Construction of new building for the o/o AEE/Rural/Tirupur

Earth work excavating and depositing on bank with initial lead of 10m and initial lifd of 2m in hard stiff clay. Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders, as per standard specification, etc., complete.

Earth work excavation and depositing on bank with initial lead of 10m and Initial lift of 2m in Soft Disintegrated rock, laterite, soft rock or kankar, not requiring blastng including labour, lead, lift, etc., complete as per standard specification

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in medium rock and dense medium rock, not requiring blastng including labour, lead, lift, etc., complete as per standard specification

Supplying and filling with M. sand for foundation including cost of all materials, well consolidation, labour, lead,lift, etc. complete.

PCC 1:3:6, using 20mm HBG metal for foundation including cost of cement, all materials, labour, curing, lead, lift, etc. complete

RCC 1:1.5:3 using 12-20 mm hard machine broken granite stone for raft foundation including cost of all materials, centering, curing, labour, lead, lift, etc. complete. but excluding cost of steel reinforcement.

RCC 1:1.5:3 using 12-20 mm hard machine broken granite stone for columns upto Ground level including cost of all materials, form work, centering, curing, labour, lead, lift, etc. complete.but excluding cost of steel reinforcement

RCC 1:1.5:3 using 12-20 mm hard machine broken granite stone for columns above Ground level including cost of all materials, form work, centering, curing, labour, lead, lift, etc. complete. but excluding cost of steel reinforcement

RCC 1:1.5:3 using 12-20 mm hard machine broken granite stone for Ground level beam for stair case including cost of all materials, form work, centering, curing, labour, lead, lift, etc. complete. but excluding cost of steel reinforcement.

RCC 1:1.5:3 using 12-20 mm hard machine broken granite stone for landing beam for stair case including cost of all materials, form work, centering, curing, labour, lead, lift, etc. complete. but excluding cost of steel reinforcement.

Reinforced cement concrete in CC 1: 1 1/2: 3 mix using 12mm to 20mm HBG machine crushed metal for Lintel beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering all lead, lifts, as per standard specification, etc., complete.but excluding cost of steel reinforcement.

RCC 1:1.5:3 using 12-20 mm hard machine broken granite stone for roof beam including cost of all materials, form work, centering, curing, labour, lead, lift, etc. complete.but excluding cost of steel reinforcement.

RCC 1:1.5:3 using 12-20 mm hard machine broken granite stone for landing slab for stair case of 125 mm tk including cost of all materials, form work, centering, curing, labour, lead, lift, etc. complete.but excluding cost of steel reinforcement.

RCC 1:1.5:3 using 12-20 mm hard machine broken granite stone for roof slab of 125 mm tk including cost of all materials, form work, centering, curing, labour, lead, lift, etc. complete.but excluding cost of steel reinforcement.

RCC 1:1.5:3 using 12-20mm hard machine broken granite stone forl loft of 75 cm projection with 75mm tk including cost of all materials, form work, centering, curing, labour, lead, lift, etc. complete.but excluding cost of steel reinforcement.

RCC 1:1.5:3 using 12-20mm hard machine broken granite stone for Sunshades of 600 mm width and 80mm thick at wall end and 50 mm at free end including cost of all materials, form work, centering, curing, labour, lead, lift, etc. complete.but excluding cost of steel reinforcement.

Brick work in CM 1:5 using II class champer burnt bricks for walls including cost of all materials, curing,labour, lead, lift, etc. complete.

Brick work in CM 1:3 using II class champer burnt bricks for steps and partition walls etc., including cost of all materials, curing, labour , lead, lift, etc. complete.

Plastering with CM 1:5, 12mm thick including cost of all materials, labour, curing, lead, lift, etc. complete.

Plastering with cm 1:3, 12mm thick for ceiling, beams, sunshade steps etc.,including cost of cement, all materials,curing, labour, lead, lift, etc., complete.

Removing the existing weathering course with tiles incluidng cost of labour lead, lift, etc., complete .

PCC 1:2:4 mix using 6 mm and 10 mm HBG metal of a average thickness of 0.075 m with water proofing compound and finishing the top with solar reflective tiles including cost of all materials,pointing, labour, curing, finishing with proper slope, lead,lift, etc., complete as per the direction of site incharge.

Supplying and laying of Vitrified floor tiles for of size 600 x 600 x 8 mm for Control room etc., of approved quality and colour laid in CM. 1:3 , 20 mm thick and pointing with white cement using 0.40 Kg/m2 including finishing joint and pointing flush with tiles surface including cost of cement, all materials,labour,curing, leads and lifts etc., complete.

Supplying and laying of Non - slippery type ceramic floor tiles of 305x305x6 mm for bath and steps etc., of approved size, quality and colour laid in CM. 1:3, 20 mm thick and pointing with white cement using 0.40Kg./m2 including finishing joint and pointing flush with tiles surface including cost of cement, all materials, labour, curing, lead, lift etc., complete.

Dadooing wall with glazed tiles of approved colour of required size with 6 mm thick of approved quality laid in CM.1:2 ,10 mm thick after scrapping & cleaning the existing wall surface as instructed and pointing with white cement using 0.40Kg /m2 including finishing the joint and pointing flush with tiles surface including cost of cement all materials labour curing , leads lifts etc.,complete as per standard specification

Providing UPVC Door and fixing casement doors fabricated from unplasticized polyvinyl chloride9UPVC) sections .The Profile should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm.The window unit should be designed with all corner joint mired and fusion welded.windows should be steel reinforced with 25x24x25mm steel reinforced with thickness of 1mm to have dimensional stability.The sash should be of 602x102mm. The mullion should be of 60x74mm.The profile should have coextruded seals with necessary hardwares and the window system should be glazed with 5 mm plain float glass/6mm bison lam including cost of all materials , lead, lift , etc. complete, as per standard specification .

Supplying and fixing of solid PVC panelled door shutters hollow type 200x20 mm panels with 1mm wall thickness for panels and style and rails of suitable sixe with 2 mm wall tk suitablity reinforced using MS Angle /Flat including cost of necessary aluminum hinges and other furniture fittings,including cost oa all materials ,labour ,lead ,lift etc,. complete

Supplying and fixing UPVC (Un-Plasticized Chloride) Windows of casement type (open) from the profile the size of oter rame 60mmx58mm and shutter profile are reinforcement with GI/1mm 125 GSM and 100% corrosion free the profiles are multi chambered sections with wall thick of 2mm . The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Esbag multi power point locks and also it operates as handle. The corners and joints shold be welded and cleaned. Radiations free pin headed plain or brown color glas 4mm thick should be provided to the htter and it shold not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size or arresting noise and enerty loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved rom the Executive Engineer before use on work.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of rom the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black color) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all rond the frames. The ventilator should be got approved from the Executive Engineer before use on work.

Supplying and fixing of window grills including cost of all materials leads and lifts etc., complete and as directed by Engineer at site.

Providing steel reinforcement with MS/RTS rods of reputed approved make for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, Minor T & Ps labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift etc., complete as per standard specification

Painting two coats with enamel paint of approved quality and make over one coat of primer including cost of all materials, lead, lift, labour charges, etc., complete.

White washing two coats with white cement over one coat of primer for ceiling etc.,including cost of all materials,labour, lead, lift, etc., complete.

Colour washing two coats of oil bound distember of approved quality and make over one coat fo primer for inner wall surface including cost of all materials, lead, lift, labour charges, etc., complete.

Colour washing two coats of cement paint of approved quality and make over one coat fo primer for outer wall surface including cost of all materials, lead, lift, labour charges, etc., complete.

Providing 110mm dia PVC down fall pipe of 4 Kg / sq cm. including cost of pipe, door bend, shoe and clamp, labour for fixing in position from the roof top, lead, lift, etc., complete.

Supplying and laying of 110 mm PVC pipe 6 kg/Sqcm of approved ISI make for sewer line including cost of pvc pipe coupling labour for cutting, laying in proper alignment, etc., including earth work excavation and refilling trench, etc., complete

Supplying and laying 32 mm dia PVC pipe to withstand the pressure of 10 kg/sq.cm. of approved make including cost of PVC pipe and specials, labour for cutting, laying etc ,lead,lift etc,complete.

Supplying and fixing in position of 32 mm dia gun metal gate valve of approved make of best quality including cost of materials, labour, lead, lift, etc., complete as directed by department Engineer at site

Supplying and laying 25 mm dia PVC pipe to withstand the pressure of 10 kg/sq.cm. of approved make including cost of PVC pipe and specials, labour for cutting, laying etc ,lead,lift etc,complete

Supplying and fixing in position of 25 mm dia gun metal gate valve of approved make of best quality including cost of materials, labour, lead, lift, etc., complete as directed by department Engineer at site

Supplying and fixing 100 x 75 mm PVC floor trap in bath room with PVC bend including cost of all labour,lead,lift,etc., complete.

Supplying and fixing Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm dia for water supply tap including cost fo pipe and labour for fixing charges, lead, lift, as per standard specification etc., complete.

Supplying and fixing 110mm dia. PVC Tee of ISI make including cost of all materials, labour, lead, lift, as per standard specification, etc., complete.

Supplying and fixing in position of Oriya type Indian water closet of size 580 X 440mm of approved make & quality with 'P' or 'S' trap with sand cushion and forming flooring around the closet using 40 mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift,T&P,etc. complete with standard specification .

Supplying and fixing in position of floor mount European water closet of approved make & quality with 'P' or 'S' trap,flushing tank with all accessories, labour ,cost of all materials,lead,lift etc,complete.

Supplying and fixing of wash basin of size 550x400 mm with pedestal of approved quality and make with all accessories such as cast iron brackets,32 mm dia CP waste coupling 32 mm B class GI Waste pipe, 15mm dia pvc connecting hose,GM Gate valve,15 mm dia CP Pillar tap etc.,with all accessories including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing in position of best quality of PVC/Fibre glass framed mirror of size 500 x 400 mm,5.5 mm tk and chromium plated towel rod of size 0.6 m and soap tray of size 150x100 mm including cost of all materials,labour, lead lift, etc complete as directed by department Engineer at site

Wiring with 2 x 1.5 sq mm PVC unsheathed multistrand copper cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall and covering with 3mm thick hylum sheet with steel switch box with continuous earth wire connection 14 SWG TC wire and making good the damaged portion of masonry for PVC concealed light point / fan point (for electronic regulator).

Wring with 2 x 1.50 Sq mm PVC unsheathed multistrand copper cables of 1100 V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable steel switch box with 3mm tick hylum sheet covers for 5 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed plug point.

Wring with 2x 4 Sq mm PVC unsheathed multistrand copper cables of 1100 V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable TW switch box with 3mm tick hylum sheet covers for 15 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed power plug point.

Supply and fixing of LED 20W -tube light set Crompton /Philips make or equivalent type on wall on ceiling incluiding fititng,labour, lead,lift etc,complete .

Supply and fixing of 1200mm (48") sweep AC ceiling fan with 300mm down rod of approved quality and make with with electronic regulators including cost of all materials, labour, fixing charges , etc., complete.

Supply and fixing of bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) with 9 W LED bulb with guard including cost of all materials, lead, lift, fixing charges, etc., complete

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board with 1 No 32A 4 pole DPIC switch of 500 V as incoming and 6 Nos. 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with PWD earth connection including cost of all materials, labour, lead, lift, etc., complete as per standard specification.

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32 Amps fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375x300x19mm with supporting TW reepers of 1" thick on either side with painting with suitable bolt and nuts for fixing the plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire to fuse unt including cost of all materials, labour, lead, lift, etc., complete as per standard specification

Supply and laying of 4 x 16 sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75m putting 0.15m layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and laying of 2 x 6 sqmm PVC armoured LTUG cable on wall with suitable clamps, cost of all material labour lead lifts etc complete.

Providing Sintex water tank of capacity of 500 lits including cost of material, labour, lead, lift, transportation and placing in position over head room etc., as directed by the engineer at site.

SUB TOTAL (Items 1 to 59)

EPF @ 13.00 % on 40 % of (Items 1 to 59)

ESI @ 3.25 % on 40 % of (Items 1 to 59)