REPAIR RESURFACING OF ROAD AT CERTAIN PLACES INSIDE LAUNCH COMPLEXES I LAUNCH COMPLEXES II LAUNCH COMPLEXES III AT VARIOUS OPTRONICS TRACKING STATION OP 5000 OP 4000 AND CERTAIN PLACES OF TECHNICAL AREA SECURITY PERIMETER ROAD

Amount

M&L for repair to pot holes any depth, not exc 1 sq m each including sweeping, free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sqm, putting in pre-mixed bituminous macadam, well rammed and sealed with binder 9.8 kg/10 sqm and binded with 0.09 cu.m of stone chippings, 6.3 mm size and again well rammed by 8 to 10 tonne power roller (including supply of premixed macadam, binder and chippings), depth of potholes exc 30mm. complete all as specified and directed.

Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and all as specified directed by Engr-in-Charge.

M&L for applying evenly a priming / tack coat with bituminous primer at @ 5 Kg / 10 Sqm complete all as specified and directed.

M&L for applying evenly a priming / tack coat on bituminous macadam surface with bitumen primer @ 3 Kg / 10 Sqm complete all as specified and directed.

M&L for Premix bituminous macadam laid/rolled and compacted to a required gradient and camber using 4% paving bitumen (VG-30) by weight of mix shall be from hot mix plant and laid by machnical paver( consolidated thickness 75mm or less).

Providing and Laying and consolidating 40 mm thick Premix semidense asphaltic concrete with 5.5% binder content by weight of total mix from hot mix plant using paving bitumen (VG-30), rolled by 8 to 12 ton vibrating (Tondom) road roller to confirm uniform surface and compacted to required gradient and camber complete with mechanical paver, filler shall be added as per job mix design complete all as specified and directed.

M&L for thermoplastic road marking paint 2 mm thick (lines, dashes, arrows letters etc on wall pavements and the like) with road safety spikeries glass beads 8% including preparation of new or previously teated road surface by using special applicator machine with heating arrangements upto 160 degree centrigate complete all as specified

MS VIDYANJALI

M/S T.N.CONSTRUCTION

MS BEHERA SANITARY AND HARDWARE

Shree Mahavir Associates

DS ENTERPRISES

RPL SYNDICATE CO

jlenterprise