Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.3 LAccepted-AOC RZ H 5 NANDA BLOCK MAHAVIR ENCLAVE PART 1 PAL AM SOUTH WEST DELHI DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹11.3 L+₹62,391 (5.84%)Rejected-AOC A 303 VEENA CGHS LTD PLOT NO 5D SECTOR 22 DWARKA NEW DELHI 110077 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110077 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹11.5 L+₹80,836 (7.57%)Rejected-AOC BUILDING NO FLAT NO 19 6TH CROSS ROAD SANJEEVINI NAGAR MUDALAPALYA BANGALORE 560072 | BANGALORE | BANGALORE | KARNATAKA | 560072 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹11.9 L+₹1.2 L (11.7%)Rejected-AOC RZ 140 A EAST SAGARPUR STREET NO 7 8 NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L4 | Rejected-AOC Rejected | |
| 5 | L5₹12.9 L+₹2.2 L (21.0%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹16.4 L
EMD Value
₹32,800
Closing Date
27 Jun 2020, 6:00 pmClosed
GE U WATER SUPPLY DELHI CANTT 10
GE U WATER SUPPLY DELHI CANTT 10
PETTY REPAIR FOR ATTENDING DAY TO DAY E M EXTERNAL WATER SUPPLY COMPLAINTS IN COD DEPOT AREA 505 ABW FODDER LINE 1811 PNR COY 226 ASC SUPPLY ESD DEPOT I AND II FOL DEPOT AREA KIRBY PLACE ME LINE 15 GNR NARAINA MH LINE NSB II DGBR URI ENCLAVE 1WEC
2020_MES_348481_1
GE/WS/D-26 OF 2020-21
Open Tender
Civil Works
Item Rate
330 days
GE U WATER SUPPLY DELHI CANTT 10
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE U WATER SUPPLY DELHI CANTT 10
₹32,800
Yes
6 Aug 2020
30 May 2020
29 Jun 2020
30 May 2020
27 Jun 2020
13 Jun 2020
Amount
Attending day to day external water supply complaints of all nature i.e. leakage in water supply pipe lines, fittings/fixtures, over flow of overhead tank, no water supply including noting the complaints in complaint register complete all as specified and as directed.
Attending of Electric supply compliant of day to day maintenace of existing LT Panels including connecting electrical accessories / spares of water supply installation ,electrical fitting with lights , short circuits in Pump house as per compliant register complete all as specified & directed. Note ;- Ser No 1 & 2: Material required for attending complaints shall be measured & sparately under respectvie items here - in- after.
Notes for Srl No. 1 & 2 :- The rates quoted by the contractor shall also deemed to be included for the following :- (i) The complaints shall be attended and the defects shall be rectified by a team of experienced Electrician/Plumber as applicable assisted with adequate number of helpers, matriculation passed qualified having minimum 03 years experience . (ii) The complaints shall be attended & defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 50/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from his dues. Contractor rep shall be available wef 0800 Hrs to 2000 Hrs to recieve and notify coplained. (iii) In case , after checking & attending the defect,if it is not possible to rectify the defect within 08 hrs, the facts shall be brought to the notice of Engineer-in-charge by the contractor/his rep. If Engineer-in- charge is satisfied with contractor's view, no recovery will be made.
(iv) While attending the complaint of water supply/Electric supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A'/BOQ. However no extra payments shall be made for dewatering. (v) Cutting of GI pipe in position and threading is also deemed to be included in the job quoted rates (Fittings and fixtures shall be measured and paid separetely under respective items of Sch A/BOQ). (vi) All T&P required for attending the complaints shall be provided by the contractor without any extra. (vii) The pipe fitter shall always be in possession of die set complete with cutters,Taps, Pipe wrench ,Chain wrench, Caulking tools, complete set of spanners and ladders etc..,as required at site. (viii) The Electrician shall always in possession of all Electrician tools, LT Megger, Earth Tester, Multimeter , Crimpling tool, insulation tape, Hand gloves etc required at site. (ix) Rate for taking down/out existing & fittings & fixtures and refixing to make it functional shall be into account.
Supply only GI Socket, medium grade, ISI Marked complete all as specified and as directed of following sizes.
15 mm Bore
20 mm Bore
25 mm Bore
40 mm Bore
50 mm Bore
Supply only GI Elbow, medium grade, ISI Marked complete all as specified and as directed of following sizes.
15 mm Bore
20 mm Bore
25 mm Bore
40 mm Bore
50 mm Bore
Supply only GI Union, medium grade, ISI Marked complete all as specified and as directed of following sizes.
15 mm Bore
20 mm Bore
25 mm Bore
40 mm Bore
50 mm Bore
Supply only GI Nipple of different sizes as per requirement, both ends screwed, medium grade, ISI Marked complete all as specified and as directed of following sizes.
15 mm Bore
20 mm Bore
25 mm Bore
40 mm Bore
50 mm Bore
Supply only GI reducing socket, medium grade, ISI Marked complete all as specified and as directed of following sizes.
20 mmx15mm bore
25 mmx 15mm bore
25 mmx 20mm bore
50 mm x 40 mm bore
Supply only GI plug, solid, heavy duty, complete all as specified and as directed of following sizes
15 mm Bore
20 mm Bore
25 mm Bore
40 mm Bore
50 mm Bore
Supply only GI Tee, Medium Grade, complete all as specified and as directed of following sizes.
(a) 15mm x 15mm x 15 mm bore
(b) 20mm x 20mm x15 mm bore
(c) 20mm x 20mm x 20 mm bore
(d) 25mm x 25mm x 15 mm bore
(e) 25mm x 25mm x 20 mm bore
(f) 25mm x25mm x25 mm bore
(g) 40mm x40mmx15 mm bore
(h) 40mm x 40mm x 20 mm bore
(j) 40mmx40mmx25 mm bore
(k) 40mm x 40mm x 40 mm bore
(l) 50mm x 50mm x15 mm bore
(m) 50mm x 50mm x 20 mm bore
(n) 50mm x50mm x25 mm bore
(o) 50mm x 50 mm x 40 mm bore
(p) 50mm x 50mm x 50 mm bore
Supply only PTMT float valve, Sizes as under, with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed.
PTMT float valve, 15 mm bore
PTMT float valve, 20 mm bore
PTMT float valve, 25 mm bore
PTMT float valve, 50 mm bore
Supply Only Gun metal gate valve, with iron wheel head screwed both ends for iron pipe as per IS-778 and fixed including taking out unserviceable one, complete all as specified and as directed of following sizes.
Gun metal gate valve, 15 mm bore
Gun metal gate valve, 20 mm bore
Gun metal gate valve, 25 mm bore
Gun metal gate valve, 40 mm bore
Gun metal gate valve, 50 mm bore
Supply only lead pig bar complete all as specified and as directed.
Supply only spun yarn complete all as specified and as directed.
Supply only Lead wool complete all as specified and as directed.
Supply only 25 to 150 mm long, 6 to 20 mm dia nuts, bolts & washers complete all as specified and as directed.
Supply only 15mm bore Bib tap of PTMT, any tint, high pressure screwed for made/Female threaded for pipe of size 15mm bore complete all as specified and as directed.
Taking down GI tubing from trenches/walls & Relaying in the same position of GI tubing with connections by cleaning throughly and removal of all blockage if any , complete all as specified and as directed of following sizes:- Note:- Excavation & earth work shall be measured & paid separetely.
15 mm GI Tubing
20 mm GI Tubing
25 mm GI Tubing
40 mm GI Tubing
50 mm GI Tubing
Supplying and Laying GI pipe medium grade ISI Mark in replacement of following sizes with all fittings in old/new position in trenches/ floor and making good the disturbed surfaces as per exisitng including taking out unserviceable GI pipe, complete all as specified and directed - Note: Earth work shall be measured & paid sepreately under relevent schedule 'A' items
15 mm GI Tubing
20 mm GI Tubing
25 mm GI Tubing
40 mm GI Tubing
50 mm GI Tubing
Cutting and screwing the existing steel tubing 15mm bore to 50 mm bore for addition and alteration or lengthening screw on pipe to form connector compete all as specified and as directed.
Opening of existing sluice valve of sizes 80 to 100 mm including opening of gland cover taking out with stem nut of brass or of stainless steel & refixing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed. Note:- Spare parts shall be measured and paid separately under respective items.
Opening of existing sluice valve of sizes 150 to 200 mm including opening of gland cover taking out with stem nut of brass or of stainless steel & refixing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed. Note:- Spare parts shall be measured and paid separately under respective items.
Supply, installation and testing of water meter in replacement of 100 mm Bore, Woltman type class-B, flanged ends, with Nuts, Bolts, washers and rubber gaskets fixing in horizontal/inclind/vertical position, including cutting of pipes complete all as specified and as directed at site by the Engineer-in-Charge. Note:- Flanged joints with jointing material shall deemed to be included in the quoted unit rates.
Supply and fixing in replacement Rubber or fiber board gasket for flanged joint suitable for 80/100 mm bore pipe compete all as specified and as directed.
Supply and fixing in replacement Rubber or fiber board gasket for flanged joint suitable for 150/200 mm bore pipe compete all as specified and as directed.
Supplying, fixing, jointing and testing CI Foot valve 100 mm bore , flanged ends operation with rubber sheet, swing type, confirming to IS- 4038 complete including taking out unserviceable foot valve complete all as specified and as directed . Note :- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
Supplying, fixing, jointing and testing CI Foot valve 150 mm bore , flanged ends operation with rubber sheet, swing type, confirming to IS- 4038 complete including taking out unserviceable foot valve complete all as specified and as directed . Note :- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
Supplying, fixing, jointing & testing cast Iron Sluice Valve 100 mm bore, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top Complete with Nut, Bols Washer and Rubber Gaskets including taking out unserviceable sluice valve complete all as specified and as directed .
Supplying, fixing, jointing & testing cast Iron Sluice Valve 150 mm bore, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top Complete with Nut, Bols Washer and Rubber Gaskets including taking out unserviceable sluice valve complete all as specified and as directed .
Material and labour for painting synthetic enamel paint to pipe surface of any description over 10cm in width or girth,not otherwise described complete all as specified and directed.
Taking out/down suction pipe 80 mm to 200 mm bore from sump, of any capacity, dismantling of foot valve screwed / flanged type and re-lowering after refixing in position the same duly cleaned / minor repair, if any, required such as replacement of rubber gasket/ lifting bolts & nuts and making thread for the suction pipes off sizes etc complete all as specified and as directed.
M&L for fabrication (welding work ) of MS Header/ any size upto 300 mm MS pipe at various pump house site for arresting leakges on header complete all as specified and directed by Engineer-in-Charge.
Testing of drinking water collected from local source (bore wells /shallow wells) in the area of AGE(U) W/S No.I and submission of detailed test report to the office of Engineer-in-Charge. (i) Carrying out minimum essential testing of water as per IS 10500-2012 mandatory for chemical colour, odour, taste, turbidity, PH value, TDS total hardness, iron, chloride, fluoride and residual free chlorine and Bacteriological total coliform organisms per 100 ml (MPN) and E Coli in 100 ml) with specific recommendation regarding suitability of water for drinking purposes. (ii) Collection of water from different sources of water ie. Sump, bore wells & shallow well in a sterilized bottle and testing in NABL Approved laboratory as mentioned in specification Note :- Rate Quoted shall also deemed to be included for the followings:- (i) Cost of sterilized bottle as required. (ii) To and fro transportation charges for collection of samples from source (sump, bore & shallow wells)
Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level all as specified and as directed.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.
Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.
Surface dressing of uneven surfaces of natural ground, rough excavated surfaces not exceeding 15 cm deep and filled area where ordered shall be trimmed to an even surface horizontal or slopping, by removing vegetation and by scrapping high patches and filling low patches with the scrapping soil to given an even and neat look to the site complete all as specified and as directed.
Material and labour for well burnt Sub class 'B' bricks for UG cable protection laid in across the cable above the sand cushioning complete all as directed abd specified. complete all as specified and as directed.
Supplying and laying for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.
Supply only Switch Piano flush type 5/ 6 amps single pole one way 240 volts complete all as specified and as directed.
Supply onlyt Switch Piano flush type 15/16 amps, single pole, one way, 240 volts complete all as specified and as directed.
Supply only Switch Socket outlet 2 in 1, 3/5 pin, 5/6 amps 240 volts complete all as specified and as directed.
Supply only Switch Socket outlet 2 in 1, 3/5 pin, 15/16 amps 240 volts complete all as specified and as directed.
Supply only Switch Socket combination 2 in 1, 3/5 pin, 5/6 amps 240 volts complete all as specified and as directed.
Supply only Switch Socket combination 2 in 1, 3/5 pin, 15/16 amps 240 volts complete all as specified and as directed.
Supply only MCB,SP, 10 to 32 Amp, 240 volts complete all as specified and as directed.
Supply only MCB,SPN, 40 Amp, 240 volts complete all as specified and as directed.
Supply only PVC insulation tape role 15 mm wide , 10 Running meter long complete all as specified and as directed.
Supply only PVC insulated multistranded copper conductor wire of size 1.5 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed.
Supply only PVC insulated multistranded copper conductor wire of size 2.5 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed.
Supply only LED bulb of 7/9 watt complete all as specified and as directed.
Supply and fixing in replacement PVC insulated multistranded Aluminium conductor 1100 volts grade, cross sectional area 25 Sqmm, 3.5 core as in trenches or through floors, fixed on panels/walls with fixing arranements compete all as specified and as directed.
Supply and fixing in replacement PVC insulated multistranded Aluminium conductor 1100 volts grade, cross sectional area 35 Sqmm, 3.5 core as in trenches or through floors, fixed on panels/walls with fixing arranements compete all as specified and as directed.
Supply and fixing in replacement heat shrinkable jointkit suitable for XLPE cable insulated screened PVC bedded armoured electric power cable, heavy duty, 1100 volts grade with stranded aluminium conductor , cross sectional area 25 sqmm to 35 sqmm, 3.5 core after taking down/out faulty portion as exists complete all as specified and as directed.
Supply only 3 pole power contactor type ML-1.5, 25 Amps, 415 Volts, 50 HZ complete all as specified and as directed.
Supply only 3 pole power contactor type ML-2.0,32 Amps, 415 Volts, 50 HZ complete all as specified and as directed.
Supply only Bimetal over load realy for ML 1.5 Starter type MNX Range 14-23 Amp complete all as specified and as directed.
Supply only Bimetal over load realy for ML 2 Starter type MNX Range 20-32 Amp complete all as specified and as directed.
Supply only Fully automatic star delta starter FASD ML-1.5 415V 50 Hz 3 phase including taking down old starter complete all as specified and as directed.
Supply only Fully automatic star delta starter FASD ML-2.0 415V 50 Hz 3 phase including taking down old starter complete all as specified and as directed.
Supply only moulded case circuit breakers (MCCB), 3 Pole 415 Volt adjustable type 63 Amp with breaking capacity 25 KA complete all as specified and as directed.
Supply only moulded case circuit breakers (MCCB), 3 Pole 415 Volt adjustable type 100 Amp with breaking capacity 25 KA complete all as specified and as directed.
Supply only moulded case circuit breakers (MCCB), 4 Pole 415 Volt adjustable type 160 Amp with breaking capacity 25 KA complete all as specified and as directed.
Supply only analog type time switch FM 1/Quartz daily 240 volts , AC, 50 Hz complete all as specifed & directed
An amount of Rs 37176/- shall be deducted from BOQ on account of schedule of credit
Ridhi engineers and builders
Rahul Enterprises
Deven Associates
P.H. construction
Ashish Sehgal and Co.
V.K. Enterprises
DHAIRYAE ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .