RequiredExperience with Government
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate Bid to RA enabled No Magnetic Stirrers ( 10 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) CONFIGURATION AND FEATURES Number of stirring Positions 1 1 Calibration Manual Calibration Manual Calibration Type of Drive Motor Brushless Motor DC Brushless Motor DC Display Option/Output Read out Option Digital Digital 1/5 Magnetic stirrer is: with a hot plate or some other means for heating the liquid with a hot plate or some other means for heating the liquid Timer Setting (Increment step) (sec) - * Minimum Speed Possible (RPM) 10 * Mangnetic stirrer Type variable speed variable speed Controler type Electronicaly controlled Electronicaly controlled IP rating or Ingress protection rating 65 65.0 - 68.0 Or higher Programmable No No Direction change feature No * Speed Control Accuracy of set speed (+/-) (RPM) 4 0.0 - 4.0 Or lower Maximum Stirring capacity per position 2000 2000.0 Top plate Material Stainless steel Stainless steel Timer Provided No * Base material Mild Steel * User Interface Analog Front Panel Analog Front Panel Pulse mode No * Type of Data Logging Option NOT AVAILABLE * Slip Detection No * Last run memory No No Accessories and spares included in standard pack - * CERTIFICATIONS Firm Certified to ISO9001:2008 or latest YES * Product is CE certified (Seller to furnish supporting document to Buyer on demand) Yes Yes EN/IEC directives - * Name and Address of the Lab - * Availability Of Test Report (to be furnished by Seller to Buyer on No * 2/5 demand) from Central Govt/NABL/ILAC accredited laboratory to prove conformity to specifications Test Report details; Number
Requireddate of issue
Requiredname and address of issuing laboratory - * WARRANTY Warranty on Machine 3 3
Required5 Or higher MISC In built-in multi-step safety system to continuously monitor device operation and protect against damage should the operation exceed the pre-determined parameters: Unsafe Hotplate Temperature – Temperatures exceed safety Parameters
RequiredProbe Failure – Probe Break Or Become Disconnected
RequiredVessel Breakage – Should The Vessel Have A Crack And The Solution Begins To Leak
Requiredprovision for preventing liquid from damaging equipment Unsafe Hotplate Temperature – Temperatures exceed safety Parameters
RequiredProbe Failure – Probe Break Or Become Disconnected
RequiredVessel Breakage – Should The Vessel Have A Crack And The Solution Begins To Leak
Requiredprovision for preventing liquid from damaging equipment Weigh 4 * Ambient operating Temperature range 0 to 50 degree Yes * Permissible Relative Humidity (%) 55 * POWER SUPPLY Input Voltage with Phase (V) 220 V
Required50 Hz AC
Requiredsingle phase * Input Current (A) 1 * Power Consumption ( 150 * SPEED Speed Mode Variable Speed Variable Speed Speed (RPM) 1200 * Minimum Speed increment step (RPM) 10 * Maximum Speed (RPM) of variable speed mode equipment 1200 * DIMENSIONS External Dimension: Height ) 185 * External Dimension: Width 200 * External Dimension: Depth 225 225.0 3/5 Body Material Mild Steel Mild Steel Finish of Body material Powder coated * STIR BAR Stir bar cover material PTFE * Stir Bar length 25 * TOP PLATE Top plate area shape Rectangular * Length of rectangular top plate area 225 * Width of rectangular top plate area 200 * Circular Top plate diameter 0 * Top plate Finish Ceramic coated Ceramic coated * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.