Minor repair and painting in set no. 1, 3 and 4 Type-V at main campus Nauni, Solan.

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared etc. complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) (Actiontesa/Green Lam make). a)18 mm thick

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length etc. complete in all respect as per satisfaction of Engineer-in-Charge. ( hold fast lugs or dash fastener shall be paid for separately). a).Sal wood

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Sal wood

Providing and fixing Kiln seasoned and chemically treated hollock wood 50x12 mm wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete in all respect as per satisfaction of Engineer-in-Charge.

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) 20 mm dia (heavy type)

Renewing glass panes, with wooden fillets wherever necessary complete in all respect as per satisfaction of Engineer-in-Charge. a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and fixing ISI marked oxidized/ chromium plated M.S. single acting spring hinges with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge.a)150 mm (one hundred fifty milimetre) level etc. complete in all respect as per satisfaction of Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 200x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a).125mm

Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a)150 mm

Providing and fixing fly proof galvanized MS wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm etc. complete in all respect as per satisfaction of Engineer-in-charge a). Second class teak wood beading 62 into 19 mm.

Providing and fixing Kiln seasoned and chemically treated hollock wood 35 mm thick. glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. complete in all respect as per satisfaction of Engineer-in-Charge. (i) Single socketed pipes a). 110 mm(one hundred ten milimetre) diameter(Finolex/ D-Plast/ Vectus/ Kisan/ Prayag Make).

Providing and fixing on wall face unplasticised – PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. complete in all respect as per satisfaction of Engineer-in-Charge. etc. complete in all respect as per satisfaction of Engineer-in-Charge.. a).Bend 87.5° 110 mm dia

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete in all respect as per satisfaction of Engineer-in-Charge.(TATA/ JINDAL MAKE)

Finishing walls with Acrylic Smooth exterior paint of required shade level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Old work (One or more coat applied @ 0.90 ltr/10 sqm).

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (one cement: six sand) etc. complete as per architectural drawings and directions of engineer- in-charge.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as required complete in all respect as per satisfaction of Engineer-in-Charge.a) Two or more coats on new work.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade etc. in all respect as per satisfaction of Engineer-in-Charge..a) One or more coats on old work

Painting with aluminium paint of approved brand and manufacture to give an even shade level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade etc. in all respect as per satisfaction of Engineer-in-Charge..a) One or more coats on old work

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. a).With cement mortar 1:4 (one cement : four sand)

Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 meters lead level etc. complete in all respect as per satisfaction of Engineer-in-Charge.

Providing and fixing in position L D- 2.5 pre-cast R.C.C. manhole cover and frame of required shape and approved quality level etc. complete in all respect as per satisfaction of Engineer-in-Charge.

a)Rectangular shape 600x450 mm internal dimensions

b)Square shape 450 mm internal dimensions

Providing and fixing 32mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings etc. complete in all respect as per satisfaction of Engineer-in-Charge.

shashikant