 5.0 mm ( plus /- 0.05mm): Vertical wire, Dia. 5.0 mm( plus /-0.05mm)
Tensile Strength of wire: Min 500 N/sq.mm: Specification for wire: IS 280
vii. Galvanizing of wire: 100 – 120 GSM as per IS 4826 (Measurement as per IS 6745)
Uniformity of Coating: As per IS 2633: Adhesion test for coating: As per IS 2629 (1985)
viii. Powder Coating: The galvanized panels are subsequently single powder coated after
welding with a thickness of 60 to 80 microns.
ix. Powder Coating Make : Akzonoble / Jotun.
x. Color: RAL 6005 (Military Green): Coating Standard: EN 10245-1/ IS 13871
xi. Other coating requirement: Powder coating should withstand 720 Hours of salt spray test
as per ISO 12944, 1000 hrs of QUV-B Weatherometer Test, Adhesion test,
Electrochemical Impedance Spectroscopy Test (Type Test Certificate for the coating
standards from renowned Laboratories clearly indicating that the coating passes C3 or
higher corrosion protections standard is to be submitted by the bidder along with technical
bid).
xii. Refer drawing of Panel, attached herewith. 25 mm pointed wires should be left on both
sides (top and bottom only), V-band range: 100 mm to 110 mm
xiii. Qty: 400 Panels / KM
(c) Mushroom Head Bolts with security nuts:
i. Each Omega clamp shall be supplied with two sets mushroom headed bolts with security
nuts and washers.
ii. Material: SS 304
iii. Size: M8 X 25 mm
(i) Qty: 3208 nos. / KM
Fence Post and accessories
(a) Fence Post
i. Type: Square Section.
ii. Specification: IS 1161-2014 (Medium Grade)
iii. Outer Dimension: 60 mm X 60mm plus /- 1 %
iv. Thickness: 2.60 mm plus /- 10% (Medium Grade)
v. Length: 2000 mm plus /- 2%
vi. Galvanization: 380 GSM
vii. Powder Coating: The Fence Post are subsequently single powder coated.
viii. Colour: RAL 6005 Coating Standard: EN 10245-1/ IS 13871
ix. Other coating requirement: Powder coating
Meter | 223.6 | Per Mtr. | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.81 MB
BOQ_603299.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .