C/O Govt. Pooled residential accommodation for general administration department at Shimla C/O Type-I Qtr. 10No at Ellerslie Estate Chotta Shimla (SH-C/O civil work,WS and SI works and site development etc).

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in all heights and depths in all kinds of soil including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiesling and wedging out of rock (where blasting is prohibited and their intermediate classifications soils including dewatering where ever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-charge at site, according to the HP.PWD specification of 1990(One thousand nine hundred ninty) Volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site including prescribed dumping charges (to be arranged by the contractor) to the satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour machineries, tools equipments and safety measures and incidentals necessary to complete the work wise mechanical means and labour (if required) all useful material such as stones,shingles aggregate and slates shall be properly stacked at site to the meximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges:- :- All kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral-staircases complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and break in floors and walls :-Under 20cm wide complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Centering and shuttering including strutting, propping etc. and removal of form for : Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 Cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) Foundation, footing, bases of columns and the like and mass concrete.

Providing and laying reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and laying reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and laying reinforced cement concrete work in beams, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- Mild steel and Medium Tensile steel bars.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Backfilling behind retaining wall/breast wall complete as per drawing and technical specification clause 1204.3.8 in granular material complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing 110mm diameter poly Vinyl chloride pipe Weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etc., extending through the full width of the structure with slope of 1 (V):20 (H) (one vertical is to twenty horizontal ) towards drainage face complete as per drawings and MORD technical specifications clause 614,709,1204 complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and laying Stone Soling 90 mm to 45 mm size stone aggregate properly hand packed filling interstices with spalls and consolidating including spreading water complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class Deodar wood complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing 19mm (Nineteen milimetre) thick commercial board in box and shelves for cup board etc. including Nickel plated bright finished piano hinges complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing 19mm thick Commercial Board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing commercial ply wood of approved quality with butt jointing and nails. 6 mm thick in back of cup board complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing MS sliding door bolts complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 300 X 16 mm size

Providing and fixing MS sliding door bolts complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:-250 X 16 mm size.

Providing and fixing MS tower bolts (Barrel type) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 200 X 10 mm size

Providing and fixing MS tower bolts (Barrel type) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:-150 X 10 mm size.

Providing and fixing aluminium handles anodized complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:-125 mm size

Providing and fixing aluminium handles anodized complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:-75 mm size.

Providing and fixing oxidized single acting Door spring with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 150mm.

Providing and fixing oxidized M.S. hasps and stapple for cup board 90 mm size complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing 150mm (one hundred fifty milimetre) oxidized M.S. hooks and eyes complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing Hard wood plain squre edged cover fillets beeding 19mm x 6mm section including mitring at junction with wooden screws and nails etc. complete including carriage of materials in all leads and lifts.

Providing and fixing 1.00 mm thick lamination sheet of approved shade and quality fixed with approved adhesive and nails complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge of size 600mmx600mm.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge of size 600mm x 600mm.

Providing and laying rectified Glazed Ceramic floor tiles of size 300mm x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and laying matt finished vitrified tile of size 300mm x300mm x 9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and laying ceremic tiles 300mm x 450mm Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing prepainted galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.60 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing prepainted galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge : Ridges plain (500 - 600mm)

Providing and fixing prepainted galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge : Crimp curve

Providing and fixing prepainted galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge :Gutter (600 mm over all girth)

Providing and fixing 2.00mm thick M.S.B.P. sheet in eaves board / ornamental facia / soffit & ceilings including cutting, welding and applying a coat of red lead primer etc.complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. PVC Plain bend 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. PVC Plain Shoe 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. PVC Door Bend 110 mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).6 mm thick Cement fiber board as per IS: 14862 complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing angle iron window frames (Double rebate) manufactured from M.S. angle section of 25x25x3mm(Twenty Five into Twenty Five into Three milimetres) and M.S. flat 125x5( One hundred twenty five into five milimetres), and M.S. Hollow section for rebate 50mm x 25mm x 2.5mm complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing steel glazed doors, windows or ventilators of standard steel channels frame section 75X40mm with M.S. flat 75x4mm in combination welded together and standard section F-7B style of standard size with sash bars of T section 25x25x3mm and angle iron 25x3mm and joints metered and welded with 16x3.15mm lugs 10 cm. long embedded in cement concrete blocks 15cm x10cmx10cm size of 1:3:6 (1cement :3sand : 6graded stone aggregate 20mm nominal size) or with wooden plug and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings including providing and fixing of glass panes 4 mm in glazed and wire gauge of designation 85 with 0.56mm dia in wire gauge pannel with glazing clips and special metal sesh putty of approved make complete and applying a coat of approved steel primer after pretreatment of the surface complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

6mm (Six milimetre) cement plaster to ceiling in cement mortar 1:3 (One Cement is to Three Sand) in all floor level. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

15mm (Fifteen milimetres) thick cement plasters in single coat on rough side of brick /concrete/ stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

White washing with lime on ceiling and/or sloping roofs and undecorated wall surfaces in all floors two coats to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar dust and other foreign mattercomplete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm) and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and applying white cement based putty of average thickness 1.00 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc.complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. 1216 (16 mm O.D. pipe)

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc.complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.1620 (20 mm OD pipe)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge :(-500 litres net capacity tank)

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) :complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 15 mm nominal bore

Providing and fixing on wall face unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. (i) Single socketed pipes:- 75 mm diameter.

Providing and fixing on wall face unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. (i) Single socketed pipes:- 110mm diameter.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 75mm.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 110mm.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 75mm nominal size.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 110mm nominal size.

Providing and fixing PVC (finolex) plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 75 mm nominal size.

Providing and fixing PVC (finolex) plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 110mm nominal size.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 75 mm nominal size.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 110mm nominal size.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 75 mm nominal size.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 110mm nominal size.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge :- 75mm nominal size.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge :- 110mm nominal size.

Providing and fixing PVC Cowl complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 75mm nominal size.

Providing and fixing PVC Cowl complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 110mm nominal size.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 110 mm X 75 mm.

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) seat and cover to be measured and paid for separatelycomplete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- European type/ wash down type water closet pan.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. 10 litre capacity - White

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:- Flat back :-550mm X 400 mm.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge :- Kitchen sink with drain board 510x1040 mm bowl depth 250mm.

Providing and fixing C.P. Waste Coupling for wash basin and sink, of approved quality and colour complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms.

Providing & fixing 32 mm dia, PVC waste pipe for wash basin or sink including check nut complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing & fixing 100 mm dia, C.P. grating complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing Acrylic shelf with C.P. brass bracket and guard rail complete, fixed to wooden plugs with C.P. brass screws complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 15mm dia.

Providing and fixing CP brass pillar tap with capstan head complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 15mm dia.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 15mm dia

Providing and fixing uplasticised PVC connection pipe with brass unions complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 45 cm length,15mm nominal bore.

Providing and fixing brass full way valve with wheel complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 15mm nominal bore.

Providing and fixing brass full way valve with wheel complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 20mm nominal bore.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :(i) Single socketed pipes.:- 150mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 150 mm nominal bore.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

FURKAN AHEMED

Sanjeev thakur

MANTU KUMAR GUPTA