PROVISION OF CERTAIN REVENUE AND MINOR WORKS AT CGRA KUNJATHBAIL UNDER AGE (I) MANGALORE

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L 25mm thick cement concrete type B-O (using 12.50mm graded crushed stone aggregate) as in floors finished rough to receive floor finishes complete all as specified..

S&F non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exc 0.18sqm but n.exc 0.38sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified.

S&F Glazed ceramic tiles in vertical surface 7 to 8 mm thick (square/ rectangular), area of each tiles exc 0.18sqm but n.exc 0.38sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing plaster in cement mortar 1:4 complete all as specifed .

Demolition of Stone slabs and tiles laid bedded and pointed of any mortar of any description or thickness in floors, aprons etc.

Material and labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/slabs and like laid over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite half round on exposed projected surfaces all as specified and as directed.

M & L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations

Taking up or down 20mm dia steel tubing and connections setting aside serviceable pipe for reuse and removing unserviceable pipe from site complete all as specified & as directed.

Supplying and laying of 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth

S & F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S & F Push tap 15mm dia any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm- 75gms)

S & F PVC 75 mm dia (SWR) floor trap, plain with grating including jointing with solvent cement

S&F PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber rings, laid in floor or trenches.

S&F PVC (SWR) bends 75 mm dia

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each (without taking off shutters from the frames) complete all as specified & as directed.

S&F factory made PVC door frame of size 50 mm x 47 mmmade out of 5 mm thick plain colour, PVC sheet reinforced with MS square tube complete all as specified.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.

M & L for cement mortar 1:6 Forming jambs , etc to openings (to foregoing item) , including cutting , toothing and properly bonding into old work, also facing , jointing and pointing to match existing work, complete all as specified and as directed.

S&F 75 mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

M&L for 150mm size aluminium handle (ISI Marked) cast type anodized, fixed complete all as specified and directed.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 mixed with integral water proofing compound @ 3% by weight of cement and finish the surfaces even and smooth all as directed.Note:- WPC will be measured and paid separately

Supply only integral water proofing compound

M&L for preparing new plastered surfaces of walls or complete removal of existing finishes and applying two coats of oil emulson distemper over one coat of primer

Taking down and re-fixing of shutters in same opening but exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

S & F in repairs Pillar taps fancy type 15 mm bore cast copper alloy, with capstain heads, chromium platedscrewed down high pressure, with or without lettered "Hot" of "Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified.

S & F in repair Bib taps fancy type, Chromium plated for iron pipe and fixed 15 mm bore complete all as specified.

S&F in repair Stop valves cast copper alloy 15 mm dia, fancy type, chromium plated, screwed down, high pressure, with crutch handle screwed both ends for iron pipe or for unions.

Supply and fix in repairs stop valves cast copper alloy, screwed down high pressure with capastan head screwed both ends 15 mm bore fancy type chromium plated with long shank and cup suitable for concealed type Complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of lengths 450 mm, complete all as specified.

S&F in repair brass cromium plated shower rose 125mm with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge.

S &F in repair health faucet CP(hand shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with flexible polythene pipe of adequate length and with wall mounted pedestal for hanging faucet including taking down of old one and making good surfaces as directed.

S&F in repair Soap dish vitreous china coloured appx size 160 x 160x90mm recessed type fixed to plugs with CP brass screws.

S&F in repair vitreous china wash basin, white ,flat back ,size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and 32mm dia waste pipe.complete all as specified and as directed.

S&F looking mirror of size 600x450mm/Full length, 5mm thick bevelled edge mounted on 6mm thick plywood including fixing with screws and cup washers.

S&F PVC valveless, syphonic action type, flushing cistern 10ltrs capacity, low level, inlet ball valve, float valve, handle and fixing arrangement including 32 mm dia. PVC flushing pipe,complete all as specified.

S&F vitreous China wash down water closet pan (pedestal pattern), white , including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover, mild steel chromium plated hinging device complete but excluding flushing cistern including floor trap and making good damaged/disturbed surfaces complete all as specified and directed.

S&F in repair water closet (squatt pattern) vitreous china 'Orissa' pettern size 580 x 440 mm white with integral foot rests excluding flushing cistern but including PVC flush pipe & provision of lime concrete bedding, all as specified and as directed.

S&F in repairs plastic water closet seat of suitable size as per WC, black, closed pattern with flat bottom and cover and mild steel chromium plated hinges device.

S&F in repair Brass chromium plated bottle traps 32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&F in repair toilet paper holder of stainless steel of size 10.5 cm x9cm fixed to walls with chromium plated (CP) brass screws as directed by Engineer in charge and making good damaged surfaces.

S&F in repair brass chromium plated towel rail 20 mm dia, 'D' type 600mm long between flanges with brackets fixed to walls with brass screws and making good damaged surfacs.

S&F 12 mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes and including for holding stainless steel clamps as required complete all as specified and as directed.

S&F 5mm thick printed PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions, including 5mm thick PVC fillet, inclusive of Solvent Cement and fixing at site., complete as specified and where directed.

S&F factory made UPVC white colour Two track four panels sliding glazed door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto 10.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.l fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Supply & fixing factory made UPVC white colour Two track two panels sliding glazed door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension UPVC, extruded glazing beads, uPVC extruded interlock and UPVC extruded line sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I. fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, incl drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engr-in-Charge. (Glass or wiremesh shall be paid separately) Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S&F Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane with and including solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

Excavation in post holes in hard/dense soil each n exc 0.50cum getting out,returning in and ramming earth or broken rubble mixed with earth around in layer not exc 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface.

M & L Plain Cement Concrete Type B2 1:2:4 (using 40 mm graded stone aggregate) in post holes, including use and waste of form work.

M& L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments, with and including 20 mm thick cement screed in CM 1:4

M& L for plain cement concrete Type C2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass concrete.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, not otherwise described over 10cm width or girth after preparation complete.

S&F for 2 mm thick polycarbonate sheet of approved colour or texture as in roof covering/cladding to wall fixed with and including necessary aluminium flat/fittings as specified.

Supply and install hi wall split units (Non inverter) indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2.0 TR complete with all accessories required at site for smooth functioning of air conditioner complete all as specified and directed Make : Carrier, Blue star, LG, Voltas

Supply and install tower AC 2.0 TR capacity (Non Inverter) indoor/outdoor complete with cordless remote control unit complete including all required accessories to make functional the Air conditioner at site complete all as directed. Make Carrier, Blue star, Voltas, Daikin.

Supply and fix Voltage stabilizer (wall mounted type) for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA

S&F copper tubing of required size as directed by OEM for inter connections between outdoor/indoor units (To be measured if required more than the tube supplied by OEM) including installation as per requirement.

S & F wall stand suitable for out door split unit for ACs as per OEM specifications

Supply and fix Air Circulator fans 230 volts single phase oscillating type 600 mm (24") sweep, 180 w, 1440 RPM, air delivery 270Cum/Min with 3 blades suitable for wall mounting complete with all mounting accessories and making connections with existing point wiring complete all as directed. Make Almonard, Crompton, Usha

Material and labour for laying 3 Core 1.5 Sqmm PVC insulated and PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volts, through PVC Conduit of suitable size complete all as specified and as directed. Make : Plaza, polycab, Havells

Supply and fixing Thermoplastic polycarbonate Cable Junction Box IP 66/67/69 (Black) “weather proof”, for outdoor installation of size 155 x 210 x 92 mm suitable for 10-16 Sqmm cable duly fixed with MCB SP 6 A and connector busbar for cable entry and outgoing complete all as specified and as directed. Make:- Hensel or equivalent from Havells

Supply, lay, testing and commissioning 10 Sqmm 4 Core UG cable XLPE insulated, armored heavy duty electric cable, 1100 volts grade with stranded aluminium conductor in laid in wall/air with saddles including etc complete all as specified and as directed Make : Polycab, Plaza, Havells

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. all as specified and directed.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including cover plate and metal flush box as suitable module and including suitable size PVC rigid non metallic PVC conduit with all accessories concealed in walls and including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor complete all as specified and directed :-

One light point controlled by one, one way switch

One Fan / Exhaust point controlled by one, one way switch

Taking down existing UNSV aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including suitable size PVC rigid non metallic PVC conduit with all accessories concealed in walls complete all as specified and as directed. (NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC conduit and its accessories of suitable size shall be measured as one unit length).

S/F Switch Modular 6A one way, 1 module complete all as specified and directed.

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed.

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete.

S & F LED lights fitting 20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and as directed.

M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with 200 Amps rated bus bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs and MS Box from its position and make good the disturbed surface etc to match with the existing surface complete all as specified and as directed.

M&L for MCB SP 6-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.

M&L for MCB SPN 20 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.

Please Enable Macros to View BoQ information