Loading
Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.4 L
Closing Date
30 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
ESTATE1
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Any Civil work other than track work.
28 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer may please note that offers received without requisite/mandatory documents as mentioned above, will be considered as invalid tender and for which contractor shall have no claim on Railway.
The tenderer shall visit the site of work and acquaint himself/themselves with the conditions of work viz. approach roads and accessibility, availability of materials, electric power, water for work and drinking purposes, site for labour camps, stores, godowns, extent of lead/lift in work, availability of skilled and unskilled labour etc. that may be encountered in the course of execution of work. In short, he/they should familiarize himself/themselves fully with the all the conditions of the work site & all the financial implications due to the above conditions is deemed to be understood and taken care of while bidding the offer.
Upgradation of kitchen wood work, repair of damaged doors & windows of staff quarters and officers flats, Doctor Lane etc. colony in the section of SSE/W/PG under ADEN/E-I.
NIT-04-E-26-27-WE~NR
NIT-04-E-26-27-WE
Open
Works - General
8 Months
Delhi, Delhi
₹0
₹2.4 L
30 Jun 2026
9 Jun 2026
16 Jun 2026
104 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 350 | 411.3 | 1,43,955 |
| 2 | Chlorpyriphos emulsifiable concentrate of 20% | Litre | 150 | 200.9 | 30,135 |
| 3 | Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. | Metre | 200 | 257.55 | 51,510 |
| 4 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from natural sources) | cum | 1 | 9,277.75 | 9,277.75 |
| 5 | cum | 1 | 10,719.3 | 10,719.3 | |
| 6 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 10 | 766.55 | 7,665.5 |
| 7 | Hot rolled deformed bars | Kg | 75 | 89.65 | 6,723.75 |
| 8 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 1 | 6,658.25 | 6,658.25 |
| 9 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 4 | 8,288.35 | 33,153.4 |
| 10 | Area of slab upto 0.50 sqm | Sqm | 40 | 4,679.35 | 1,87,174 |
| 11 | Area of slab over 0.50 sqm | Sqm | 150 | 4,425.35 | 6,63,802.5 |
| 12 | Fastener with threaded dia 10 mm | Each | 300 | 33.8 | 10,140 |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 800 | 1,063.45 | 8,50,760 |
| 14 | Second class teak wood | cum | 2 | 1,31,576.95 | 2,63,153.9 |
| 15 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | 48 | 1,897.1 | 91,060.8 |
| 16 | 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). | Sqm | 50 | 2,231.2 | 1,11,560 |
| 17 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading | Sqm | 20 | 1,521.6 | 30,432 |
| 18 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 40 | 2,015.75 | 80,630 |
| 19 | Overall width 35 mm | Metre | 320 | 282.95 | 90,544 |
| 20 | 100X58X1.90 mm | Each | 300 | 86.15 | 25,845 |
| 21 | 75x47x1.80 mm | Each | 125 | 64.2 | 8,025 |
| 22 | Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. | Each | 25 | 1,004.8 | 25,120 |
| 23 | 50 mm | Each | 35 | 306.4 | 10,724 |
| 24 | 125 mm | Each | 500 | 226.5 | 1,13,250 |
| 25 | 200x10 mm | Each | 175 | 90.8 | 15,890 |
| 26 | 150x10 mm | Each | 300 | 75.55 | 22,665 |
| 27 | 125 mm | Each | 350 | 60.05 | 21,017.5 |
| 28 | Twin rubber stopper | Each | 25 | 62.25 | 1,556.25 |
| 29 | Double strip (horizontal type) | Each | 400 | 34.15 | 13,660 |
| 30 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) | Each | 40 | 17.65 | 706 |
| 31 | 1.0 mm thick | Sqm | 3500 | 764 | 26,74,000 |
| 32 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge | Sqm | 200 | 1,982.7 | 3,96,540 |
| 33 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. | Each | 1000 | 226.75 | 2,26,750 |
| 34 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. | Set | 300 | 749.7 | 2,24,910 |
| 35 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) | Kg | 350 | 423.7 | 1,48,295 |
| 36 | Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in- charge. | Metre | 2500 | 38.45 | 96,125 |
| 37 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 300 | 111.95 | 33,585 |
| 38 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 500 | 142.3 | 71,150 |
| 39 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | Sqm | 100 | 1,142.8 | 1,14,280 |
| 40 | Size of Tile 600 x 600 mm | Sqm | 500 | 1,286.6 | 6,43,300 |
| 41 | 110 mm diameter | Metre | 100 | 319.75 | 31,975 |
| 42 | 110 mm | Each | 30 | 119.95 | 3,598.5 |
| 43 | 110 mm bend | Each | 30 | 132 | 3,960 |
| 44 | 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified | Sqm | 25 | 1,179.25 | 29,481.25 |
| 45 | 2 mm thick flat | Sqm | 10 | 1,048.5 | 10,485 |
| 46 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 130 | 671.55 | 87,301.5 |
| 47 | 1:6 (1 cement: 6 fine sand) | Sqm | 150 | 282 | 42,300 |
| 48 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 1000 | 214.3 | 2,14,300 |
| 49 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Sqm | 370 | 191.4 | 70,818 |
| 50 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 2000 | 123.85 | 2,47,700 |
| 51 | Two coats | Sqm | 2500 | 90.05 | 2,25,125 |
| 52 | Two coats | Sqm | 1000 | 116.05 | 1,16,050 |
| 53 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | Sqm | 2500 | 64.45 | 1,61,125 |
| 54 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm | 2000 | 20.85 | 41,700 |
| 55 | One or more coats on old work | Sqm | 550 | 86.55 | 47,602.5 |
| 56 | With cement mortar 1:4 (1 cement : 4 fine sand) | Sqm | 100 | 462.3 | 46,230 |
| 57 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. | Sqm | 150 | 540.35 | 81,052.5 |
| 58 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. | Each | 5 | 243.1 | 1,215.5 |
| 59 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 8 | 2,928.1 | 23,424.8 |
| 60 | In cement mortar | cum | 5 | 1,698.45 | 8,492.25 |
| 61 | Of area 3 sq. metres and below | Each | 125 | 302.7 | 37,837.5 |
| 62 | Of area 3 sq. metres and below | Each | 60 | 118.3 | 7,098 |
| 63 | For thickness of tiles 10 mm to 25 mm | Sqm | 1500 | 60.5 | 90,750 |
| 64 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm | 60 | 219.75 | 13,185 |
| 65 | Thickness above 10 mm up to 25 mm | Sqm | 150 | 64.15 | 9,622.5 |
| 66 | 100 mm dia pipe | Metre | 10.05 | 64.3 | 646.22 |
| 67 | 15 mm to 40 mm nominal bore | Metre | 200 | 124.1 | 24,820 |
| 68 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. | Each | 15 | 744.6 | 11,169 |
| 69 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 400 | 45.05 | 18,020 |
| 70 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in- charge. | Sqm | 120 | 46.5 | 5,580 |
| 71 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 15 | 5,781.35 | 86,720.25 |
| 72 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 5 | 5,540.55 | 27,702.75 |
| 73 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 20 | 1,679.6 | 33,592 |
| 74 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer | Each | 30 | 3,459.05 | 1,03,771.5 |
| 75 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 30 | 1,500.05 | 45,001.5 |
| 76 | 510x1040 mm bowl depth 250 mm | Each | 6 | 6,008.45 | 36,050.7 |
| 77 | 610x510 mm bowl depth 200 mm | Each | 10 | 4,274.4 | 42,744 |
| 78 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia | Each | 10 | 6,119.15 | 61,191.5 |
| 79 | 32 mm dia | Each | 40 | 90.95 | 3,638 |
| 80 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 35 | 1,411.15 | 49,390.25 |
| 81 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | Each | 25 | 942.15 | 23,553.75 |
| 82 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. | Each | 4 | 16,100.4 | 64,401.6 |
| 83 | 15 mm dia nominal bore | Metre | 400 | 485.2 | 1,94,080 |
| 84 | 40 mm dia nominal bore | Metre | 17 | 558.35 | 9,491.95 |
| 85 | 25 mm nominal bore | Each | 2 | 532.35 | 1,064.7 |
| 86 | 40 mm nominal bore | Each | 2 | 707.3 | 1,414.6 |
| 87 | 15 mm nominal bore | Each | 30 | 348.85 | 10,465.5 |
| 88 | 15 mm nominal bore | Each | 100 | 85.2 | 8,520 |
| 89 | 150 mm diameter | Each | 20 | 190.1 | 3,802 |
| 90 | 15 mm nominal bore | Each | 50 | 262.3 | 13,115 |
| 91 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 2000 | 9.7 | 19,400 |
| 92 | 15 mm nominal bore | Each | 40 | 708.4 | 28,336 |
| 93 | 15 mm nominal bore | Each | 20 | 594.75 | 11,895 |
| 94 | 15mm nominal bore | Each | 20 | 500.35 | 10,007 |
| 95 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge. | Each | 75 | 61.7 | 4,627.5 |
| 96 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 750 | 466.3 | 3,49,725 |
| 97 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 150 | 564.8 | 84,720 |
| 98 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 50 | 1,019.8 | 50,990 |
| 99 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | Sqm | 20 | 1,325.55 | 26,511 |
| 100 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). | Kg | 50 | 560.85 | 28,042.5 |
| 101 | Cement Fiber Board 8 mm thick as per IS 14862:2000 of type B (High pressure Steam Cured) | Sqm | 30 | 2,170.4 | 65,112 |
| 102 | Frame size 65 x 100 mm | Metre | 80 | 1,000.15 | 80,012 |
| 103 | 30 mm thick | Sqm | 50 | 3,954 | 1,97,700 |
| 104 | 18 mm thick | Sqm | 10 | 2,714.15 | 27,141.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .