Construction of 15 Nos. of Health Centre at different places in DNH (5th call)

Amount

Excavation for foundation up to 1.5 m depth including sorting out and stacking of useful materials and disposing of the excavated stuff up to all lead and lift. (A) All kind of soil, Hard Murrum, Soft rock, etc

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) All kind of soil, Hard Murrum, Soft rock, etc

Supplying and filling in plinth with Sand and/or Unscreen Gravel under floors, including watering, ramming, consolidating and dressing complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.etc complete as directed by engineer-in-charge.

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves and Cantilever upto floor two level, etc complete as directed by engineer-incharge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever upto floor two level etc complete as directed by Engineer-incharge. etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever above floor two level etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the Cost of reinforcement for reinforced concrete work in (D) Columns, Pillars, Circular, rectangular posts and struts upto floor two level. etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever upto floor two level etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in (E) Staircases upto floor two level, etc complete as directed by engineer-incharge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves and Cantilever above floor two level, etc complete as directed by engineer-incharge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the Cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts above floor two level. etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in Walls upto and above floor two level, etc complete as directed by engineer-incharge.

Providing TMT Bar FE 500/500D reinforcement of for R.C.C. work including bending, binding and placing in position complete upto floor two level

Providing, laying and constructing Brick work using common brunt clay building conventional bricks having crushing strength not less than 35 kg./sq.cm. in Foundation and Plinth in cement mortar 1:5 (1 cement : 5 sand) in true line and level including curing, scaffolding, racking out the joints etc. complete as directed by engineer in charge. Plinth Masonry

Providing, laying and constructing Aerated light weight concrete block of (Magicrete / Eracrete / Eco green) make approved quality having crushing strength not less than 35 kg/sqcm for super structure in cement mortar 1:5 ( 1 cement : 5 sand ) or chemical joint complete as directed by engineer in charge. All Floor level

Providing material and labour for fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, with Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S, including cost of adhesive of approved quality 1.0mm Thick on both face, with Providing and fixing S.S. tower bolts (barrel type) with necessary screws etc 200mm long x10mm dia, with Providing and fixing S.S. Door Aldrop with necessary screws etc. 300mm long x16mm dia, Providing and fixing S.S. Door Aldrop with necessary screws etc 250mm long x16mm dia, with Providing and fixing S.S. Pipe Handle for door 30cm size on both side of Door shutter, with Providing and fixing S.S hanging type floor door stopper with necessary screws, etc. complete as directed by Engineer in charge. All S.S Shall be ASIS 304 Grade.

Supply of 35mm thick Fiber Glass shutter with 1.5 to 2.0 mm thick fire retardent grade FRP skin in wood grain rasied panel design having extra reinforcement on sides & edges & in polish design finish. The core of the shutter is to be filled up with injected retardent grade polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole shutter is to be water proof ,weather proof, termite proof & resistance to mild acid/alkali with Providing and fixing S.S. tower bolts (barrel type) with necessary screws etc 200mm long x10mm dia, with Providing and fixing S.S. Door Aldrop with necessary screws etc. 300mm long x16mm dia, Providing and fixing S.S. Door Aldrop with necessary screws etc 250mm long x16mm dia, with Providing and fixing S.S. Heavy Door handles with screws etc 150mm long on both side of Door shutter, with Providing and fixing S.S hanging type floor door stopper with necessary screws, etc. complete as directed by Engineer in charge. All S.S Shall be ASIS 304 Grade.

Providing and fixing extruded aluminum window having extruded aluminum Colour anodized section frame main outer size 127mm x 38.10mm x 1.35mm (of Jindal Section no:2443,@ Wt.1.384 Kg/mt),horizontal Four track member size 122.20mm x 31.75mm x 1.10mm (of Jindal Section no:8787,@ Wt. 1.205 Kg/mt),vertical member of size 122.20mm x 31.75mm x 1.50mm (of Jindal Section no:8935,@ Wt. 1.398 Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt),vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/Section 8948,@ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float glass/s.s mosquito net with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window.

Providing and fixing standard extruded of alluminium section of size 63 mm x 38.10 mm x 1.2 mm ( of Jindal Section No. 2434 @ wt 0.643 kg/rmt ) with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for ventilation

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade area of slab upto 0.50 sqm, etc complete as directed by engineer-incharge

Providing 15 mm. thick cement plaster in single coat on fair side of Brick/concrete walls for interior plastering upto floor two level and finished even and smooth in Cement mortar 1:4 [1 cement: 4 sand) including floating coat of neat cement slurry and necessary curing, scaffolding, in true line and level etc. complete as directed by Engineer in Charge

20 mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete

Providing cement vata ( 10 cm x 10 cm size ) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete as directed by Engineer in Charge

Providing throating or plaster drip and moulding to RCC projections as directed by Engineer in Charge

Forming groove of uniform size from 12 x 12 mm and upto 25 x15 mm in plastered surface as per approved pattern using wooden batten, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the EIC.

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. Including Wall painting (two coats) with plastic emulsion paint (make of Asian,nerolac,Berger ) of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Providing & laying Glossy, matte or Rustic ASTERIX BEIGE or equivalent Vitrified heavy duty 9.5 mm thick tiles flooring, laid on bed of 20mm (Average) base of Cement Mortar 1:6 (1-Cement : 6 Coarse Sand) on new surface and jointed with colour cement slurry including finished with flush pointing & cleaning the surface etc. completed of any shade approved by Higher Authority of approved brands like Somani ,Rak, City, Sun Heart,Marbito etc. of approved size (60X60cm) as directed by Engineer in Charge

Prov. & laying Digital 60 x 30 cm Full Body Glossy, matte or Rustic Natural IVORY PISSARO LT Ceramic Ultima Digital 8 mm to 9 mm thick tiles ,skirting,dado laid on bed of 20mm (Average) base of Cement Mortar 1:6 (1-Cement : 6 Coarse Sand) on new surface and jointed with colour cement slurry including finished with flush pointing & cleaning the surface etc. completed of any shade approved by Higher Authority of approved brands like Somani ,Rak, City, Sun Heart,Marbito etc as directed by Engineer in Charge.

Providing and laying Mirror polished green Kota Stone Slab flooring,dedo or skirting over 20mm ( average )thick base of cement mortar 1 : 6 ( 1 cement : 6 Coarse sand ) or L.M 1:1.5 laid over and jointed with grey cement slurry including rubbing and polishing etc. complete of approved colour and shade as per the drawing provided by the architect. 25mm Thick

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing material and labour for construction of Kitchen Platform made from Black Granite (16mm to 18mm thick) in top of kitchen platform rested on black kadapa stone (av.30mm thick) supported on sandwiched vertical supports of Kadapa Stone bottom of granite stone for base of platform, at required distance or as directed by Engineer-in-charge. One side vertical granite stone in geometrical shape, front granite stone patti for fascia work as well as horizontal boarders including molding and mirror polishing by hand grinder to all exposed black granite edges and providing opening of required size and shape of kitchen sink in granite and kadapa stone in line and level. The vertical supports of kadapa stone sandwiched/ gap fill up with cement mortar 1:1 and cement slurry and the granite stone vertical side and patti etc with adhesive material like Araldite etc complete as directed by Engineer-in-charge.

Providing Material, Labour and equipments for Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thickjointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : including Khurra & Gola work With average thickness of 120 mm and minimum thickness at khurra as 65 mm, etc complete as directed by engineer-incharge.

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill.

Providing Material, Labour and equipments for Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. etc complete as directed by engineer-incharge. With Brick work using Conventional common burnt clay building brick having crushing strength not less than 35 kg/sq.cm etc complete as directed by engineer-incharge.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing laying and jointing in true line and level 160 diameter U.P.V.C. SWR Type B pipe PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by Engineer in-Charge & conforming to IS 13592-1992 with one end plain and other end socketed with rubbering, & fitting conforming to ISI 14735-1999 of approved make for Horizontal drainage line below ground level, including necessary fittings such as bends, tees, rubber packing ring etc. testing of pipeline, jointing with adhesive solvent cement including cost of excavation,lowering and laying pipes, refilling the trenches, jointing materials and all other necessary fixtures fitted, air and water tight testing of the line etc. complete as directed.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 PRINCE/SUPREME/ASTRAL/FINOLEX or equivalentas approved by Engineer in-Charge & working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor. 110 mm Dia

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polyurethane pipes of the following outside Dia.PRINCE/ SUPREME/ASTRAL/ FINOLEX or equivalent Low density, complete with special flange compression type fittings, wall clips etc. including making good the wall ceiling and floor. 75 mm Dia

Providing Brick bats chhara filling in sunken floors including watering, consolidating, ramming etc complete.

Construction of brick masonry chamber inside dimension as below & required depth for drainage pipeline, with required inlet and outlet for under ground C.I. inspection chamber and with 230 mm thick brick wall having crushing strength not less than 35 Kg. /sq.cm. in C.M.1:5 (1cement : 5 sand) C.I. Cover with frame(Light duty 455 mm X 610 mm internal dimension, total weight of cover with frame not less than 38 Kg. ( weight of cover 23 Kg and weight of frame 15 Kg),R.C.C. top slab with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size B.T. Kapchi) foundation concrete 1:2:4) (1 cement : 2 sand :4 graded stone aggregate 40 mm nominal size) inside plaster 15mm thick in cement mortar 1:3 (1cement : 3 sand ) finished smooth with floating coat of neat cement slurry on walls and bed concrete curing etc. in true line and level/slope etc. complete as directed by Engineer In charge.Inside dimension 455 mm x 610 mm and 450 deep or more for pipe line with one or two inlets as directed by Engineer in Charge.

Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x 260mm x 350mm., including painting of fittings and cutting and making good the walls and floors wherever required, complete as directed by engineer-incharge. (Make Parryware, Hindware, Cera, Jaquar)*.

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (A) vitreous China Pattern :(i) in white colour and Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. White plastic seal and cover. Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet Vitreous China (I) In white colour (Make Parryware, Hindware, Cera, Jaquar)*.

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (A) Vitreous China.(I) Long pattern = White colour and fixing 100mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China. and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse sand), pair of white vitreous China 250mm x 130mm x 30mm footrest to long pattern squatting pan water closet. Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(ii) 25mm dia, etc complete as directed by engineer-incharge.(Make Parryware, Hindware, Cera, Jaquar)*.

Providing and fixing 15mm dia. brass screw down stop tap make such as Cera,Hindware,Jaquar including fixing in pipeline etc. complete as directed by Engineer In charge. '

Providing and fixing C.P. brass Heavy duty bib cock with cap of approved quality conforming to IS standards. 15 mm nominal bore, with all fittings, etc complete as directed by engineer-incharge. (Make Jaquar, Kohler, Roca, Cera, Parryware, Hindware, Plumber)*

Providing and fixing 50mm dia. gun metal check or non return full way wheel valve in pipeline of approved quality etc. complete as directed by Engineer In charge.

Providing & fixing 50mm dia & 30cm length G.I. rainwater spout including making hole and fixing in proper slope and required pattern fixed in cement mortar 1:1 (1 cement : 1 sand) etc. complete as directed by Engineer In charge.'

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 75 mm diameter with jali of the following nominal diameter of self cleansing design with C.I. Scread down or hinged grating including the cost of cutting and making good the walls etc. as per the approval of Engineer in charge.

Providing and fixing wash basin Cera,Hindware,Somany (550x400 mm ) counterfit Cera/ hindware , including 40 mm dia C.P. brass waste, 40 mm dia waste pipe, 15mm dia flexible pipe and rubber plugs etc. complete as directed.

Providing and fixing C.P. brass Heavy Duty Swan Neck Type Pillar cock {Make Jaquar, Kohler, Roca, and/or as approved by Engineer-incharge Pillar Cock with Raised ‘J’ Shaped Swinging Spout (Table Mounted Model)}of approved quality conforming to IS:Standards : 15 mm nominal bore (Make Jaquar, Kohler, Roca, Cera, Parryware, Hindware, Plumber)*

Providing and fixing 2 in 1 Bib tap 15 MM, of Cera/Hindware/Jaquar Or Equivalent capstan head, screw down high pressure with screws, shanks and back nuts etc. as per the approval of Engineer in charge.

Providing & fixing 600 mm X 450 mm beveled edge mirror Cera,Hindware Or Equivalent of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with C.P.brass screws and washers, including fixing C.P. brass bracket support and guard rail fixed to wooden plugs with C.P. brass screws etc. complete as directed by engineer In charge.

Providing and fixing 600 mm X 200 mm size C.P. brass towel rail Cera,Hindware Or Equivalent complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws etc. complete as directed by Engineer In charge.

Providing and fixing PTMT soap Dish Holder Cera,Hindware Or Equivalent having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms etc. as per the approval of Engineer in charge.

Providing and fixing Stainless steel A ISI 304 ( 18/8) kitchen sink ( NIRALI BRAND ) as per IS 13983 with CI brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510 x 1040 mm bowl depth 225mm as directed by Engineer in Charge

providing and fixing double coated syntex or equivalent PVC (ISI) mark water tank of required capacity each with al necessary fitting & connection etc Comp. on terrace as directed by Engineer in Charge

Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings :Size 600x450x200 mm as directed by Engineer in Charge

Providing and fixing C.P. Brass Shower rose make of Cera, Hindware, Jaquar with 15mm or 20mm inlet. (A) 100mm dia as directed by Engineer in Charge.

Providing and fixing 2 in 1 Mixture Cock make of Cera, Hindware,Jaquar with 15mm or 20mm inlet. (A) 100mm dia as directed by Engineer in Charge.

Providing carbon dioxide type fire exit 4.5 KG capacity with ISI mark etc. as directed by Engineer in Charge.

Providing dry chemical powder type fire extinguishers of 5 kg/Capacity with ISI mark (IS 2171) etc as directed.

Forming groove/patta/plaster band of uniform size in the top layer of washed Sand plaster of (15 -30)Cm wide and 20 mm thick on finish Exterior surface as per approved pattern and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

Providing and fixing shower seat of standard make as per following specification. • Stainless steel 304 grabe • Pipe OD-1 inch • Seat dept- 400 mm • Seat width – 500 mm • Seat height – 470 mm • Plate thickness – 2 mm • Anti-skid floor flanges of 6 mm OD and 5 mm thickness with rubber gasket • Argon welding (GTAW), perfect right angle • Matt finish • Designed to promote independent transfer by user from wheelchair also Can sustain weight upto 200 kgs. as directed by Engineer in charge.

Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. Painting two coats on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

Providing and applying Bondvoll's NATURA synthetic texture plaster of average thickness 18 mm consisting of 12 mm thick smooth mala plaster in cement mortar 1:3 (1 cement : 3 fine sand), natura primer coat, natura stone texture and natura clear coat with necessary grooves, curing etc complete for all heights as per the pattern given by the architect and as instructed by the engineer-in-charge.

providing and Health Fauset Heavy duty with hook with fittings etc. of standard make as directed by engineer in-charge.

Providing and laying heavy duty (90 micron) HDPE (Plastic) sheet below plinth slab (P.C.C) as specified with all labour charges and materials etc. complete as directed by engineer in-charge.

Providing and applying two component acrylic polymer modified cementitious elastic waterproof coating (make SG Globlastic or equivqlent) for concrete and masonery surface used for multiple application (2 or more coat) for water proof including cleaning of surface, paint, dirts etc, mixed with two components throughly to a uniform paste and apply it on the wet concrete surface with brush and slurry should be apply within 20 minutes as specified with all labour charges and materials etc. complete as directed by engineer in-charge.

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S code

Providing and Applying Multi-Color craft / art painting using Acrylic and/or Enamel Paint. The width of the craft / art pattern painting shall be 250mm to 300mm (10" to 12") wide of any line thickness. The specification shall be conforming to the Ayushman Bharat Scheme of MoH&FW. It also includes, scrapping, brushing, and levelling the wall surface if required using cement putty / plaster of paris, etc.

Providing and Applying Multi-Color Illustrative painting using Acrylic and/or Enamel Paint. The size of the Illustrative painting shall be 600mm (24") dia circular and/or 600mm x 600mm ( 24" x 24") square of any line thickness. The specification shall be conforming to the Ayushman Bharat Scheme of MoH&FW. It also includes, scrapping, brushing, and levelling the wall surface if required using cement putty / plaster of paris, etc.

Providing and Applying Multi-Color Text painting using Acrylic and/or Enamel Paint. The width of the Text painting or height of the Text shall be 300mm to 450mm (12" to 18") wide of any line thickness. The specification shall be conforming to the Ayushman Bharat Scheme of MoH&FW. It also includes, scrapping, brushing, and levelling the wall surface if required using cement putty / plaster of paris, etc.

Providing and Applying Multi-Color Illustrative / Logo painting using Acrylic and/or Enamel Paint. The size of the Illustrative painting shall be 900mm (36") dia circular and/or 890mm x 660mm (35" x 26") rectangle of any line thickness. The specification shall be conforming to the Ayushman Bharat Scheme of MoH&FW . It also includes, scrapping, brushing, and levelling the wall surface if required using cement putty / plaster of paris, etc.

Point wiring for Light / Fan /Exhaust Fan/Bell Point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector with medium class Rigid PVC pipe and accessories cat III Make of switch and board: Havells/Anchor/Legrand/L&T (As directed by Engineer in charge)

Providing Modular Type Accessories with 16 Amp SP one way switch & 5 pin 6/16 Amp Universal socket mounted with pvc /metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection.Make of switch and board: Havells/Anchor/Legrand/L&T CAT III (As directed by Engineer in charge).

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %,CCT 4000 K to 6500K, Uniformity ratio >0.7,Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). Tube Light with integral/ non-integral driver.20-22 Watts, Surge - 4KV,IP-20. Cat III. Make:Wipro,Havells,Philips,Bajaj.(As directed by Engineer in charge).

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing. Make: ANCHOR/BAJAJ/USHA/ORIENT/CROMPTON.(As directed by Engineer in charge)

Supplying & fixing stepped type electronic fan regulator on the existing module plate switch box including connections but excluding modular plate etc. as required. (As directed by Engineer in charge)

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible wire with earthing.(As directed by Engineer in charge)

Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square frame.

Providing and erecting 3 star and above rated approved make split air-conditioning unit consisting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of proper insulated copper tubing up to 5 RMT suitable for 2 ton capacity (Cost includes M.S. Stand, Gas Charging & Internal Copper Wiring & Remote Control) Make:Voltas,Samsung,Lloyd,Daikin.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of with medium class Rigid PVC pipe and accessories of size size 2 wire 4 sq. mm Make:-Polycab/RR cable/Finolex/Havell’s (As directed by Engineer in charge)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity with medium class Rigid PVC pipe and accessories 2 wire 1.5 sq. mm Make:-Polycab/RR cable/Finolex/Havell’s (As directed by Engineer in charge)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity with medium class Rigid PVC pipe and accessories 2 wire 2.5 sq. mm Make:-Polycab/RR cable/Finolex/Havell’s (As directed by Engineer in charge)

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of size 4 core 10 Sq. mm Make:-Polycab/RR cable/Finolex/Havell’s (As directed by Engineer in charge)

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of size 4 core 6 Sq. mm Make:-Polycab/RR cable/Finolex/Havell’s (As directed by Engineer in charge)

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark (CAT III) Make:Legrand/Havells/anchor. (As directed by Engineer in charge)

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (b)40 Amp. Cat III Make:Legrand/Havells/anchor (As directed by Engineer in charge)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (b)63 Amp. Cat III Make:Legrand/Havells/anchor (As directed by Engineer in charge)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) Single phase 12 way SS Double door . (As directed by Engineer in charge)

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. For electrical installation up to 440 V Length of Pipe - 1 Mtr Back filling compound - 1 Nos. of Bag of 15 Kgs..(As directed by Engineer in charge)

Providing and erecting four pole MCB isolator A.C. 22 duty confirms to IS 13947-3 in existing box.100 Amp. Cat -III.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficiency> 85 lumens/watt . LED driver efficiency > 85 %. CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates).Street Light (IP-65), Surge -4KV. above 36 to 48 watts. Cat III.Make:Syska,Havells,Philips,Bajaj.(As directed by Engineer in charge).

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of 4 core 2.5 Sq. mm size of cables.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable of Size 3 Core x 2.5 Sq. mm. Make:-Polycab/RR cable/Finolex/Havell’s (As directed by Engineer in charge)

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger, static Inverter & sealed maintenance free batteries. The charger having operating capacity for input 160-270V AC & inverter having output 23OV,5O Hz Ac with 0.8 load power factor with battery, over under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following capacity & with Following size of batteries. 5 KVA,With 11 Nos. of 12 V 55 Ah SMF batteries

Supplying and erecting horizontal / vertical mounting type storage water heater with copper container housed in M.S./S.S. body insulated with glass wool / puff complete with heating elements,adjustable thermostats 300 c to 850 C, indicating lamp, safety valve, fusible plug, etc.complete erected with coach bolts, nuts. washers & cementation.10 Ltr. with 3 KW. heating element. Cat III

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.(As directed by Engineer in charge).

Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding the Cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts upto floor two level. etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever upto floor two level etc complete as directed by Engineer-incharge. etc complete as directed by Engineer-incharge.

Providing material and labour for Brick work using common burnt clay building brick having crushing strength not less than 35 kg/sq.cm. in superstructure above Plinth level upto Floor Five Level in cement mortar 1:6 (1 Cement : 6 fine sand) (B) Conventional including curing etc. complete.

Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, 50 mm thick

Providing Material, Labour & Equipment for Compound Gate in Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) sections confirming to IS 4923-1997 etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete, with Hot finished seamless type tubes, including all Hinges, Castor Wheel, Aldrop, Fixtures and Fasteners, etc as approved by engineer-incharge. The Design of Compound Gate shall be as per Engineer-incharge specification.

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth, etc complete as per the direction of Engineer-in-charge

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) etc complete as per the direction of Engineer-in-charge

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) etc complete as per the direction of Engineer-in-charge

Providing and laying C.C. pavement of controlled cement concrete M250. The concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush and making groove joint and filling it with filler material as specified by engineer-incharge h etc. complete as per specifications and directions of Engineer-in-charge.

Providing and laying Cement Mortar 1:3(1-Cement: 3- fine sand ) (upto 10 ton) complete as directed by engineer-incharge.

VASANT CONSTRUCTION CO INDIA

Hirani Enterprise

Parth Infrastructure Pvt. Ltd.

Vatsal Construction Co