NIT No GE/ND-100/2024-25

Amount

Taking down copper/aluminium point wiring (fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,Light fitting etc. removing materials to store for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan/ exhaust fan point controlled by one no, one way 5 Amp switch complete all as specified and directed. Note: (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

All as per item No 2.00 above but One bell / buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 2.00 above but One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board complete all as specified and directed.

All as per item No 2.00 above but One 3 pin 5 Amps socket outlet point controlled by one way switch on same board complete all as specified and directed.

All as per item No 2.00 above but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 socket outlet point on independent board complete all as specified and directed.

All as per item No 2.00 above but point wiring with 4.0 Sqmm single core copper cable and earth continuity wire with 4.0 Sqmm single core cable for one three pin 15 socket outlet point on independent board complete all as specified and directed.

S&F in repair submain wiring alongwith earth wire with 2 run of 4 Sqmm (Main Cable and neutral) and one run of 4 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm dia bore with all fittings accessories complete all as specified and directed. Note: Two run of main cable, one run of earth wire and one run length of PVC conduit of suitable bore shall be considered as one run all as specified.

S&F in repair submain wiring alongwith earth wire with 2 run of 6 Sqmm (Main Cable and neutral) and one run of 6 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm bore with all fittings accessories complete all as specified and directed. Note: Two run of main cable, one run of earth wire and one run length of PVC conduit of suitable bore shall be considered as one run all as specified.

S&F in repair submain wiring alongwith earth wire with 2 run of 10 Sqmm (Main Cable and neutral) and one run of 10 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm bore with all fittings accessories complete all as specified and directed. Note: Two run of main cable, one run of earth wire and one run length of PVC conduit of suitable bore shall be considered as one run all as specified.

S&F in repair flexible wire twin core upto 1 sqmm white color having copper strand complete all as specified and directed.

S&F in replacement of Modular switch 6 amps 250 V AC one way with ISI mark including 6 amps switch frame complete all as specified and directed.

S&F in replacement of modular switch 16 A SP one way 240 volts complete all as specified and directed.

S&F in replacement modular socket 6 A Multi socket for 2 pin and 3 pin 240 volts complete all as specified and directed.

S&F in replacement of modular socket outlet 16 A-2/3 pin combined 240 volts complete all as specified and directed.

S&F in repair modular bell push 6A with Neon 1 module 240 volts complete all as specified and directed.

S&F in replacement switch piano flush button single pole one way 6 amps complete all as specified and directed.

S&F in replacement switch piano flush type 15 amps single pole one way complete all as specified and directed.

S&F in replacement of socket outlet 5/6 amps 2 in 1, 3 pin flush type complete all as specified and directed.

S&F in replacement socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type complete all as specified and directed.

S&F in replacement ceiling rose, 3 phase/ PVC/ polycarbonate isolated body complete all as specified and directed.

S&F in replacement electronic fan regulator modular type 120Watt step type Double Modular as per existing complete all as specified and directed.

S&F in replacement DIMMER/ STEP type electronic fan regulator flush type 230 volts complete all as specified and directed.

S&F in replacement electric bell Ding-Dong AC 230 Volt complete all as specified and directed.

S&F in replacement sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 12 way with 200 amps rated bus bar complete all as specified and directed.

S&F in replacement sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 8 way with 200 amps rated bus bar complete all as specified and directed.

S&F in replacement sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 4 way with 200 amps rated bus bar complete all as specified and directed.

S&F in replacement of MCB SPN 40 to 63 Amp 240 volt 10 KA complete all as specified and directed.

S&F in replacement of MCB SPN 6-32 Amp 240 volt 10 KA complete all as specified and directed.

S&F in replacement MCB SP 6 Amp to 32 Amp 10 KA.240 volts complete all as specified and directed.

S&F in replacement Sheet Metal enclosure with plug top & MCB single pole, 20 Amps 240 volts complete all as specified and directed.

S&F in replacement warm/natural white LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F in replacement LED lights fitting 1x 20W, 220V, AC warm / natural white decorative box type with driver, holder including LED tube light connecting up with three core lexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC warm/ natural white decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement ceiling secure down light circular shaped recess mounted LED light of 6-10 W warm / natural white complete suitable for existing light fittings (dia as per sample) complete all as specified and directed.

S&F in replacement ceiling secure down light circular shaped recess mounted LED light of 10-15 W warm / natural white complete suitable for existing light fittings complete all as specified and directed.

S&F in replacement ceiling secure down light circular shaped recess mounted warm/natural white LED light of 20-24 W warm / natural white complete suitable for existing light fittings 1650lm, (Dia as per sample) complete all as specified and directed.

S&F in replacement 3/5 Watt LED candle type warm white lamp complete suitable for existing lamp complete all as specified and directed.

S&F in replacement 9 watt theread type LED Bulb warm /natural white suitable for existing size complete all as specified and directed.

S&F in replacement 9 watt jallbi type warm/ natural white LED Bulb suitable for existing size complete all as specified and directed.

S&F in replacement LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge. Make: Crompton Cat part No LBHP-10-CDL or equivalent of make as specified in PS.

S&F in replacement mirror light 22 wat LED type WW /NW/CDL made of copper plated metalic body and suitable to mount on wall complete all as specified and directed. Make: Philips cat part No 581999 or equivalent of make as specified in PS.

S&F in replacement step/ foot light LED light 2-5 watt warm/natural white made of PVC body recess type IP 44 complete all as specififed and directed. Make: Philips cat part No 581958 or equivalent of make as specified in PS.

S&F in replacement LED light panel type upto 36 watt 5-8 ft long and 3-6 inch wide having LED profile under PVC body and covered with transparent glass/fiber to give a glarefree light (wattage depend on size seleced by engr in charge) complete all as specified and directed.

S&F in replacement warm/ cool white rope light 140 led per meter with 5 nos adopter to connect as pe design as specified by engr in charge complete all as specified and directed.

S&F in replacement bollard LED light 10 watt inverted pyramid tripod type with soft 360 degree light out door type having resistant to corrosion withbetter optics for uniform distribution complete with suitable driveer & fixing nuts ,bolt and washer complete all as specified and directed. Make: Crompton Cat Part No LBLSN-10-CDL or equivalent of make as specified in PS.

S&F in replacement of LED projector light fixture 36W, LED, RGB/RGBW (DMX512 Compatible), IP 66. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK07. Voltage input 24V DC, 50Hz. The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70- 100,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Minimum Light fixture Lumen output atleast 1440 Lumens @ full power. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements complete all as specified and directed.

S&F in replacement of RGB/RGBW linear wallwasher made of aluminium extrusion, LED Make : CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG, exterior-rated linear luminaire (1000mm), Input Power 18W, DMX512 with inbuilt decoder PCB for individual addressing for programming, Rated input Supply & Fix in replacement of Input Voltage 24V DC, Luminaire luminous flux Minimum range 720Lm. IP protection rating : IP66. The luminaire should have multiple beam angle: 10°, 20, 40, 60°, 10X20° ( as per site requirement) complete all as specified and directed.

S&F in replacement of IP67 power supply system 24V output. Power consumption- 200W complete all as specified and directed.

S&F in replacement of Signal Booster/Splitter with 4-Way output for spreading and amplyfing the DMX Data signals in multiple directions, Input-220-240V AC complete all as specified and directed.

Servicing and testing of 2X512 DMX 512 Controller and synchoronization with the existing DMX controller, Input Power 5-5.5V DC 0.6A, Output Protocol DMX512, Programmability Windows, Mac OS, iOS, Android, Connections Type C USB, XLR3, Ethernet, HE20, battery Memory microSD SD & SDHC, Environment IP20. 0°C - 50°C, Buttons 10 buttons for direct access, 2 buttons to change scene, + 1 button to change zone Dimensions 160x90x45mm 268g, OS Requirements Mac OS X 10.8-10.15, Windows 7/8/10 64bit Standards EC, EMC, ROHS. complete all as specified and directed. Note : this job includes complette service of facade light system and make it operational as per user satifaction

S&F in replacement of DMX Special cable (single pair) having one 22AWG pair stranded (7x30) tinned copper conductors, Datalene (FHDPE) insulation, twisted pairs, overall Beldfoil shield (100% coverage) plus tinned copper braid, PVC jacket Cable (As per sample) complete all as specified and directed.

S&F in replacement of enclosure for Power Supply, Splitter, DMX Controller : Plain sides, grey cover, Degree of protection: IP 66/ IP 67, Impact strenght: IK 08, Material, base: Fiberglass reinforced polycarbonate, Material, cover: Polycarbonate, Material, cover screws: Polyamide, Material, gasket: Polyurethane, Colour: RAL 7035 complete all as specified and directed.

S&F in replacement of high strength exterior rated LED RGB Ground Buried Uplighter luminaires with dedicated optics for architectural lighting. Luminaire has a choice of architectural floodlighting optics with beam angles of 10°/25°/40°/60°. Wattage between 26-34W,with system lumen output of minimum 1072 lumen with all LED ON and operating voltage of 100- 277V AC. Fixture should have high pressure Die-cast aluminium body with cover of stainless steel and buried barrel of high-quality corrosion resistant nulon with high strength toughened glass which can withstand a weight of 2500 KG and should have 24 no. of LED,s. Luminaire lifetime of 70,000 hours at 50 degree Centigrade @L70 and IP67 & IK10 protection against weather. Fixture should have Height 185 mm±1% and outer dia of 240 mm±1%. The light fixture should be programmable using 8 bit control DMX512 protocol with Operating Temperature Range from -10ºC to 50ºC. LED complete all as specified and directed. Note: Work should be complete with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. as per site required Suitable fixing arrangement , Foundation as required complete included in all respect as per direction of Engineer in Charge.

S&F in repair fan capacitor of capacity 1.5 Mfd complete all as specified and directed.

S&F in repair fan capacitor of capacity 2.5 Mfd complete all as specified and directed.

S&F in repair non metallic rigid PVC conduit medium grade upto 50 mm dia, ISI Mark complete all as specified and directed.

S&F in replacement ceiling fans complete with blades, down rods, accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ceiling fan of color white or ( as per site requirment ) complete with all accessories internally pre wired and including connecting up with three core flexible copper conductor cable with suitable size and making arrangement to hanging of fan to ceiling with proper hook nut bolt complete all as specified and directed. Note : The old u/s ceiling fan 1200/1400 mm sweep to be deposited in MES store yard in safe custody

S&F in replacement PVC body ventilation fans AC single phase 230/240 V of size 250 mm sweep (as per sample metal/pvc) complete all as specified and directed. Note: The old unsv fan to be deposited in MES store yard in safe custody.

S&F in replacement PVC body ventilation fans AC single phase 230/240 V of size 160 mm sweep (as per sample metal/pvc ) complete all as specified and directed. Note: The old unsv fan to be deposited in MES store yard in safe custody.

Taking down carefully Geysers 25/50 Ltr capacity, opening for inspection, , cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, Nuts, bolts, neon indicator lamp 1 Amp etc complete all as specified and directed.

M&L for spray painting (white colour) with synthetic enamel paint to Geysers 25/50 Liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and directed by Engineer-in-charge.

S&F in repair heating element of 2.0 KW (Rectangle/triangle /circular ) as required at site including rubber washers (ISI marked) etc complete all as specified and directed.

S&F in repair storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 50 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank complete all as specified and directed.

S&F in repair storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank complete all as specified and directed.

S&F in replacement base plate assembly 20 SWG heavy duty suitable for 50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample) complete all as specified and directed.

S&F in replacement base plate assembly 20 SWG heavy duty suitable for 25 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample) complete all as specified and directed.

Supply & Fixing in replacement chromium plated copper connection pipe 600/ 1000mm long with two brass adopters washers and connecting up complete all as specified and directed.

S&F in replacement PVC connection pipe 450mm long with two brass adopters washers and connecting up complete ISI mark complete all as specified and directed by Engr-in Charge.

S&F in replacement thermostat (ISI Marked) for 50 Liters capacity Geyser complete all as specified and directed. Make : Daspass/Theeta/TTE

S&F in replacement thermostat (ISI Marked) for 25 Liters capacity Geyser complete all as specified and directed. Make : Daspass/Theeta/TTE

Supply and fix in replacement mild steel hole fastner 10mm dia, 100mm long including nut and washer complete all as specified and directed.

S&F in replacement of 100 Amp changeover switch complete all as specified and directed.

S&F in replacement 1 modules incl white plate with cover complete all as specified and directed.

S&F in replacement 3 modules incl white plate with cover complete all as specified and directed.

S&F in replacement 4 modules incl white plate with cover complete all as specified and directed.

S&F in replacement 8 modules incl white plate with cover complete all as specified and directed.

S&F in replacement blanking plate for switch complete wherever required complete all as specified and directed.

M&L in replacement for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected togalvanised iron (wire 4mm) as earthinglead lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 5 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc (NOTE:-GI earth streep 7.5m will be measured and paid separately) complete all as specified and directed.

S & F in replacement metal clad AC plug,20A , 230V AC complete all as specified and directed.

S & F in replacement metal clad AC socket,20A , 230V AC complete all as specified and directed.

S&F in replacement Wall Mounted indoor type factory made load line DB s double door made out of CRCA mild steel sheet with insulating material like polyester powder coated surface mounted 4 way VTPN 415 volts IP 43 protection with suitable bus bar neutral link and earth link suitable for 4 pole MCCB of 125 A as incoming and SP/TP mcb of rating 5 to 100 amp as outgoing complete all as specified and directed.

S&F in replacement Wall Mounted indoor type factory made load line DB s double door made out of CRCA mild steel sheet with insulating material like polyester powder coated surface mounted 8 way VTPN 415 volts IP 43 protection with suitable bus bar neutral link and earth link suitable for 4 pole MCCB of 160 A as incoming and SP/TP mcb of rating 5 to 100 amp as outgoing complete all as specified and directed.

S&F in replacement Wall Mounted indoor type factory made load line DB s double door made out of CRCA mild steel sheet with insulating material like polyester powder coated surface mounted 12 way VTPN 415 volts IP 43 protection with suitable bus bar neutral link and earth link suitable for 4 pole MCCB of 200 A as incoming and SP/TP mcb of rating 5 to 100 amp as outgoing complete all as specified and directed.

S&F in replacement MCCB TPN 100 Amp, 25kA thermal type complete all as specified and directed.

S&F in replacement MCCB TPN 125 Amp, 25kA thermal type complete all as specified and directed.

S&F in replacement MCCB TPN 160 Amp, 25kA thermal type complete all as specified and directed.

S&F in replacement MCCB TPN 200 Amp, 25kA thermal type complete all as specified and directed.

S&F in repair modular AC /Geyser plug - socket PVC body with mini MCB of 20 Amp complete all as specifeied and direted

S&F in replacement aesthetically designed Wall mounted decorative wall LED light of 15 W fixture with opal diffuser to give glare free light including suitable LED lamp of 15 W, complete all as specified and directed. Make: Philips CAT Part No Muziris 31434, Lustre CAT Part No Li 3618/IW, Wipro CAT Part No BW06

S&F in replacement warm white LED light fitting suitable for mounting on photo frame/ mirror consisting of 6-12 watt LED strip warm white 230 volts complete all as specified and directed.

S&F in replacement wall mounted circular LED light bulkhead type 15W, complete all as specified and directed. Make: Philips CAT Part No. 929003670701 CERCO, Crompton CAT Part No. LCDSPLN-R-12-CDL, Panasonic CAT Part No.PPAM16127

S&F in replacement Wall mounted decorative bedlight LED light of 3 W goosenek arm easy to adjust premium material white metal 75lm/3000K and finish energy saving with LED light source fixture, complete all as specified and directed. Make: Philips CAT Part No.30975, Legrand, CAT Part No Lyncus Reading light 677316, IKEA Nymne CAT Part No.GU573671.

S&F in replacement exhaust fan, steel body AC single Phase. 230V of size250 mm weep with, blades, and frame and louvers complete all as specified and direced. Note : The old u/s exhaust fan 230 mm sweep to be deposited in MES store yard in safe custody

S&F in repairs of Mild steel 'U' clamps with rubber reel, bolts, nuts, washers and safety pin complete all as specified and directed.

S&F in repair decorative laminated T cover sheet 3mm thick of size 2/3 inch dia complete all as specified and directed.

S&F in replacement LED Bulb inverter type, 15 watt, suitable for fitting in pendant holder complete all as specified and directed.

S&F in replacement PVC gang box with Cover plate 2/3 module suitable for fitting one 5 A switch/socket complete all as specified and directed.

S&F in replacement PVC gang box with cover four module suitable for fitting one15A switch and one socket complete all as specified and directed.

S&F in replacement PVC gang box with cover 6 module suitable for fitting switch and socket complete all as specified and directed.

S&F in replacement FRLS PVC insulated unsheathed single core 3 run/mtr of stranded copper conductor Cable of size 1.5 sqmm 1100 volt grade complete all as specified and directed.

S&F in replacement FRLS PVC insulated unsheathed single core 3 run /mtr of stranded copper conductor Cable of size 2.5 sqmm 1100 volt grade complete all as specified and directed.

S&F in replacement FRLS PVC insulated unsheathed single core 3 run /mtr submain of stranded copper conductor Cable of size 4.0 sqmm 1100 volt grade complete all as specified and directed.

S&F in replacement FRLS PVC insulated unsheathed single core 3 run /mtr submain of stranded copper conductor Cable of size 6.0 sqmm 1100 volt grade complete all as specified and directed.

S&F in replacement FRLS PVC insulated unsheathed single core 3 run /mtr submain of stranded copper conductor Cable of size 10 sqmm 1100 volt grade complete all as specified and directed.

S&F in replacement stranded coppe Cable (thimbal) lugs of size 10.0 sqmm complete all as specified and directed.

S&F in replacement stranded coppe Cable (thimbal) lugs of size 6.0 sqmm complete all as specified and directed.

S&F in repair Rigid non-metallic PVC conduit 20 mm dia including of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for lan/ telephone circuits complete all as specified and directed. Note : Work includes cutting of chases on wall and making good disturbed surfaces.

S&F in repair casing - caping any size upto 50 mm width completet with its accessories complete all as specified and directed.

S&F in repair safety nut for high pressure release (As per sample) complete all as specified and directed.

S&F in repair top cover for geysers of 25/50 ltrs capacity of any make as required at site duly painted with two coats of Synthetic enamel spray paint (first quality) complete all as specified and directed.

S&F in repair bottom cover for geysers of 25/50 ltr any make required at site duly painted with synthetic enamel spray paint (first quality) with inspection plate in two pieces complete all as specified and directed.

S&F in repair of outer cover for geyser made out of MS sheet suitable for 25 ltrs capacity geyser vertical/horizontal type complete all as specified and directed.

S&F in repair indicator lamp (Red & Green) 230 volts suitable for Geyser (as per sample) complete all as specified and directed.

M&L in repair Earthling complete with galvanised steel earth plate electrode, 600x600x6mm thick, buried directly in ground vertically to depth not less than 1.5 meters below normal ground level, connected to galvanised iron earthing strip 25x4mm by means of bolts, nuts, check nuts including necessary excavation and earth work (in any type of strata ) and washers of galvanised iron or steel, CGI watering pipe 20mm bore light grade with funnel and wire mesh, PCC chamber in cement concrete 1:3:6 type c1, 80mm thick pre-cast RCC 1:2:4, type B-1 cover reinforced earth plate surrounded by alternate layers of packed charcoal, salt oacked which shall not be less than 15cm in all side of earth plate complete all as shown in electrical plate No 3 of MES schedule Part-I. complete all as specified and directed by Engr-in-charge.

M&L for servicng of electric chimney including cleaning of filter ,duct pipe ,greasing of motor and other connected item complete all as specified and directed.

M&L for ducting of electric chimney upto 9 mtr length complete set including taking down old existing ducting complete all as specified and directed.

M&L for replacement of motor for electric chimney as per sample complete all as specified and directed.

SANJEEV ENTERPRISES (BID ID -3217010)

RUCHIKA ENGG.WORKS (BID ID -3217346)

RAJDHANI ENTERPRISES (BID ID -3218085)