Construction of Fire and Rescue Service Station with development works at Veppadai in Namakkal District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.6: Supply and Filling of 40mm HBSJ

2.7: Supply and Filling of 20mm HBSJ

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

24 : Manufacturing & supply of steel windows (Weight basis)

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.3 : Supply and planting avenue trees

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

53.3 : C.I. Steps ( 5 kg)

55.2 : Flat Back Urinal

Electrical arrangements 69 : 16 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

ANNEXURE-I 2.1.1 : Supplying and filling Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1 : P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)

3.9.1 : PCC 1:3:6 for foundation & basement using 20mm metal (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM²

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Stilt / Ground Floor

c) In First Floor.

d) In Second Floor.

e) In Third Floor.

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

10.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and basement

b. In Stilt / Ground Floor

c. In First Floor

d. In Second Floor

e. In Third Floor

11.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

12.1.1 : Brick partition work in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick (using crushed stone sand) a. In Ground floor

b. In First Floor

c. In Second Floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation & Basement

15.2.1: Cuddappa slab 40 mm tk.for C/B slab. (using crushed stone sand) a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

18.1 : Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.For Vertical wall

f. Curved surface

g.Double centring garage

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.5.5.1: Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 1000mm x 2400mm (Single Leaf)

b) Door size 900mm x 2400mm (Single Leaf)

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) with plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) with plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) with plasticizer

35.1.1 : Plastering 1:3, 12mm with WPC (using crushed stone sand)

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) with plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Plastic Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M20)

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1 : Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150mm (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.2: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.1 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5 : PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.2.1 : Gully Trap using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.2.2 : PVC Equal Tee as per BIS 7834/1975 b. 160 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

71.2: Supplying and fixing of 32Amps triple pole main switch with fuse and neutral link

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.8 : Run of 4 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

80.1: S & F of 450 x 375 x 20mm thick TW plank

87.1: Supplying and delivery of Three phase ELCB/RCCB

90.1: Providing additional strutting to centering of plain surface

98.5.4: TW Panelled door shutter with brass fittings (Double leaf) a. 1800mm x 2400mm.

b. 1200mm x 2400mm.

112.1 : S&F of 225 mm dia sweep AC exhaust fan

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1: Supplying and fixing of Stain Free Nano Polish colour Vitrified Tiles of size 60cmx60cmx8mm for flooring (using crushed stone sand)

379.4.2.2 : Supply and fixing of superfine polished with machine cut edges (Ruby red/Raw silk and similar varieties) of size 4' x 2' of Granite slab 18 to 20mm thick laid over in CM 1:3 (using crushed stone sand)

384: S&F of PVC flushing cistern

448.2: Supply and fixing 32mm dia PVC Tee with end cap

ANNEXURE-II: A1: Providing T.W. double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded bwr grade plywood (For Rest room )

A2: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free.

A3: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free.

A4: A114: Supply and fixing of UPVC Sliding Window

A5: Supplying and fixing of CP Angle Cock Tap including cost of all materials and labour charges etc., all complete and as directed by the departmental officers.

A6: Supplying and fixing of CP Shower Arm 9" long with overhead shower rose including cost of all materials and labour charges etc., all complete and as directed by the departmental officers.

A7: Supplying and fixing of 15mm dia CP Two way bib cock with health faucet including cost of all materials and labour charges etc., all complete and as directed by the departmental officers.

A8: Supplying and fixing of CP Shower stop cock including cost of all materials and labour charges etc., all complete and as directed by the departmental officers.

A9: Supplying and fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb for bulk head fittings

A10: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A11: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A12: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A13: Supply and fixing of 80W LED out door focus light fittings of best approved quality and variety with necessary fittings including all materials and labour charges etc., all complete.

A14: Supplying and fixing in position of colour galvalume sheet of 0.47mm thick as ridge piece inclusive of overlap length labour charges and nuts, bolts etc., all complete and as directed by the departmental officers. (the quality and the brand of material should be got approved by the executive engineer before use)

A15: Drilling of 6" dia (150mm) vertical bore in hard rock areas anywhere in Tamil Nadu including transportation to the worksite in hard rock areas and developing the borewells etc., all complete and as directed by the departmental officers. a) Up to 150m below Ground Level

b) From 151m up to 180m

c) From 181m up to 210m

d) From 211m up to 240m

e) From 241m up to 270m

f) From 271m up to 300m

A16: Supplying, delivery and fixing of 160mm dia PVC casing pipe 6kg/cm2 of approved quality with ISI mark conforming to IS specifications as per IS 12818/1992 for borewell with average wall thickness of 6.10mm and with inner/outer threaded ends at standard length etc.,

A17: Supplying and fixing of 160mm dia PVC end cap for borewell of best approved quality with ISI mark conforming to IS specifications including cost of materials conveyance to site and labour charges for fixing in position etc., all complete.

A18: Supply and delivery of clear water vertical wet type 5 HP submersible pumpset without panel board suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes.

A19: Supply and delivery of 3 HP Open well Submersible pump set without panel board conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes.

A20: THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) For 3 HP

A21: THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) For 5 HP

A22: Labour charges for the erection of submersible pumpset in borewell / openwell including fixing and jointing submersible cable with proper clamps upto the starter. Upto 5 HP

A23: Supplying and laying of 3 core 4 sqmm 1100V grade copper UG flat cable of best and approved quality having ISI mark etc., all complete. (AGL)

A24: Supplying and laying of 3 core 4 sqmm 1100V grade copper UG flat cable of best and approved quality having ISI mark etc., all complete. (BGL)

A25: Supply & laying of 32mm dia UPVC - Column pipe approved quality with ISI mark

A26: Supplying and laying of GI pipe "B" class with ISI mark for Below ground level including cost of Eatrh work excavation and refilling ,labour charges, etc complete, all complete and as directed by the departmental officers a) 50 mm dia GI 'B' class pipe

A27: Supplying and laying of GI pipe "B" class with ISI mark for above ground level including cost of clamping and labour charges, fixing GI pipes etc complete, all complete and as directed by the departmental officers. a) 50 mm dia GI 'B' class pipe

b) 65 mm dia GI 'B' class pipe

A28: Supplying of 25 mm dia PVC rigid pipe 10 Kg/cm² including all specials etc., completed for casing pipes for 4.0 sq mm submersible flat cable and as directed by the departmental officers.

A29: Supplying, laying, fixing and jointing the following PVC pipe including cost of pipe, materials and labour charges for earth work excavation, laying, jointing, refilling the earth and cost of conveyance charges with necessary specials etc., all complete and as directed by the departmental officers. (Below Ground level). a) 50mm dia OD PVC pipe 10Kg/m²

b) 40mm dia OD PVC pipe 10Kg/m²

A30: Supplying and delivery of following dia GI, GM, CI, PVC and MS specials of best and approved quality having ISI mark etc., all complete. a) 32mm dia UPVC ball valve

b) 25mm dia UPVC ball valve

c) 20mm dia UPVC ball valve

d) M.S Clamp set 40mm

e) 50mm dia GI Coupling

f) 50mm dia GI Bend

g) 50mm dia GI Union

h) 40mm dia SS Top & Bottom adopter set

i) 40mm dia PVC Bend

j) 50mm dia PVC Bend

k) 50mm dia PVC Coupler

l) 50 x 40mm dia PVC reducer

m) 40 x 32mm dia PVC reducer

n) 50mm dia GM Non Return valve

o) 40mm dia GI Bend

p) 65mm dia GI Bend

q) 65mm dia GI Coupling

A31: Supplying and delivery of following God - rej novtal lock including all cost of lock etc., complete. a) 6 Lever with 3 keys

A32: Supplying and fixing of the following dia of the MS clamp set of superior quality etc., all complete. a) 65mm dia

b) 50mm dia

A33: Supply and delivery of 3.5 core 35 sqmm PVC armoured UG Cable with ISI mark of best approved quality etc., all complete and as directed by the departmental officer.

A34: Supply and delivery of 3.5 core 25 sqmm PVC armoured UG Cable with ISI mark of best approved quality etc., all complete and as directed by the departmental officer.

A35: Supply and fixing of brass cable gland for 3.5 x 35 sq.mm. PVC armoured LTUG cable with earth connection

A36: Supply and fixing of brass cable gland for 3.5 x 25 sq.mm. PVC armoured LTUG cable with earth connection

A37: Supplying and fixing of UPVC 200mm dia Exhaust fan fixing in the store and record of approved ISI quality etc, all complete and as directed by the departmental officers., (The quality and brand should be got approved from Executive Engineer before use).

A38: Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Lower End

A39: Supply and fixing of 8 way vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100A 4P MCB Isolator as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Lower End

A40: Supplying and fixing of following size of Aluminium Dye casting letters with MRF Powder Coating including labour charges for fixing in position cost and conveyance of all materials, T.W plugs, screws metal paste and labour charges etc.,. a) 9" size Aluminium Dye casting letters

b) 12" size Aluminium Dye casting letters

A41: Supplying and fixing of 15" size height TNPHC Emblem (Tamil Stainless Steel letters)

A42: Supplying, fixing & delivery of steel cupboard rack arrangements of following sizes H round frame made up M.S angle 50x50x3mm and cupboard racks made up 0.90x0.60, 16 gauge M.S sheet including cost of labours for fixing in position. Painting the racks two coats over one coat of primer and transportation charges etc., i) 6 Nos. of racks size 1.00x2.10 m

A43: Column gurard and Stickering with Supply retro reflectorised signs made out of High intensity prismatic grade sheeting confirming to IRC 67-2010 and ASTMD495609, Type IV specification and fixed over 3mm thick ACP sheet.

A44: Supplying and fixing of following size 24" x 4" and 5" dia plastic foam plate of 3mm thick with 3" height vinyel cutting numbers with approved colours etc., complete and as directed by the departmental officers.

A45: Supplying and fixing of Gong bell 12'' size suitable for 250V including cost of fittings and labour charges for fixing etc., all complete and as directed by the Departmental Officers.

A46: Supplying and fixing of PVC Trims at tiles corner with necessary connections etc., (The brand shall be got approved from the Executive Engineer before use)

A47: Providing water proofing treatment for the toilet sunken portion with epoxy coat including cost of materials and labour charges etc,. all complete and as directed by the Departmental Officers.

A48: Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface including cost of putty and labour charges etc,. all complete and as directed by the Departmental Officers.

A49: Labour charges for conveying and laying of UG cables in the cable trench including earth work and providing sand cushion with brick layers below ground level etc., complete for UG cable of size 4 to 95 Sq.mm and 2, 3, 3.5, 4 core with ISI Mark etc., all complete and as directed by the departmental officers.

A50: Labour Charges for conveying and fixing of UG Cable of Size of 4 to 95 Sq.mm and 2, 3, 3.5 , 4 core with necessary MS clamps and brass screws including cost of materials and redoing the dismantled portion in to the original position etc..., all complete and fixing of UG cables on walls and ceiling etc., all complete and as directed by the departmental officers.

A51: Wallputty (One coat)

A52: Clearing the scrub jungle available in the site and removing the same and disposing off as directed by the departmental officers. The cost include uprooting roots if any, all tools and plants required etc. all complete as per relevant standard specifications and as directed by the departmental officers.