Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹23.4 L+₹3.6 L (18.3%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹37.8 L+₹18.1 L (91.3%)Rejected-Finance BLOCK NO 2 FLAT NO 17 FIRST FLOOR KENDRIYA VIHAR PARUTHIPATTU AVADI CHENNAI 600 071 | CHENNAI | CHENNAI | TAMIL NADU | 600071 | L3 | Rejected-Finance L3 | |
| 4 | L4₹46.2 L+₹26.4 L (133.6%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | Rejected-Technical | - | Rejected-Technical Not Enlisted in Appropriate Category |
Tender Value
₹32.9 L
EMD Value
₹65,800
Closing Date
16 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER NAVY LAKSHADWEEP
Military Engineer Services, GE Navy Lakshadweep, Coast Guard Road, Kavaratti Island, Lakshadweep - 682555.
REPAIRS TO WOODEN AND STEEL FURNITURE INCLUDING BED HARD/CHARPOY IP HARD TOP AT KAVARATTI, ANDROTH AND MINICOY UNDER BSO KAVARATTI , GE NAVY LAKSHADWEEP
2022_MES_561753_2
8349/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
GE NAVY LAKSHADWEEP
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER NAVY LAKSHADWEEP
₹65,800
Yes
25 Jan 2023
26 Nov 2022
19 Dec 2022
26 Nov 2022
16 Dec 2022
2 Dec 2022
Amount
Repairs To Sofa Set 4/5 seater (FD-281) : a) Removing of worn out upholstery & U Foam and Supplying and fixing new U- foam cushion (ISI Marked)40 Density of size as per Drg including long cloth lining inside and new tapestry cloth cover as per sample of approved shade duly stitched and provided with nylon zip, the cost of tapestry shall not be less than Rs 400/- per mtr, as shown on drg and as directed by Engineer-in-Charge. Note:-(Each cushion with tapestry cover shall be measured and paid as one unit) Make of foam cushion:-Sleepwell/Dunlop/Featherlite/Kurlon or equivalent make as approved by GE Make of Tapestry cloth:-Dedecor/Raymonds/Bombay Dyeing or equivalent make as approved by GE
b) Removing the existing broken/damaged arms of sofa and supply and fix new arms of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish,etc complete as shown on drg and as directed by Engineer-in-Charge. Note:- (i)Each arm will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted. Make of polish:-Sheenlac/Tower/Naidu/Touchwood/Kohinoor or equivalent make as approved by GE
c) Removing the existing broken/damaged legs of sofa and supply and fix new legs of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish,etc complete as shown on drg and as directed by Engineer-in-Charge. Note:-(i)Each leg will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted. Make of polish:- Sheenlac/Tower/Naidu/Touchwood or equivalent make as approved by GE
d) Removing the existing broken/damaged front and rear rails of single seater sofa of sofa and supply and fix new long rails of single seater sofa of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish,etc complete as shown on drg and as directed by Engineer-in-Charge. Note:-(i)Each rail will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted. Make of polish:- Sheenlac/Tower/Naidu/Touchwood or equivalent make as approved by GE
e) Removing the existing broken/damaged battens and supply and fix new battens of sofa of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish,etc complete as shown on drg and as directed by Engineer-in-Charge. Note:-(i)Each batten will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted. Make of polish:-Sheenlac/Tower/Naidu/Touchwood/Kohinoor or equivalent make as approved by GE
f) Prepare the existing surface of wooden furniture of any description by applying sand paper, removing the stains and filling the bore holes, cracks by putting bees wax and chalk powder etc, and apply french polish to the exposed surface. Polishing shall be uniform and shall be glossy finish for sofa set FD-281 as directed by Engr-in-Charge. Make of polish:- Sheenlac/Tower/Naidu/Touchwood/Kohinoor or equivalent make as approved by GE
g) Removing of worn out tapestry cloth and supply of new tapestry cloth for cushions of 40 D size as per existing pattern duly stitched along with zip facility ,Tapestry cover as approved by Engg-in-Charge and the cost of tapestry shall not be less than Rs 400/- per mtr, all as specified and as directed by Engineer-in-Charge.
Removing of old unserviceable plastic cane of chair dining (FD-16(M)/228/279), Chair easy (FD-17(M)/201/229), Chair writing (FD-20(M)/202 /250/280), and recanning with approved quality cane plastic 2mm/3mm/4mm, after tightning the loose chairs/stool and french polishing to the structures of chair all as specified and as directed by Engineer-in-Charge. Make of cane plastic : Godrej/Maharastra plastic or equivalent make as approved by GE
Repairs to Chair Dining (FD-279) (a) Removing the unserviceable front legs and supply and fix new sesaned teak wood leg duly polished all as per drg and as directed by Engr-in-Charge.
(b) Description all as per Sl Item No. 9 above but back leg only.
(c) Removing the unserviceable side rails of seat frame and supply and fix new teak wood side rail duly polished , as shown on drg and as directed by Engineer-in-Charge.
(d) Description all as per Sl Item No. 9 above but front rail of seat frame.
(e) Description all as per Sl Item No. 9 above but back rail of seat frame.
(f) Removing the unserviceable centre stifefners and supply and fix new sesaned teak wood stiffeners duly polished and all as shown on drg and as directed by Engineer-in-Charge.
(g) Removing the unserviceable bottom (seat) stiffeners and supply and fix new sesaned teak wood stiffener duly polished all as shown on drg and as directed by Engineer-in-Charge. Note: Three Nos of stiffners measured as one unit
Repairs to Chair Writing (FD-280) (a) Removing the unserviceable broken back leg and supply and fix new sesaned teak wood leg duly polished all as per drg and as directed by Engr-in-Charge.
(b) Description all as per Sl Item No.16 above but front leg only.
(c) Removing the unserviceable side rails of seat frame and supply and fix new sesaned teak wood side rail duly polished, the caning holes 12.5mm centre to centre all as shown on drg and as directed by Engineer-in-Charge.
(d) Description all as per Sl Item No. 16 above but front rail of seat frame.
(e) Description all as per Sl Item No. 16 above but rear rail of seat frame.
(f) Removing the unserviceable arm rest and supply and fix new sesaned teak wood arm rest duly polished all as shown on drg and as directed by Engineer-in-Charge.
(g) Removing the unserviceable back rest stiffener and supply and fix new sesaned teak wood stiffenerduly polished and all as shown on drg and as directed by Engineer-in-Charge.
(h) Removing the unserviceable bottom stiffener and supply and fix new sesaned teak wood stiffener duly polished and all as shown on drg and as directed by Engineer-in-Charge. Note: Three Nos of stiffners measured as one unit
Repairs to Chair Easy (FD-229) (a) Removing the unserviceable front legs and supply and fix new sesaned teak wood leg duly polished as per drg and as directed by Engr-in-Charge.
(b) Description all as per Sl Item No. 24 above but back legs only.
(c) Removing the unserviceable side rails of seat frame and supply and fix new sesaned teak wood side rail duly polished as per drg.The caning holes 12.5mm centre to centre all as shown on drg and as directed by Engineer-in-Charge.
(d) Description all as per Sl Item No. 24 above but front rail of seat frame.
(e) Description all as per Sl Item No.24 above but back rail of seat frame.
(f) Removing the unserviceable top of horizontal rail of the back rest frame and S/F of new sesaned teak wood rail duly polished all as shown on drg and as directed by Engineer-in-Charge.
(g) Description all as per Sl Item No. 24 above but bottom harizantal rail of back rest frame as shown on drg and as directed by Engineer-in-Charge.
(h) Description all as per Sl Item No. 24 above but side rail of back rest frame as shown on drg and as directed by Engineer-in-Charge.
(j) Removing the unserviceable arm rest and supply and fix new sesaned teak wood arm rest duly polished all as shown on drg and as directed by Engineer-in-Charge.
Repairs to Chair Easy Cushioned (FD 358) Repair to chair and Removing the unserviceable worn out cloth tapestry and cushion from chair back and seat. supply and fix new cushion Density 40 and tapestry cloth (quality and shade as approved by GE) to match the original all as shown on drg and as directed by Engineer-in-Charge. Make of cushion:-Kurlon/Sleepwell/Dunlop/Featherlite or equivalent as approved by GE Make of tapestry cloth:-Dedecor/Raymonds/Bombay Dyeing or equivalent as approved by GE Note:- Each chair (seat and back) measured as single unit and Cost of tapestry not less than Rs 360.00 Per mtr.
Repairs to TABLE DINING 8 PERSONS (FD- 273) (a) Removing the existing unserviceable damaged top and tightining of the frame supply and fix top with a new prelaminated particle board 18mm ISI mark with 4mm thick teak wood edging all round all as shown on drg and as directed by Engineer-in-Charge. Make of prelaminated Particle Board: Anchorlam/Novapan/Ecobaord Industries/Kitply/Greenply/ Bhutan Bd as approved by GE
(b) Removing unserviceable legs from table dinning 8 persons and supply and fix new legs of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.
(c) Removing unserviceable long rail from table dinning 8 persons and supply and fix new long rail of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.
(d) Description all as per Sl Item No 34 above but short rail all as shown on drg and as directed by Engineer-in-Charge.
(e) Removing unserviceable wooden corner bracket from table dinning 8 persons and supply and fix new bracket of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.
Repairs to Table Bedside Steel (MAP)(FD/E6/MAP/15(R) Repairs by removing the damaged sides and providing new sides made out of 18mm thick prelaminated particle board and providing new members, including french polish to the structure of Table Bedside steel (MAP) all as specified and as shown on drg and as directed by Engineer-in-Charge.
a) Description all as per Sl Item No.39 here in before but Back made out of 12 mm thick commercial plywood.
b) Description all as per Sl Item No.39 here in before but Top / Shelves made out of 12mm thick prelaminated particle board.
c) Description all as per Sl Item No.39 here in before but Knobs
Repairs to Peg table FD-384/277 (a) Removing the existing unserviceable top from peg table and tightning of the frame and supply and fix new top of prelaminated particle board 18mm ISI mark with 4mm thick teak wood edging all round all as specified and as shown on drg and as directed by Engineer-in-Charge. Make of prelaminated Particle Board: Anchorlam/Novapan/Ecobaord Industries/Kitply/Greenply/ Bhutan Bd as approved by GE
(b) Removing unserviceable legs from peg table and supply and fix new legs of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.
(c) Removing unserviceable long rail from peg table and supply and fix new long rail of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.
(d) Description all as per Sl Item No 43 above but short rail as shown on drg and as directed by Engineer-in-Charge.
Repairs toTABLE 900X600x760mm WITH DRAWER FD-283 (a) Removing the existing unserviceable table top and supply and fix new top of prelaminated particle board 18mm ISI mark with 4mm thick teak wood edging all round all as specified and as shown on drg and as directed by Engineer-in-Charge. Make of prelaminated Particle Board: Anchorlam/Novapan/Ecobaord Industries/Kitply/Greenply/ Bhutan Bd as approved by GE
(b) Removing unserviceable legs from table and supply and fix new legs of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.
(c) Removing unserviceable long rail from table and supply and fix new long rail of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.
(d) Description all as per Sl Item No 47 above but short rail as shown on drg and as directed by Engineer-in-Charge.
(e) Repair and replacement of new drawer of table made to shape and size, front/Back and both sides shall be well sesaned teak wood duly polished with 1 No. knob as per drg and as directed by Engr-in-Charge.
Repairs to TABLE CENTRE FD-274 (a) Removing the existing unserviceable table top and tightning of the frame and supply and fix new top of prelaminated particle board 18mm ISI mark with 4mm thick teak wood edging all round all as specified and as shown on drg and as directed by Engineer-in-Charge. Make of prelaminated Particle Board: Anchorlam/Novapan/Ecobaord Industries/Kitply/Greenply/ Bhutan Bd as approved by GE
(b) Removing unserviceable legs from table and supply and fix new legs of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.
(c) Removing unserviceable long rail from table and supply and fix new long rail of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.
(d) Description all as per Sl Item No 52 above but short rail as shown on drg and as directed by Engineer-in-Charge.
Removing the existing damaged/broken GI long rail and supply and fix new long rail of 32mm dia medium grade including cutting/threading and fixing to GI Charpoy all as specified and directed by Engr-in-charge.
Removing the existing damaged/broken GI short rail and providing GI short rail from the damged long rail obtained from Sl item No. 56 above, including cutting/threading and fixing to GI Charpoy all as specified and directed by Engr-in-charge.
Removing the existing damaged/broken GI leg and providing GI leg from the damaged Long rail / short rail obtained from Sl item No. 56 & 57 above, including cutting/threading and fixing to GI Charpoy all as specified and directed by Engr-in-charge.
Removing the existing damaged/broken GI Elbow and supply and fix 32mm dia cast malleable GI medium grade three way elbow to GI Charpoy as required, all as specified and directed by Engr-in-charge.
Removing the existing damaged/broken GI check nuts and supply and fix 6mm thick GI medium grade check nuts suitable for 32mm dia GI pipe of GI Charpoy, all as specified and directed by Engr-in-charge.
Repairs to Table Writing (FD-280/275) (a) Repair/replacement the following components of table writing after removal of old unserviciable component of seasoned teak wood duly polished as directed by Engr-in-charge including removing the unserviceable leg from table and supply and fix of new leg of table writing of seasoned teakwood as shown on drg and as directed by Engineer-in-Charge.
(b) Removing the unserviceable long rail from table and supply and fix new top short rail of seasoned teak wood duly polished glossy finish as shown on drg and as directed by Engineer-in-Charge.
(c) Removing the unserviceable short rail from table and supply and fix new top short rail of seasoned teak wood duly polished glossy finish as shown on drg and as directed by Engineer-in-Charge.
(d) Removing the unserviceable stiffner from table and supply and fix of new stiffner of seasoned teak wood duly polished glossy finish as shown on drg and as directed by Engineer-in-Charge.
(e) Removing the unserviceable top from table and tightining of frame and supply and fix of new top of Table writing with 18mm thick pre laminated partical board ISI Marked, Edge should covered with 6mm thick teak wood beading duly polished, as shown on drg and as directed by Engineer-in-Charge. Make of prelaminated Particle Board: Anchorlam/Novapan/Ecobaord Industries/Kitply/Greenply/ Bhutan Bd as approved by GE
(f) Removing the unserviceable drawer from table and replacement of drawer of table writing made to shape and size, front/Back and both side of the drawer shall be 18mm thick seasoned 2nd class hard wood (teak) duly fitted with 1 Nos knob as per drg and as directed by Engr-in-Charge.
(g) Removing the unserviceable Prelaminated particle board /ply from table and supply and fix of pre laminated particle board 18mm thick in front both side of table writing and 4mm teak BWR play wood duly ISI Marked fitted to rear side of the table wiriting duly polished as directed by Engr-in-Charge. Make of plywood: Kitply/Greenply/Century Ply/Anchor/Archid Ply/ Bhutan bd/Indian Plywood as approved by GE Make of prelaminated Particle Board: Anchorlam/Novapan/Ecobaord Industries/Kitply/Greenply/ Bhutan Bd as approved by GE
(h) Removing the unserviceable shutter from table and replacement of new shutter of table writing to be made of 18mm thick preleaminated particle board ISI Marked, Edges should be covered with 4mm thich teak wood beading, fixed with 18" long piano type hinges and one knob to be provided as shown on drg and as directed by Engineer-in-Charge. Make of prelaminated Particle Board: Anchorlam/Novapan/Ecobaord Industries/Kitply/Greenply/ Bhutan Bd as approved by GE
Repairs to Bed Hard (Steel) without MNF(FD/E6/MAP/08( R) :- Removing Dents and Bends and welding wherever required for Bed Hard(Steel) :- Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of bed surfaces after applying putty and red oxide primer and spray painting of bed hard with two coats of synthetic enamel paint, Colour Black and as directed by Engg-in-Charge . Make for paint:- Asian paints/ Nerolac Paints/ Dulux Paints/ Shalimar paints/ Berger Paints as approved by GE Note :- Bed Hard(Steel) as a whole shall be measured as single unit.
a) Removing existing unserviceable plywood and supply and fix of 12 mm thick commercial plywood BWR grade and with ISI mark conforming to IS 303 specification for Bed Hard(Steel) of size as per drawing and as directed by Engg-in-Charge. Make of plywood: Kitply/Greenply/Century Ply/Anchor/Archid Ply/ Bhutan bd/Indian Plywood as approved by GE
Repairs to Charpoy IP Hard Top of 12mm Ply (FD-MAP-II/01) :- Removing Dents and Bends and welding wherever required for Charpoy Hard(Steel) :- Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of bed surfaces after applying putty and red oxide primer and spray painting of Charpoy hard with two coats of synthetic enamel paint, Colour Black as shown on drg and as directed by Engineer-in-Charge. Make for paint:- Asian paints/ Nerolac Paints/ Dulux Paints/ Shalimar paints/ Berger Paints as approved by GE Note :-Charpoy IP Hard Top of 12mm Ply as a whole shall be measured as single unit.
a) Removing existing unserviceable plywood and supply and fix of 12 mm thick commercial plywood BWR grade and with ISI mark conforming to IS 303 specification for Charpoy IP Hard Top of 12mm Ply of size as per drawing and as directed by Engg-in-Charge. Make of plywood: Kitply/Greenply/Century Ply/Anchor/Archid Ply/ Bhutan bd/Indian Plywood as approved by GE
Repairs to Chair CB steel with Arms (FD 75(M)) a) Removing the existing unsv seat from chair and supply and fix new seat frame out of seasoned, first class hard wood teak, providing caning holes at 12.5 mm centre to centre, as shown on drawing duly painted green with synthetic enamel paint first quality, and canning/ weaving with not less than 1.8mm width plastic cane and 3mm width cane for border. Seat shall be fixed to frame with suitable bolts & nuts as per drg and as directed by Engr-in-charge. Note:- (i) Each seat shall be measured as one unit. (ii) The unit rate quoted shall be deemed to include for canning. Make for paint:- Asian paints/ Nerolac Paints/ Dulux Paints/ Shalimar paints/ Berger Paints as approved by GE Make for cane :- Godrej/Maharastra plastic or equivalent as approved by GE
a) Description all as per Sl Item No. 73 above but back frame of chair as shown on drg and as directed by Engineer-in-Charge.
b) Removing existing unserciceable teak wood arm from the chair and supply and fix new first class teak wood Arms made to shape and size as shown on drawing, duly polished, glossy finish etc complete all as shown on drg and as directed by Engineer-in-Charge. Note :- Each arm shall be measured as one unit.
Repairs to Chair CB steel without Arms (FD-75(M)) Removing the existing unserviceable seat from chair and supply and fix new seat frame made out of seasoned first class hard wood teak, polished with french polish, glossy finish and canning/ weaving with not less than 1.8mm width plastic cane and 3mm width for bordering . Providing Caning holes at 12.5 mm centre to centre. The seat frame shall be fixed with suitable bolts & nuts etc complete all as shown on drg and as directed by Engineer-in-Charge. Note:- (i) Each seat shall be measured as one unit. (ii) The unit rate quoted shall deemed to including for canning. Make for polish :- Sheenlac/Tower/Naidu/Touchwood or equivalent make as approved by GE Make for cane :- Godrej/Maharastra plastic or equivalent as approved by GE
a) Description all as per Sl Item No.76 above but back frame of chair as shown on drg and as directed by Engineer-in-Charge.
Repairs to Almirah Large Steel :-FD-1031 :-Removing Dents and Bends and welding wherever required for Almirah Large Steel:- Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of almirah surfaces after applying putty and red oxide primer and spray painting of almirah with two coats of synthetic enamel paint, Colour Green, all as shown on drg and as directed by Engineer-in-Charge. Make for paint:- Asian paints/ Nerolac Paints/ Dulux Paints/ Shalimar paints/ Berger Paints as approved by GE Note :-Almirah as a whole shall be measured as single unit.
Repairs to Almirah Medium Steel :-FD-1032 :-Removing Dents and Bends and welding wherever required for Almirah Medium Steel:- Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of almirah surfaces after applying putty and red oxide primer and spray painting of almirah with two coats of synthetic enamel paint, Colour Green, all as shown on drg and as directed by Engineer-in-Charge. Make for paint:- Asian paints/ Nerolac Paints/ Dulux Paints/ Shalimar paints/ Berger Paints as approved by GE Note :-Almirah as a whole shall be measured as single unit.
a) Removing the existing unserviceable damaged shelf from almirah large steel andsupply and fix shelf made out of MS sheet, 1 mm thick, bent to shape as required, welding, etc including preparing the new steel and iron surfaces and applying, two coats of Synthetic enamel paint as specified in Sl No 01, over a coat of red oxide primer complete all as directed by Engg-in-charge Note:- Each shelf will be measured as one unit. Make for sheet :- Rinl /Sail / Tisco/Jindal as approved by GE Make for paint:- Asian paints/ Nerolac Paints/ Dulux Paints/ Shalimar paints/ Berger Paints as approved by GE
b) Description all as per Sl Item No 80 above but Almirah Medium Steel .Complete all as directed by Engg-in-Charge
c) Removing the unserviceable locks from Almirah and supply and fix new steel locks (6 lever brass) for Almirah large/Med steel of approved quality with duplicate keys all as directed by Engg-in-charge . Make of Lock :-Godrej/Sheel/Harrison/KICH/ RP Lock Company as approved by GE
d) Removing and replacing unserviceable handle with new 100 mm chromium plated handle of approved quality for Almirah large/Med steel all as directed by Engr-in-charge. Make of Lock :-Godrej/Sheel/Harrison/KICH/ RP Lock Company as approved by GE
Repairs to Book Case Steel:- FD-1028 Removing the steel shutters and refixing the same after repair of dents and bents including sliding arrangements for book case as shown on drg and as directed by Engineer-in-Charge. Note:- Each shutter shall be measured as one unit.
a) Removing and replacing the broken glass with 3mm thick new plain glass sheet shall be provided for shutter with proper packing to avoid loose fittings, including beading of first class hard wood teak, 6 mm thick, duly polished, glossy finish, for one shutter for book case steel all as shown on drg and as directed by Engineer-in-Charge. Make of Glass:- Modiguard / Saint Gobain / Modi float/ Hindustan Pilkington Glass Work/ Kohinoor/ Swastik as approved by GE
b) Removing and replacing unserviceable handle with new bow handle of 75mm size steel chromium plated with suitable screws all as directed for one shutter of book case steel, all as shown on drg and as directed by Engineer-in-Charge.
c) Removing the unserviceable locks and supply and fix new steel lock (6 lever brass) of approved quality with duplicate keys complete all as shown on drg and as directed by Engineer-in-Charge. Make of Lock :-Godrej/Sheel/Harrison/KICH/ RP Lock Company as approved by GE
Repairs to Table Office Officer/Clerk Steel (FD-1003/1004) Removing the unserviceable drawer from table and supply and fix new drawer made out of 1mm thick MS sheet made to shape, welding etc, including preparing the new steel and iron surfaces and applying, two coats of synthetic enamel paint (OG), first quality, over a coat of red oxide primer all as per drg and as directed by Engr-in-Charge. Note:- Each drawer will be measured as one unit. Make for sheet :- Sail /Rinl/Tisco as approved by GE Make for paint:- Asian paints/ Nerolac Paints/ Dulux Paints/ Shalimar paints/ Berger Paints as approved by GE
a) Removing the unserviceable locks and supply and fix new steel lock (6 lever brass) of approved quality with duplicate keys all as directed by Engr-in-charge for table office officer/table office clerk steel, all as shown on drg and as directed by Engineer-in-Charge. Make of Lock :-Godrej/Sheel/Harrison/KICH/ RP Lock Company as approved by GE
b) Removing the existing unsv table tops of table office clerk steel and supply and fix new table top with 18mm thick pre-laminated particle board, with one face decorative laminate and other balancing white, exterior grade, ISI Marked, duly fixed with 20 /19mmx 4mm thick teak wood, half round beading, duly polished, glossy finish, all round, etc complete, all as directed all as directed. Make of prelaminated Particle Board: Anchorlam/Novapan/Ecobaord Industries/Kitply/Greenply/ Bhutan Bd as approved by GE
c) Description all as per Sl Item No 90 above but for Table office officer steel as shown on drg and as directed by Engineer-in-Charge.
Repairs to Table Computer (FD/E6/MAP/03) Removing unserviceable/ worn out components of Table Top and supply and fix the required Top along with appropriate new screws 'L' clamps and new component with beading as per the existing, 18 mm thick pre-laminated particle board, exterior grade,both side lamination, (Shade as that of component removed) and all cut ends of laminated sheet to be sealed by laminated beading as directed by Engg-in-Charge. Make of prelaminated Particle Board: Anchorlam/Novapan/Ecobaord Industries/Kitply/Greenply/ Bhutan Bd as approved by GE
a) Description all as per Sl Item No. 92 above but sides of table.
b) Description all as per Sl Item No. 92 above but key board of table.
c) Description all as per Sl Item No. 92 above but bottom of table.
d) Description all as per Sl Item No. 92 above but drawer of table.
e) Removing unserviceable /worn out key board & drawer MS telescopic channel supply and fix new MS telescopic channel with appropriate screws and all as directed by Engg-in-Charge
f) Removing unserviceable /worn out lock from the drawer of table and supply and fix new brass lock to match the original all as directed by Engg-in-Charge
Removing the old existing paint and Preparing the old painted surfaces by sand paper and removing dents and bents and filling with putty (metal paste) painting with approved synthetic enamale paintsone coat glossy finish all as directed by Engr-in-charge for Almirah large with shelves steel FD-1031
Description all as per Sl Item No. 99 above but Almirah med with shelves steel FD-1032
Description all as per Sl Item No. 99 above but, Locker bed side steel FD-1029
Removing the old existing paint and Preparing the old painted surfaces by sand paper and removing dents and bents and filling with putty (metal paste) painting with approved synthetic enamale paints one coat glossy finish all as directed by Engr-in-charge for Side Rack 3 Spaces steel FD-1023
Removing the existing damaged/unserviceable pedestal assembly of chair executive revolving of sorts and providing and fixing new pedestal assembly wih 6 Nos twin wheel castors complete, all as specified and directed by Engr-in-charge
Removing the existing damaged/unserviceable pedestal assembly of computer chair of sorts and providing and fixing new pedestal assembly wih 5 Nos twin wheel castors complete, all as specified and directed by Engr-in-charge
Removing the existing damaged/unserviceable Gas lift of chair executive revolving of sorts and providing new gas lift and make good the centre pivot mechanism of revolving chairs including tilt tension adjustment complete, all as specified and directed by Engr-in-charge
Chair Varandah:- De-rusting of Chair Varandah using Emery paper and duly painted with two coats of approved synthetic enamel paint over a coat of red oxide prime as directed by Engr In charge. Make for paint:- Asian paints/ Nerolac Paints/ Dulux Paints/ Shalimar paints/ Berger Paints as approved by GE
Form with and without back :- (a) M&L for welding/Gas welding to broken parts of form with and without back whwrwewver required and smoothning the surfaces with emery paper and applying one or more coats of approved synthetic enamale paints over of coat of red oxide primer complete as shown on drg and as directed by Engineer-in-Charge. Make for paint:- Asian paints/ Nerolac Paints/ Dulux Paints/ Shalimar paints/ Berger Paints as approved by GE
Removing of unserviceable old defective mirror and back ply wood of mirror frame of Table Dressing Gents and providing new sheet glass copper electro plated mirror 5mm thick and new plywood commercial BWR grade 6mm thick Ply for back side to mirror frame and fixing to Table Dressing Gents at the location as directed by Engineer-in-Charge including french polishing to the structure of Table Dressing Gents and shown on drawing (FD-230) complete all as specified and as directed by Engr-in-Charge.
HAT STAND MIRROR (FD-233) supply and fix in repairs 5mm th bevelled edge looking mirror of size 440x300mm with wooden beading complete all as shown on drg and as directed by Engineer-in-Charge.
(a) Supply and fix in repairs new peg overall size 120x75mm with brass screw complete all as shown on drg and as directed by Engineer-in-Charge.
(b) Supply and fix in repairs of 1000x710x4mm th comercial plywood to back side of hat stand small complete all as shown on drg and as directed by Engineer-in-Charge.
(c) Supply and fix in repairs new wooden edging of size 35x6mm th all around the hat stand complete all as shown on drg and as directed by Engineer-in-Charge.
Removing of existing unserviceable Plastic Bushes from Chair Dining, Chair Writing, Chair Easy, Stool Dressing,Table Dining 8/6 Person,Table Bedside, Table Peg, Table Centre, Teapoy FD, Table 900x600, Table Writing and supply and fixing of New Plastic Shoe/Bushes at the location all as shown on drg and as directed by Engineer-in-Charge.
Toffy Construction
SHANMUGA TRADERS
SREE GOWRISHANKAR ENTERPRISES
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .