Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.1 LAccepted-AOC VILL MASTOL PO KALOTI TEHSIL CHIRGOAN DISTT SHIMLA 171207 HP | SHIMLA | HIMACHAL PRADESH | 171207 | L1 | Accepted-AOC L1 | |
| 2 | L2₹11.1 L+₹2,026.80 (0.18%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | Not Admitted-Fee/PreQual/Technical VILLAGE SHEKHAI P O DHADI GUNSA TEHSIL ROHRU DISTT SHIMLA HIMACHAL PRADESH | ROHRU | SHIMLA | HIMACHAL PRADESH | - | Not Admitted-Fee/PreQual/Technical Others-DOCUMENT NOT SUBMITTED PHYSICALLY. | |
| 4 | Not Admitted-Fee/PreQual/Technical C O MADAN MOHAN BUILDING TOTU SHIMLA 11 TEH DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | - | Not Admitted-Fee/PreQual/Technical Others-DOCUMENT NOT SUBMITTED PHYSICALLY. |
| Sl No | Description | Qty | Unit | Jitender Sharma L2 | PREM KRISHAN L1 |
|---|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas in all width and depth on plan) including getting out and disposal of excavated earth all leads, lifts and carriage of material as directed by the Engineer-in-charge .a). Ordinary rock | 5.01 | Cubic Metre | 400 ₹2,004 | 350 ₹1,753.5 Lowest |
| 2.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 1:2:4 (One cement : two coarse sand) : four graded stone aggregate 20 mm(Twenty milimetre nominal size). | 5.01 | Cubic Metre | 4,500 ₹22,545 Lowest | 7,000 ₹35,070 |
| 3.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering work up to plinth level with 1:5:10 (one cement : five sand : ten graded stone aggregate 40 mm (forty milimetre) nominal size etc. complete in all respect as per satisfaction of Engineer-in-charge. | 30 | Cubic Metre | 4,800 ₹1,44,000 Lowest | 5,000 ₹1,50,000 |
| 4.00 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement work up to plinth level with 1.1.5:3 (one cement : one and half sand : three stone aggregate 20 mm (Twenty milimetre) nominal size) in foundation and plinth etc. Complete in all respect as per satisfaction of Engineer-in-charge. | 4.14 | Cubic Metre | 6,000 ₹24,840 Lowest | 7,500 ₹31,050 |
| 5.00 | Centering and shuttering including strutting, propping etc. and removal of form for etc. complete in all respect as per satisfaction of Engineer-in-charge a). Foundations, footings, bases of columns, etc. for mass concrete. | 14.01 | Square Metre | 400 ₹5,604 | 270 ₹3,782.7 Lowest |
| 6.00 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Thermo-Mechanically Treated bars of grade Fe-500D or more. | 372.6 | Kilogram | 95 ₹35,397 Lowest | 100 ₹37,260 |
| 7.00 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level with Cement mortar 1:4 (one cement : four sand) etc. complete in all respect as per satisfaction of Engineer-in-charge. | 72 | Square Metre | 900 ₹64,800 Lowest | 1,050 ₹75,600 |
| 8.00 | 52 mm (fifty two milimetre) thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. as required Complete in all respect as per satisfaction of Engineer-in-Charge. | 200 | Square Metre | 500 ₹1,00,000 Lowest | 775 ₹1,55,000 |
| 9.00 | MS pipe (Square,rectangular) work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. complete in all respect as per satisfaction of Engineer-in-Charge. | 3,193 | Kilogram | 140 ₹4,47,020 | 115 ₹3,67,195 Lowest |
| 10.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete in all respect as per satisfaction of Engineer-in-Charge.(TATA/ JINDAL MAKE) | 250.56 | Square Metre | 1,050 ₹2,63,088 | 1,000 ₹2,50,560 Lowest |
Tender Value
₹8.3 L
EMD Value
₹17,000
Closing Date
16 Jul 2025, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Engineer cum Nodal Offficer
O/o Estate organization UHF Nauni Soaln
Construction of Production Unit for the Deptt. of SSWM at Dr YSP university of Horticulture and Forestry Nauni Solan
2025_YSPU_109527_1
UHF/Const-1/Tender/2025/-1009
Open Tender
Civil Works
Item Rate
180 days
Nauni Solan
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
DDO ,Estate Organization
₹17,000
23 Sept 2025
5 Jul 2025
16 Jul 2025
5 Jul 2025
16 Jul 2025
5 Jul 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas in all width and depth on plan) including getting out and disposal of excavated earth all leads, lifts and carriage of material as directed by the Engineer-in-charge .a). Ordinary rock
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 1:2:4 (One cement : two coarse sand) : four graded stone aggregate 20 mm(Twenty milimetre nominal size).
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering work up to plinth level with 1:5:10 (one cement : five sand : ten graded stone aggregate 40 mm (forty milimetre) nominal size etc. complete in all respect as per satisfaction of Engineer-in-charge.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement work up to plinth level with 1.1.5:3 (one cement : one and half sand : three stone aggregate 20 mm (Twenty milimetre) nominal size) in foundation and plinth etc. Complete in all respect as per satisfaction of Engineer-in-charge.
Centering and shuttering including strutting, propping etc. and removal of form for etc. complete in all respect as per satisfaction of Engineer-in-charge a). Foundations, footings, bases of columns, etc. for mass concrete.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level with Cement mortar 1:4 (one cement : four sand) etc. complete in all respect as per satisfaction of Engineer-in-charge.
52 mm (fifty two milimetre) thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. as required Complete in all respect as per satisfaction of Engineer-in-Charge.
MS pipe (Square,rectangular) work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. complete in all respect as per satisfaction of Engineer-in-Charge.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete in all respect as per satisfaction of Engineer-in-Charge.(TATA/ JINDAL MAKE)
Jitender Sharma (BID ID -535098)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .