93_PVVNL_WORK REGARDING EMRGENCY WORK

Amount

Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends maximum distance up to 40 Km. :–

A) PCC Pole 8.5 mrt long/ST pole 11 mtr long.

Cartage of line material from store centre to dump site & then dump site to site of work on day to day basis, including loading & unloading at both ends maximum distance up to 20 Km. (15 Qtl.)

Cartage of 10 KVA to 100 KVA Transformer from store centre to site of work including loading & unloading at both site

Cartage of following material from JE Store to site of work including loading & unloading at both ends maximum distance up to 40 Km. :– A) PCC Pole 8.5 mrt long/ST pole 11 mtr long.

Dissmentling of Damaged & Broken P.C.C./ S.T.Pole/R.S. Joist by digging the pits & removel of complete H.T./L.T. line accessories .

Eartingh of each 11 KV line pople & T/F properly after drive of electrodes if size 20mmx250mm and connection the earthing point with GL wire.

Erection of PCC pole 8.5 mtr long/STP Pole 11 mrt long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil including back filling of the pole with proper ramming after completion of work.

Fabrication and fixing of all 11 KV H.T/L.T. line accessories.

Erection of Double pole on PCC pole 8.5 mtr after digging of pit of required size including fabrication and fixing of Top channel, droper channel & base channel alongwith, fixing all 11 KV accessories TPMO, Fuse set 11 KV pin insulators and making connection properly.

Mounting of 10 to 100 KVA T/F with proper jumping of HT side and fixing of cable on LT. side of T/F making connection properly.

Making a section pole to exist pole after fabrication & fixing of T channel fixing of all 11 KV accessories.

Erection of stay rod complete after digging a pit of size 1.20 x 0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming.

Laying lifting stringing of proper sagging of ACSR weasel conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly.

Laying lifting stringing of proper sagging of ACSR Rabbit conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly.

Laying lifting & sagging of LT line with A.B.C Bunch Conductor including proper binding & jumpring:- a) 3 phase 4 wire line.

Grouting of PCC/ST poles with Dust, Cement & Stone blast concreting.

Cutting & chopping tree branches near side of line for making the clearance between line and tree (near about 100 branches).

Fixing of LT distribution box along with providing clamp Nut & Bolts

Providing and fixing stay clamps .

Providing and fixing F Clamp

Providing and fixing Holding Clamp

Providing and fixing LT clamps .

Providing and fixing LT Insulator clamps .

Providing and fixing Bolt and Nuts .

J. K. ENTERPRISES