Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
13 Dec 2022, 6:00 pmClosed
Executive Engineer-Elec.
UIT, UDAIPUR
Providing and Fixing Phase Wire and LED Light at Various Places of UIT Area.(ARC). 6909
2022_UITUD_308695_6
NIT_69
Open Tender
Civil Works
Percentage
365 days
UDAIPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Refer Tender Documents
₹78,000
Yes
14 Dec 2022
5 Dec 2022
14 Dec 2022
5 Dec 2022
13 Dec 2022
5 Dec 2022
Amount
Painting over the existing poles above ground level including overhang making surface well clean and apply two coats of aluminium/ enamel paint as approved with required T & P etc as required.
Pole of 7 to 9 mtr long
with one overhang each
with two overhang each
pole of 10 to 12 mtr long
with one overhang each
with two overhang each
Painting over the existing panel including Frame level making surface well clean and apply two coats of aluminium/ enamel paint as approved with required T & P etc as required.
Painting over the existing Decorative poles above ground level including overhang making surface well clean and apply PU Paint coats paint approved brand and manufacture to give an even shade as approved with required T & P etc as required.
One or more coats on old work Pole of 3 to 5 mtr long
One or more coats on old work Pole of 5 to 8 mtr long
Supply and Fixing of Pole MS Overhang Decorative ARM with cap over and poles colour as per the direction of Engineer incharge complete as required of following height & designation. All as per pre approved by Engineer in charge.as Per Attached Drawing .
Single Arm overhang
Double Arm overhang
Provideing and Fixing weather proof round LED Rope Light type LED having 10 watts/meter capacity and consisting suitable power adapter with suitable size wire Connected to mains , switchgear and Fixing to Street Light Pole and Buildins etc complete with connection with all T&P Lift to installed on Street Light Pole and colour (Red,Yellow,Blue,Green,White,Warm White,Tri Colour (O,W,G) as per the direction & pre approved of Engineer incharge complete as required of following height & designation.
Supply of and erection Decorative MS pole as per approved design (attached) total height of the pole is 3mtr ,Bottom Section 1000mmx109mm and top section 2000mmx89mm with aluminium emblishmaent as per drawing . Pole is suitable for Single/Double arm bracket. Complete pole a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied. Approved coloured UV resist coating of mat/ glossy/ metallic finish followed after air drying of pole, square base plate having : 250x250x10mm base plate on the cement concrete foundation of M-15 grade (1:1.5:3)with the help of anchor bolts of grade 6.8.The pole shall have a weatherproof flush door and locking arrangements along with MCB on 4 way connector complete in all respect. (Approved design enclosed.)
Supply of and erection Decorative MS pole as per approved design (attached) total height of the pole is 5mtr ,Bottom Section 1000mmx137mm and top section 4000mmx76mm with aluminium emblishmaent as per drawing . Pole is suitable for Single/Double arm bracket. Complete pole a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied. Approved coloured UV resist coating of mat/ glossy/ metallic finish followed after air drying of pole, square base plate having : 200x200x10mm base plate on the cement concrete foundation of M-15 grade (1:1.5:3)with the help of anchor bolts of grade 6.8.The pole shall have a weatherproof flush door and locking arrangements along with MCB on 4 way connector complete in all respect. (Approved design enclosed.)
Supply of and erection Decorative MS pole as per approved design (attached) total height of the pole is 8mtr ,Bottom Section 5200mmx134mm and Middle section 1500mmx109mm and Bottom section 1300mmx89mm with aluminium emblishmaent as per drawing . Pole is suitable for Single/Double arm bracket. Complete pole a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied. Approved coloured UV resist coating of mat/ glossy/ metallic finish followed after air drying of pole, square base plate having : 350x350x12mm base plate on the cement concrete foundation of M-15 grade (1:1.5:3)with the help of anchor bolts of grade 6.8.The pole shall have a weatherproof flush door and locking arrangements along with MCB on 4 way connector complete in all respect. (Approved design enclosed.)
Supply and erection of Double arm Bracket 750mm overhang . Fixture is made of Mild Steel Pipe with decorative embellishment. ( as per the attached drawing).Bracket will be fixed as per attached drawing height of pole.
Ornamental 40watt LED drropdown luminaire made of aluminium housing duly powder coated/pu painted with pc/pmma clear diffuser .MCPCB having high lumen led's are mounted pressure die cast aluminium.
Supply and erection of 2000mm Double arm Bracket 1000mm overhang both side. Fixture is made of Mild Steel Pipe with decorative embellishment. ( as per the attached drawing).Bracket will be fixed as per attached drawing height of pole.
Supply and erection of MS galvanized Decorative pole as per approved design (attached) total height of the pole is 7mtr having having different profile with cast aluminum housing embellishment .Bottom profile 1000mmx140mmx4.8mm and top profile 5000mmx90x4.8xmm and top profile 5000mmx90mm*4.0mm. Pole has a service window and fixed base plate at bottom profile. Pole is primer coated and PU painted. Pole is suitable for double arm bracket, including foundation work and installation by all means.
P&I of IP65 protected ornamental 90watt LED drop down luminaire made of aluminum housing duly PU painted with PC/PMMA clear/frosted diffuser for high luminance/glare free lighting. Fixture made of powder coated die cast aluminum housing with UV stabilized PC diffuser. The System level Luminous efficacy >90 Lumen/W. Input Voltage range of 90-270V AC at 50Hz. System life of 50000 burning hours with 70% of Initial Lumens maintained. Light output in Cool white or Warm White Colour as per engineers choice. MCPCB of Osram LEDs and Philips driver .
Supply and erection of 1000mm single arm Bracket 1000mm overhang . Fixture is made of Mild Steel Pipe with decorative embellishment. ( as per the attached drawing).Bracket will be fixed as per attached drawing height of pole.
Bidder Name
Amount
Capital Construction(GSTN-08ABCPJ8098C1ZK)
Anil traders(GSTN-08ACJPK5964E1ZD)
M/s National Electric Stores(GSTN-08AAAFN8270D1ZD)
M/s National Electric Stores
Capital Construction
M/s National Electric Stores
Anil traders
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .