REPAIRS OF TOILETS AND BATHROOM PLUMBING INCLUDING CLEANING OF SEPTIC TANKS AND SANITARY FITTINGS IN ZONE A AND B OF AGE BR DETT B OF GE 862 EWS

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non-skid coloured (light shade) ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick screed bed or bedding layer in CM 1:4 complete all as specfied and directed.

M&L for non-skid coloured (light shade) ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick screed bed or bedding layer in CM 1:4 complete all as specfied and directed.

M&L for coloured glazed ceramic tiles on vertical surface of size 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick cement plaster in CM 1:3 complete all as specfied and directed.

M&L for providing Mirror polished kota sotne slab flooring 18-20 mm thick over and including 20 mm thick screed bed in Cement morter1:3 and jointed with grey cement slurry mixed with pigment including cutting and mirror polishing including dismantling of old kota stone flooring of any type complete all as and directed.

M&L for Machine cut kota stone slab(mirror polished) flooring 18-20mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 10 mm thick in cement mortar 1:3 after dismantling of old unserviceable of skirting, complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor and paving not exc 15cm thickness below or above ground level complete all as specified and as directed.

Taking up or down 15mm bore GI tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore GI tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar 1:4 cutting not exceeding 10cm girth in brick walls, complete all as specified and directed.

Fixing only 15 bore GI tubing medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar 1:4 cutting not exceeding 10cm girth in brick walls, complete all as specified and directed.

S&F medium grade galvanised steel water tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing, complete all as specified and directed.

Fixing only 20mm bore GI water tubing medium grade galvanised steel tubingmedium grade galvanised steel tubing with all fittings fixed to wall or laid in floors, complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches/wall complete all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

S & F in repairs 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

M&L 18-20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms/ Urinal partition and like set in 20 mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc including taking down old slab complete all as specified and directed.

S&F in repair viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set of CP jet with PVC pipe, 'P' or 'S' trap of superior quality complete all as specified and directed.

S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed.

S&F in repairs vitreous china urinals,flat back of size 465mmX355mmX265mm,white, bowl type, complete including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed.

Supply and fixing in repairs viterous China water closet pedestal pattern in one piece type of dimention 73cmX36cm74cm including seat cover and gaset, floor mounted, 'P' or 'S' trap, flushing kit, CP jet with PVC pipe of superior quality and all necessary fixing arrangements complete all as specified and as directed.

Supply and fixing in repairs viterous China wash basin, white flat back, size 550x400mm excluding taps, waste chain and plug and porcelan stopper but including waste pipeand brackets, complete all as specified and directed.

S & F in repairs counter top wash basin oval shape and size 195x600x425, including waste pipe,CP basin mixer, waste chain and plug and porcelan stopper brackets complete all as specified and as directed.

Supply and fixing in repairs viterous China pedestal type wash basin, white flat back, excluding taps, waste chain and plug and porcelan stopper but including waste pipe and brackets, complete all as specified and directed.

Supply and fix in repairs of CP brass WHB mixers for hot and cold water mixing of 15mm dia screwed down for iron pipe complete all as specified and directed.

S & F in repair for 15 mm bore brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in repair 15mm bore brass cromium plated wall mixer with hand shower arrangement with connection legs wall flanges and wall bracket for hand shower, complete all as specified and directed.

S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples,including brass Ball valves suitable for 20 mm bore complete all as specified in SSR Part I including dismantling of existing tank and removing to store, complete all as specified and directed.

S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, including brass ball valves suitable for 20 mm bore complete all as specified in SSR Part I including dismantling of existing tank and removing to store, complete all as specified and directed.

S&F in repair 15mm CP brass health faucet (hand shower), inlet length 100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc, complete all as specified and directed.

S&F in repair copper alloy chromium plated jet spray suitable for padestal pattern WCs including decorative choice flexible pipe fixed to iron pipe with and including cover plate, complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated pillar tap, with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe, complete all as specified and directed.

S &F in repairs brass CP shower rose of size 125 mm with swivel joints fixing to steel pipes etc, complete all as specified and directed.

S&F repair in PVC waste pipe 600/900mm long suitable for Wash hand basins and urinals including connecting all as specified and as directed.

S & F in repair stainless steel soap dish holder complete as specified and directed.

S & F in repair Glass corner shelf with tempered glass,stainless steel brackets and polished chrome finish rail, complete all as specified and directed.

S&Fin repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges decorative type fixed with with & including screws and wooden/plastic cleats, complete all as specified and directed.

S&F in repairs concealed type fancy type Stop valves, 15 mm bore of pipe, cast copper alloy CP, screwed down, high pre-ssure, with long shank and cup, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair 15 mm dia bib tap cast copper alloy, chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs 15mm dia angle valve, cast copper alloy, fancy type,chromium plated suitable for iron pipe and one end and PVC connector on other, ISI marked, complete all as specified and directed.

S & F in repair for PVC connection pipe 15mm dia with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repairs gun metal globe or brass gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia, complete all as specified and directed.

S&F in repairs gun metal globe or brass gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia, complete all as specified and directed.

S&F in repair 75 mm pvc floor trap with CP grating suitable hole and fixed with white cement, complete all as specified and directed.

S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S & F in repairs bathroom cabinet of hard thermosetting plastic of size 600x450mm, fitted with superior quality distortion free 4mm thick mirror complete as specified and directed.

S & F in repairs Ball brass valves suitable for 15 mm bore iron pipe high pressure with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms) complete as specified and directed.

S & F in repairs Ball valves suitable for 20 mm bore iron pipe high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) complete as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each (w/o taking off shutters from the frames), complete all as specified and directed.

All as per item No 52 here-in-before, but exceeding 1.5 Sqm but n.exc 4 sqm each, complete all as specified and directed.

Taking down shutter of any description of area exceeding 1 sqm and n exc 2 sqm, complete all as specified and directed.

S&F pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, holdfast with and including concrete bed block, lock strike plates complete all as specified and directed.

All as per Item No 55 here-in-before, but frame size of 105x60mm, complete all as specified and directed.

S&F steel windows with side hung shutters box type including projecting type hinges with steel handle, and steel peg stay, hodfast with and including concrete bed block complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per Item No 57.00 here-in-before, but without glazing bars, complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges and handle with steel peg stay complete welded, complete all as specified and directed.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; side hung or barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed.

S&F factory made second class Hard wood 35 mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with commercial face veneers, complete all as specified and directed.

S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing, complete all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification, complete all as specified and directed.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium (extruded section body) desigtnation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg, complete all as specified and directed.

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n . Exc 0.50 sqm in each pane complete all as specified and as directed

S&F figured glass, pin head type, 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane including hacking out old broken glass complete all as specified and as directed.

S&F in repair GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F in GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wood and wood based surface incl preparation of surfaces, complete all as specified and directed.

M&L preparation of new of previously untreated steel or iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a one coat of red oxside primer, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nanital or similar pattern roof covering complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.

M&L for MS tubular pipes joist, channel, angle, tee section, fixed independently, without connecting plates etc (cut to ordinary length ie within 20mm of the length indicated) conforming to Fe 290 grade E-165 complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions complete all as specified and directed.

S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of old existing ceiling board etc, complete all as specified and directed.

S&F in repair fancy type SS curtain rod 20mm dia (of approved colour and design) , complete all as specified and directed.

S&F in repair curtain brackets with finials of fancy type (of approved colour and design) curtain rod powder coated 20mm dia including fixing to walls with MS full screws(including fixing of wooden pieces of required size of walls), complete all as specified and directed.

Demolition of brick work or stone / boulder or concrete block masonry including all quoins, arches, pillars, etc. built in cement mortar, complete all as specified and directed.

M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 with water proofing compound @ 3% by weight of cement , on brick work or concrete surfaces and finished the surfaces even and smooth without using extra cement ,complete all as specified and as directed. Note: Cost of WPC shall be included in rate of above item.

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces finished all as specified and directed.

M&L for preparation of old decorated brick/concrete plastered/un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc complete all as specified and directed

M&L for preparation of old decorated plastered surface of Ceiling etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy oil and greasy spots and applying one coat of lime white wash on ceiling complete all as specified and directed.

M&L for preparation of newly plastered surface of wall etc and applying three coats of lime white wash, complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of primer complete all as specified and directed.

M & L for applying one coat of distemper oil emulsion on old wall surfaces including preparation of surfaces all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of weather coat paint (Apex) over one coat of alkali resistand primer, complete all as specified and directed.

M&L for newly plastered surface of wall/roof including cornices and chajjas etc and applying two coats of exterior emulsion weather coat paint of Apex Ultima of ASIAN or equivelent make of two or more colours pattern over and including a coat of primer/putty, complete all as specified and directed.

M&L for complete removal of existing treatment of wall/roof surface including cornices and chajjas etc and applying two coats of exterior emulsion weather coat paint of Apex Ultima of ASIAN or equivelent make of two or more colours pattern over and including a coat of primer/putty, complete all as specified and directed.

M & L for 50 mm thick cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

M&L for water proofing treatment to sunken portion (floor and wall) of WCs, bathroom etc as below :- (a) Complete removal of existing filling and treatment over RCC slab and making a slope of 1:8 in and including PCC (1:2:4) with minimum thickness 30mm using 12.5mm graded stone aggregate and providing all wall and floor joints with coved fillet in PCC (1:2:4), having a radius of 70mm. (b) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (c) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (d) Sealing of joint of Trap/WC/Soil pipes with sealing compound of MC Bouchemie/Roofex/Forre/Choksy/Dr Beck & Coty/FOSROC

Complete removal of existing water proofing treatment over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing in low lying area where directed and providing following :- (a) Rendering 10mm thick in cm 1:3 on concrete roof surfaces and finish the surface even & smooth without using extra cement including mixing WPC @2% by weight of cement. (b) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried. (c) After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface. (d) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm. APP membrane shall laid acorss the slop from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat Note : (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed.

Demolition of reinforcement cement concrete as in roofs, beams, staircase, chajjas and similar suspended work, complete all as specified and directed.

M&L for Reinforcement cement concrete nominal mix type B1 1:2:4 ( 20 mm graded stone aggregate) in slab for cooking plate form, supported on wall, beam and column in floors, roofs, landing,balconies, canpopies, Chajjas etc, complete all as specified and directed.

M&L for mild steel TMT bars above 10 mm dia cut out length bent to shape including cranking, bending and binding with 0.9mm dia mild steel wire or securing with clip, complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slab, floor slab, landing and similar work: not exceeding 200 mm thick (Horizontial or sloping ), complete all as specified and directed.

Form work to edge of concrete flat,treads, breaks in floors, window cill opening in concrete wall and similar work exceeding 5 cm wide and n. exc 10 cm wide complete all as specified and directed.

M/s Anil Engineers & Builders (BID ID -3478909)