Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.3 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹14.1 L+₹15,579.24 (1.12%)Rejected-Finance SAI VILLA C 65 EKTA NAGAR BAREILLY 243122 U P C 09 HQ CESC PUNE | BAREILLY | UTTAR PRADESH | 243122 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹14.2 L+₹18,033.94 (1.29%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹14.3 L+₹36,079.69 (2.58%)Rejected-Finance BUNGLOW 19 THE MALL KAMPTEE CANTT | KAMPTEE CANTT | NAGPUR | MAHARASHTRA | 441001 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹14.7 L+₹76,468.04 (5.47%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹20.4 L
EMD Value
₹40,740
Closing Date
18 Jun 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Military Engineer Services, Garrison Engineer, Kamptee 441001
REPAIR/MAINT OF EM AND B/R WORKS OF VARIOUS E/M INSTALLATIONS IN KAMPTEE AND FORT AREA NAGPUR UNDER GE KAMPTEE
2025_MES_709258_1
8789/E8
Open Tender
Civil Works
Works
180 days
Kamptee
All as per NIT
8 documents required · 8 mandatory
₹500
GE Kamptee
₹40,740
Yes
1 Aug 2025
20 May 2025
20 Jun 2025
20 May 2025
18 Jun 2025
3 Jun 2025
Amount
Demolition of cement concrete (un-reinforced) in ground floors & pavings n.exc 15cm thick (below or above ground level) complete all as specified and directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and as directed.
M&L for Plain Cement concrete in sub bases/ pavings type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed.
M&L for Hardcore of gauge n exc. 63 mm broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed .
M & L for crushed sand/stone filling under floorings/pavement spread and levelled in layers n.exc 15cm thick complete including watering and consolidation complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with Grey cement and pigment complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade with Grey cement and pigment complete all as specified and as directed.
M&L for chequered cement concrete tiles colour glossy finished rubber pressed 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry and pointed in coloured pigment over 20mm cement screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for cement concrete tybe B-1, 1:2:4 (20mm graded aggregate) in floor finishes, concrete surface even and smooth without using extra cement complete all as specified and as directed.
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door/ frame etc complete all as specified and as directed.
M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'B' complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil, complete all as specified and as directed.
S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S& F Framed work as in doors or gates of angle/tubular or other section with gusset plates, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) hanging; also fastening and fixing conforming to Fe 410 -W(Gde-E- 250)quality A complete all as specified and directed.
M&L for providing and fixing stainless steel (Grade 304) railing/blusters/chain etc made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
Dismantling fencing wire mesh, any type complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.
Supply only Chain link MS galvanised fencing, any size or type complete all as specified and as directed.
S&F MS screw bolts of dia 5-10 mm ( machine made) with hexagonal or square at one end and screwed with other end or screwed both ends length of bolt n exc 5cm long complete all as directed.
S&F 10 mm dia and over round bars in chain link fencing complete all as directed by engineer in charge.
M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site of work complete all as directed.
M&L for Machine cut Kota stone slab flooring 18-25 mm thick over cement screed base 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishing complete, all as specified and directed.
S&F pre-polished granite 20mm thick fixed on platform/shelves floor/dado over 20mm thick screed bed in cement mortar 1:6 including necessary moulding etc complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposal of rubbish outside of MD land complete all as specified and directed .
M&L for brick work with fly ash bricks old size , straight or curved on plan exc 6 m mean radius , built in cement mortar 1:6 complete all as specified.
All as per Srl Item No 26 above but for half brick wall built in Cement Mortar 1:4 complete all as specified and directed .
M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparing new plastered surfaces and applying three coats White wash all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc) sheet in roof covering complete all as specified and directed.
S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and directed.
S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and directed.
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M&L for Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,and applying two coats of aluminium paint over and including one coat of aluminium primer complete all as specified and directed.
NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 69916.50]
NORTH INDIA PEST CONTROL (BID ID -3319836)
M/s B S Jain (BID ID -3319318)
M/s T.S.JOHAR (BID ID -3316687)
DEESHA CONSTRUCTIONS (BID ID -3320191)
chronicle enterprises (BID ID -3326961)
M/s DS Khekde (BID ID -3319903)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .